User manual
3 Legged Thing Alan Carbon Fiber

User Manual for 3 Legged Thing Alan Carbon Fiber Monopod with DOCZ Foot Stabilizer

• Product category: Monopods 3 Legged Thing
• Brand: 3 Legged Thing
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for 3 Legged Thing Monopods

Product description

• Alan Carbon Fiber Monopod
  • 3 Legged Thing Alan Professional Carbon Fibre Monopod
  The 3 Legged Thing Alan Carbon Fiber Monopod is a 5-section support that can be used for videography and sports photography, and can be used in areas where tripods are not allowed or cannot travel. Each of the 5 sections has a twist-lock that opens with a 1/4 turn, and fully extended, the monopod reaches a maximum height of 58.7". To travel with the 1.3 lb monopod, it collapses to a closed length of 17.7", which is suitable to store in any baggage or suitcase. The top of the support features a Tri-Mount plate that allows accessories to be attched to any of the three open spurs, and a 1/4"-20 and 3/8"-16 reversible thread helps to mount either a head or camera to the top. A large rubber grip with water channels disperses moisture to maintain a firm hold on the monopod. In addition, a 3/8"-16 socket located at the bottom of the monopod allows a microphone or other accessory to attach, for use as a boom pole.
  • A 5-section support with a maximum height of 58.7" and a folded length of 17.7"
  • Twist locks open with a 1/4 turn
  • The carbon fiber monopod weighs 1.3 lb and has a load capacity of 130 lb
  • At the top of the support, a reversible 1/4"-20 and 3/8"-16 mounting thread for a head, lens, or camera
  • Tri-Mount plate with three opens spurs to attach accessories to
  • Use the monopod as a boom pole with the 3/8"-16 socket to attach a microphone or other accessories
  • The support is equipped with a large rubber grip that has water channels to disperse moisture from the grip and to maintain a firm hold on the monopod
• DOCZ Foot Stabilizer Maintain a steady monopod with the 3 Legged Thing DOCZ Foot Stabilizer, which is compatible with the Alan and Trent Monopods and with monopods that have a 3/8"-16 socket. The stabilizer's ball has tension control, which adds more drag and creates a smoother pivot when shooting a video or for tracking a fast-moving subject. Also, the adjustable ball locks into place for more stability, and the foot has a load capacity of 44 lb. the upward-folding feet reveal a rubber boot under to further maintain the weight when pressure is applied to the monopod.
  Compatibility
  • Alan and Trent monopods or monopods with a 3/8"-16 socket

• Limited 5-Year Warranty

• Limited 5-Year Warranty

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• Alan Carbon Fiber Monopod

  Mounting Screw	1/4"-20 Male, 3/8"-16 Male
  Leg Lock Type	Twist Lock
  Leg Sections	5
  Leg Diameter	1.26" / 32.00 mm
  Bubble Level	No
  Monopod Foot Features	Rubber

  Load Capacity	130 lb / 58.97 kg (Monopod)
  Maximum Working Height	58.7" / 149.1 cm
  Minimum Working Height	17.7" / 45 cm
  Folded Length	17.7" / 44.96 cm
  Materials	Aluminum Alloy, Carbon Fiber
  Weight	1.3 lb / 590 g

  Box Dimensions (LxWxH)	18.0 x 4.0 x 4.0"

• DOCZ Foot Stabilizer

  Load Capacity	44 lb / 20 kg
  Material of Construction	Aluminum, ABS
  Mounting Thread	3/8"-16

  Box Dimensions (LxWxH)	7.0 x 4.0 x 3.5"

Rating

Discussion