User Manual for ACTi 1MP Cube Camera with 4.2mm Fixed Lens and Terminal Block Click to enlarge the picture
Contents of the user manual for the ACTi 1MP Cube Camera with 4.2mm
- Product category: Wired IP Cameras ACTi
- Brand: ACTi
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for ACTi Wired IP Cameras
|
User manual for the ACTi 1MP Cube Camera with 4.2mm contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any ACTi product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official ACTi user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a ACTi product will considerably shorten its lifespan!
|
Product description The 1MP Cube Camera from ACTi features a 1/4" progressive-scan CMOS image sensor to deliver high-quality images at a resolution of up to 1280 x 720 at 30 fps. The 4.2mm fixed lens with an f/1.8 aperture provides a 53.8° horizontal field of view. Wide dynamic range, white balance, automatic gain control, and digital noise reduction features allow for clear images when there is ambient lighting or in low-light scenarios.
Motion Detection triggers an alarm when movement is detected in a designated portion of the video display, and 4 configurable privacy masking regions enable you to block certain portions of an image for security reasons. A built-in microphone and a 3.5mm jack offer two-way audio, enabling you to communicate with those you are monitoring. The camera also comes with a terminal block which allows you to attach an additional speaker and/or microphone. - Progressive scan CMOS sensor
- Minimum illumination of 0.1 lux at f/1.8
- Built-in 4.2mm lens allows you to record footage in 1MP resolution at 30 fps
- Selectable H.264 and MJPEG compression formats with dual streaming
- Two-way audio (speakers available separately)
In the Box ACTi 1MP Cube Camera with 4.2mm Fixed Lens and Terminal Block Bracket Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the ACTi 1MP Cube Camera with 4.2mm Fixed Lens and Terminal Block in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersACTi E11A Specs | Device Type | Cube Camera | | Image Sensor | 1/4" Progressive-scan CMOS | | Day/Night | No | | Minimum Illumination | Color: 0.1 lux at f/1.8 (30 IRE, 2400°K) | | Mechanical IR Cut Filter | No | | IR Sensitivity Range | No | | Electronic Shutter | 1/5 to 1/2000 sec (Manual / Auto mode) | | | | Focal Length / Aperture | 4.2mm fixed lens | | Aperture | f/1.8 | | Iris | Fixed iris | | Focus | Manual focus | | Lens Mount | CS-Mount (interchangeable lens) | | Horizontal Viewing Angle | 53.8° | | | | Compression | H.264 HP and MJPEG | | Maximum Frame Rate vs. Resolution | 30 fps at 1280 x 720 (HD 720p)
30 fps at 640 x 480 (VGA) | | Multi-Streaming | Simultaneous dual steams based on 2 configurations | | Bit Rate | 28 Kbps to 6 Mbps (per stream) | | Bit Rate Mode | Constant, Variable | | Image Enhancement | Basic WDR; White balance: automatic, hold, and manual; Brightness; Contrast; Automatic gain control; Digital noise reduction; Flicker-less | | Privacy Mask Type | 4 configurable regions | | Text Overlay | User-defined text on video | | Image Orientation | Image flip and mirror | | | | Compression | 8 kHz, Mono, PCM, 16-bit encoding; G.711 | | Audio In | Built-in Microphone | | Audio Out | 3.5mm jack | | | | Protocol | TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour | | Ethernet Port | 1, Ethernet (10/100 Base-T), RJ-45 connector | | Security | IP address filtering; HTTPS encryption; Password-protected user levels; IEEE 802.1X network access control | | | | Alarm Triggers | Video motion detection (3 regions) | | Alarm Response | Notify control center; Change camera settings; Command other devices; email notification with snapshots; upload video, snapshot to FTP server | | | | Power Source | PoE Class 2 (IEEE802.3af) | | Power Consumption | 3.15 W | | Mount Type | Wall, Ceiling | | Operating Temperature | 14 to 113°F (-10 to 45°C) | | Operating Humidity | 10 to 85% RH | | Approvals | CE, FCC | | | | Unified Solution | Fully compatible with ACTi software | | ISV Integration | Software Development Kit (SDK) available; ONVIF compliant | | Firmware Access Browser | Microsoft Internet Explorer 6.0 or newer | | Dimensions (W x H x D) | 3.8 x 3.8 x 1.8" (96 x 96 x 45.07 mm) | | Weight | 0.45 lb (0.20 kg) |
Rating50% users recommend this product to others. And what about you?
This product has already been rated by 60 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
