User Manual for ACTi V21 1-Channel 960H D1 H.264 Video Encoder with Analog Video Output Click to enlarge the picture
Contents of the user manual for the ACTi V21 1-Channel 960H D1 H.264
- Product category: Video Encoders & Decoders ACTi
- Brand: ACTi
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for ACTi Video Encoders & Decoders
|
User manual for the ACTi V21 1-Channel 960H D1 H.264 contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any ACTi product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official ACTi user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a ACTi product will considerably shorten its lifespan!
|
Product description The ACTi V21 1-Channel 960H/D1 H.264 Video Encoder with Analog Video Output allows the integration of a single analog CCTV camera in an already existing IP infrastructure. H.264 compression technology allows you to save on storage space while also minimizing the bandwidth requirement for operations. This encoder is capable of simultaneous dual streaming of videos in up to D1 resolutions at 25/30 fps in H.264 and MJPEG formats. It features a microSDHC memory card slot (card not included) for on-board storage.The encoder supports PoE (Power over Ethernet), allowing you to power the encoder from the network itself, without any extra wiring or power supplies. It also features an active tampering alarm that immediately sends an email notification when trigged. Password protection adds another layer of security by providing access to only authorized users. - 25/30 fps at Full D1 resolution
- Selectable H.264 HP, MJPEG compressions
- Digital input and digital output (via terminal block, included)
- Serial ports for PTZ control (via terminal block, included)
- Operating temperature ranges from 14 to 122°F (-10 to 50°C)
UPC: 888034004887 In the Box ACTi V21 1-Channel 960H/D1 H.264 Video Encoder with Analog Video Output Power Terminal Block Audio Terminal Block Serial Communication Terminal Block Digital Input / Output Terminal Block Screw Pack Limited 3-Year Warranty Brochure PDF 989.2kbuzbfyfwqudutxq Table of Contents
|
Upload User Manual
Have you got an user manual for the ACTi V21 1-Channel 960H D1 H.264 Video Encoder with Analog Video Output in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersACTi V21 Specs | | | Type | Video encoder | | Number of Channels | 1 | | | | Protocol | Sony VISCA, Pelco-D, Pelco-P | | Control | Remote manual control; 32 preset points; 10 preset tours | | | | Compression | H.264, MJPEG | | Maximum Frame Rate vs. Resolution | 30 fps at 960 x 480 (NTSC); 25 fps at 960 x 576 (PAL)
30 fps at 720 x 480 (Full D1, NTSC); 25 fps at 720 x 576 (Full D1, PAL) | | Multi-Streaming | Simultaneous dual streams based on two configurations | | Bit Rate | 28 kb/s to 6 Mb/s (per stream) | | Bit Rate Mode | Constant, Variable | | Image Enhancement | Brightness; Saturation; Contrast; Hue; Sharpness; Deinterlacing | | Privacy Masking | 4 regions | | Text Overlay | User defined text on video | | Image Orientation | Image flip; image mirror | | | | Compression | 8 kHz, Mono, PCM, 16-bit encoding, G.711 | | Audio Input | 1, via terminal block | | Audio Output | 1, via terminal block | | | | Protocols | TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour, Sony VISCA, Pelco D, Pelco P | | Ethernet Port | 1 x 10/100 Base-T Ethernet, RJ45 connector | | Security | IP address filtering; HTTPS encryption; Password protected user levels; Anonymous login | | | | Alarm Triggers | Video motion detection (3 regions); External device through digital input | | Alarm Response | Notify control center; Go to PTZ preset point or preset tour; Change camera settings; Command other devices; E-mail notification with snapshots; Save video or snapshot to local storage, Upload video, snapshot to FTP server; Activate external device through digital output | | | | Analog Video Input | 1 x CVBS, 1 Vpp with 75 Ω BNC connector | | Analog Video Output | 1 x CVBS, 1 Vpp with 75 Ω BNC connector | | Digital Input | 1, via terminal block | | Digital Output | 1, via terminal block | | Serial Port | RS-485, RS-422, RS-232, terminal block | | Local Storage | microSDHC/SDXC memory card slot (card not included) | | | | Unified Solution | Fully compatible with ACTi software | | ISV Integration | Software Development Kit (SDK) available; ONVIF compliant | | Firmware Access Browser | Microsoft Internet Explorer 8.0 or newer (full functionality);
Safari with QuickTime installed, and other browsers with VLC installed (partial functionality) | | | | Power Source | PoE Class 3 (IEEE802.3af)
12 VDC (adapter not included) | | Power Consumption | PoE: 3.36 W
12 VDC: 3 W | | Operating Temperature | 14 to 122°F (-10 to 50°C) | | Operating Humidity | 10 to 85% RH | | Approvals | CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B) | | Dimensions (W x H x D) | 5.4 x 1.4 x 4.8" (137.0 x 35.5 x 121.8 mm) | | Weight | 0.977 Ib (0.442 kg) | | | | Package Weight | 1.7 lb | | Box Dimensions (LxWxH) | 7.9 x 7.9 x 3.5" |
Rating60% users recommend this product to others. And what about you?
This product has already been rated by 79 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
