User manual
Adam Professional Audio T5V 5" Studio

User Manual for Adam Professional Audio T5V 5" Studio Monitors, Isolation Pads, and Monitor Controller Kit

• Product category: Studio Monitors Adam Professional Audio
• Brand: Adam Professional Audio
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Adam Professional Audio Studio Monitors

Product description

• 2 x Adam Professional Audio T5V T-Series Active Nearfield Monitor (Single)
  • ADAM Audio T5V - Active Nearfield Monitor
  The single, Adam Professional Audio T-Series T5V is an affordable, high-quality, near-field, active studio monitor well suited for project studios, commercial recording facilities, and broadcast environments. The speaker features Adam's U-Art 1.9" accelerated ribbon tweeter with HPS waveguide and a 5" polypropylene woofer with a rear-firing bass-reflex port. The unit is bi-amped with 50W allocated to the woofer, while 20W powers the tweeter, which combine to provide a frequency response of 45 Hz to 25 kHz and a maximum SPL of 106 dB. The rear panel offers XLR and RCA connections with controls for input sensitivity, gain, high-shelf (-2, 0, +2 dB), and low-shelf (-2, 0, +2 dB). The Adam Professional Audio T5V ships with a power cord.
  • • U-ART 1.9" Accelerated Ribbon Tweeter
      • Allows longer operation with fewer signs of fatigue
      • Breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
      • Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)
    • Air velocity ratio of 4:1 during the sound generation by folded U-ART membrane
      • Direct, fast response in the high-range even with complex transients
    • HPS waveguide from the S Series
      • Makes dispersion more consistent and imaging more stable over a wider area
      • Reduction of early reflections on the surfaces of mixing consoles, desks, and more
    • Lightweight polypropylene construction of the woofer
      • Excellent transient response even at high sound levels without breakup of the diaphragm
    • Vertical 2-way system with 5" woofer
      • High resolution of the stereo image
    • Rear-firing bass reflex port
      • Bass reproduction with very low compression
    • Linear frequency response of 45 Hz to 25 kHz
      • Unbiased reproduction in a wide frequency band
    • Maximum peak sound pressure per pair in 3.3' (1 m) 106 dB
      • Powerful, compression-free sound reproduction even at very high sound levels
    • DSP-powered crossover design
      • Smooth frequency response without interference between the drivers in the critical midrange
    • Simple room acoustic adjustments via high- and low-shelf filters
      • Allows optimal adaptation to acoustically difficult listening environments or individual preferences
    • Analog inputs over XLR and RCA
      • Optimized for balanced and unbalanced line signals
    • Acoustically optimized cabinet geometry
      • Reduction of unwanted reflections on the cabinets
• 2 x Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable - 6' (1.8 m), Black
  • ADAM Audio T5V - Active Nearfield Monitor
  The Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable (6') is a studio-quality cable for connecting mics to mixers, preamps, audio interfaces and recorders; or to be used in any other application where XLR connectivity is required. The cable is engineered to be both quiet and durable, and is well-suited for critical recording and broadcast situations.
  
  Studio Elite 4000 Series cables are made from 24 AWG OFC copper wire that's wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. A 98% braided outer shield makes the cable resistant to EMI and RFI noise. The Neutrix XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection.
  • 98% braided shield offers protection from EMI and RFI noise.
  • Twin-conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable's signal from radiating and affecting nearby cables, and also helps prevent external EMI from penetrating to the cable's core.
  • 24 AWG oxygen-free stranded copper inner core provides the best possible conductivity.
  • Cotton yarn reduces electrostatic and microphonic noise.
  • All solder points shrink-wrapped for protection.
  • Neutrik XX silver connectors offer high conductivity.
  • Cast zinc shell and chuck style strain relief.
  UPC: 847628551169
• Senal PMC-II Passive Monitor Controller
  • ADAM Audio T5V - Active Nearfield Monitor
  The PMC-II Passive Monitor Controller from Senal is for anyone using powered monitors that needs a precise and easy way to control monitor volume. Featuring XLR/TRS combo inputs as well as TRS stereo mini-jack inputs, the controller is compatible with a variety of professional and consumer audio equipment, and it can be used anywhere a separate volume controller is needed. Designed to be inserted between powered monitors and a computer, a sound card, or an audio interface, the PMC-II adds the convenience of accurately adjusting your monitors' volume without having to access the computer or sound card's volume control. In addition, it is equipped with a 1/8" TRS stereo mini-input jack and is compatible with any smartphone, tablet, MP3 player, or device with a stereo mini-jack output. The PMC-II's passive design won't alter or color the sound originating from the computer or device that it is connected to. Built with a steel housing and solid wood panels, the PMC-II is an effective, stylish, and dependable addition to any workstation or studio.
  Precision Volume Control
  • The PMC-II allows you to accurately adjust the volume of your monitors without having to access your computer or sound card's volume controls
  Passive Design
  • There is no need for a power supply to operate it, and thanks to its passive design, it doesn't alter or color the original sound from your computer or other device
  Multiple Inputs
  • XLR/TRS combo and 1/8" stereo mini inputs offer compatibility with computers, sound cards, and portable devices with a 1/8" stereo output such as an iPhone or tablet
  Multiple Outputs
  • XLR and 1/8" stereo mini-jack outputs ensure compatibility with several monitor formats for professional, project, or home studio applications
  Oversize Control Knob
  • The oversize control knob ranges from 0 to -85 dB of attenuation so that you can easily and accurately control monitor volume
  Mute Button
  • A mute button allows you to quickly silence the output
  Mono Button
  • The mono button is ideal for listening to mixes in mono to check for balance or phasing issues
  Steel Housing
  • The PMC-II is a durable and stylish addition to any workstation or studio
  UPC: 847628594135
• 2 x Auray IPRS-M Stabilizing Isolation Pad for Studio Monitors (Medium, Single)
  • ADAM Audio T5V - Active Nearfield Monitor
  The medium IPRS-M Stabilizing Isolation Pad from Auray is a speaker decoupling system that is designed to tighten the response of your studio monitors by reducing reverberation and unwanted resonance, greatly improving your monitor speaker's performance. It is constructed of high-quality acoustic foam, a steel plate, and a thin layer of neoprene.The IPRS-M features high-density, open-cell foam that decouples your monitor from its resting surface by absorbing the monitor's vibrations, eliminating the transmission of speaker-cabinet vibration to the surface they are resting on. In addition to its decoupling capabilities, the precision-cut steel plate prevents back to front speaker cabinet motion (recoil), by creating a surface too heavy for the monitor's recoil to move. The nonslip neoprene layer helps prevent resonance of the steel plate and keeps the monitor securely in place atop the Stabilizing Isolation Pad.These three layers work together to prevent back-to-front speaker cabinet motion and eliminate the transmission of vibrations, resulting in a tighter and more accurate response, especially in the bottom end.
  • Stabilizes speaker cabinet and eliminates back-to-front motion
  • Isolates by preventing resonant coupling for greater depth of field
  • Tightens up the bass response for improved accuracy and allows for a higher level of detail across the frequency spectrum
  • Provides 3/4" down-fire or up-fire profile
  UPC: 847628564190

• 2 x T5V T-Series Active Nearfield Monitor (Single) easfxdaycvcxbqtc
• Power Cord
• Limited 2-Year Warranty, Extended to 5-Years with Registration

• 2 x Kopul - Studio Elite 4000 Series XLR M to XLR F Microphone Cable - 6' (1.8 m), Black

• Senal - PMC-II Passive Monitor Controller

• 2 x Auray - IPRS-M Stabilizing Isolation Pad for Studio Monitors (Medium, Single)

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• 2 x Adam Professional Audio T5V T-Series Active Nearfield Monitor (Single)

  Woofer	Number: 1 Basket Ø: 5.0" / 127.0 mm Cone Material: Polypropylene
  Tweeter	Number: 1 Type: U-ART Diaphragm Area: 4.0" / 101.6 mm Equiv. Diaphragm Ø: 1.9" / 48.3 mm Velocity Transform Ratio: 4:1 Diaphragm Weight: 0.006 oz / 0.17 g Waveguide: HPS
  Amplifier	Number: 2 Woofer: 1 Type: PWM (Class-D) Amplifier Power RMS: 50 W Tweeter: 1 Type: PWM (Class-D) Amplifier Power RMS: 20 W
  Control Options	Input Sensitivity: Switchable +4 dBu / -10 dBV Gain: Yes High-Shelf: -2, 0, +2 dB Low-Shelf: -2, 0, +2 dB
  Input Connectors	Analog: XLR, RCA Input Impedance: 10 kOhm / 20 kOhm
  Frequency Response	45 Hz to 25 kHz
  THD	THD > 80 Hz: 0.5 %
  Maximum SPL	Maximum SPL: ≥106 dB (per pair at 3.3 / 1.0 m)
  Crossover	3 kHz
  Power	AC Mains Inputs Voltage: 100 to 240 VAC 50/60 Hz
  Maximum Power Consumption	132 W
  Dimensions (H x W x D)	11.7 x 7.0 x 11.7" / 297.2 x 177.8 x 297.2 mm
  Weight	12.6 lb / 5.7 kg

  Box Dimensions (LxWxH)	15.4 x 14.7 x 9.9"

• 2 x Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable - 6' (1.8 m), Black

  Connector 1	3-Pin XLR Male
  Connector 2	3-Pin XLR Female
  Cable Length	6' / 1.8 m
  Shielding	98% Braid
  Wire Gauge	24 AWG
  Contact Plating	Silver

  Box Dimensions (LxWxH)	8.8 x 5.9 x 1.1"

• Senal PMC-II Passive Monitor Controller

  Product Type	Monitor controller
  Design	Passive
  Channels	2
  Input Connections	2 x XLR/1/4" (6.3 mm) TRS combo 1/8" (3.5 mm) stereo TRS mini-jack
  Output Connections	2 x XLR 1/8" (3.5 mm) stereo TRS mini-jack
  Line Output Level	Max: 20 dBu
  Output Level	-20 dB
  Output Impedance	600 Ohms
  Input Impedance	10,000 Ohms balanced, 5000 Ohms unbalanced
  Frequency Response	10 Hz to 40 kHz
  Total Harmonic Distortion	0.001%
  Attenuation	85 dB (attenuator) 112 dB (attenuator and mute)
  Controls	Volume knob, mute button, mono button
  Dimensions (H x W x D)	2.4 x 6.4 x 3.3" (6.2 x 16.4 x 8.5 cm)
  Weight	1.6 lb (726 g)

  Box Dimensions (LxWxH)	8.0 x 3.8 x 3.2"

• 2 x Auray IPRS-M Stabilizing Isolation Pad for Studio Monitors (Medium, Single)

  Dimensions

  10.25 x 12.75" (26.3 x 32.3 cm)

  Box Dimensions (LxWxH)	13.4 x 10.6 x 3.3"

Rating

Discussion