User manual
AMT HR3 Harmonica Microphone with Wi5IIB

User Manual for AMT HR3 Harmonica Microphone with Wi5IIB Belt-Pack Wireless System

• Product category: Wireless Systems AMT
• Brand: AMT
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for AMT Wireless Systems

Product description

• HR3 Harmonica Microphone System The HR3 from Applied Microphone Technology is a professional-quality harmonica mic that's designed to provide the most natural sound possible. Unlike other harmonica mics, the HR3 has a unique adjustable clamp that allows it to be used with a variety of harmonicas, from diatonic to 16-hole.
  
  The HR3 features Disconnecting Cable Technology, which allows easy cable replacement, and also provides the ability to interface with various wireless systems, such as the Wi5C beltpack. The mic comes with an inline preamp, which can be placed on the floor, clipped to a belt, or placed in a pocket. The preamp requires phantom power, and features a low frequency rolloff filter, as well as a 10dB pad. A soft carrying pouch is included. Note: Each HR3 is made by hand and colors may vary. You may receive a black or a red model.
  • Unique adjustable clamp allows the mic to be used with a variety of harmonicas, from diatonic to 16-hole
  • Disconnecting Cable Technology allows easy cable replacement, and also provides the ability to interface with various wireless systems, such as the Wi5C beltpack
  • Inline preamp features a low frequency rolloff filter and a 10dB pad. The preamp requires phantom power and can be placed on the floor, clipped to a belt, or placed in a pocket
  • Soft carrying pouch included
  • Made by hand in the USA
• WI5IIB Belt-Pack Wireless System The AMT WI5IIB Belt-pack Wireless System is suitable for any player looking for a multi-channel belt pack wireless system. It clips to a belt and creates a belt-pack free-playing experience that will change the way an instrumentalist performs. It allows roaming the stage without being connected to wires and creates the freedom to move.The Wi5IIB System includes a Wireless Belt-Pack Transmitter, a ZRIII Multi-Channel Dual Receiver, cable for connections to AMT microphones, and a case. It features volume control, as well as the standard Wi5II mute button. This system will connect to all AMT Microphone’s and disconnect models, as well as older W-Sennheiser models without D.C.T. / disconnecting cable technology.The ZRIII Multi-Channel Dual Receiver is a 99-channel capable receiver that will allow 2 microphone / transmitter setups to be used with 1 receiver. It includes 2 separate outputs on the back panel for complete control over each microphone / transmitter channel.
  Dual Receiver
  • The ZRIII Receiver allows 2 microphone / transmitter setups to be used with 1 receiver. The ZRIII receiver includes 2 separate outputs on the back panel for complete control over each microphone / transmitter channel.
  Multi - Channel
  • The WI5II B includes ninety-nine selectable channels. Control of the channels is changed via infrared controls from the receiver to the transmitter.
  Clip-On
  • Since the transmitter will clip on to all AMT models, it is very simple to use your microphone wired with any of the available AMT preamps. If you are a doubler and require multiple microphones, the same transmitter can be changed from microphone / instrument to 2nd and even 3rd setup. Use 2 setups at the same time.
  Rechargeable Battery
  • The WI5II B transmitter includes a lithium-ion rechargeable battery which can be recharged over 1000 times and gives 7 to 8 hours of continuous use.
  Digital LCD Displays
  • Both the transmitter and receiver include illuminated LCD displays for easy visibility on dark stages, or poorly lit clubs or concert halls.
  Detachable Antennas
  • Detachable antennas allow for the addition of a rack and booster kit.
  Mute and On / Off Button
  • The WI5II B transmitter includes a mute button as well as an On / Off switch for saving battery life on the breaks.
  Audio Outputs
  • The rear panel of the ZRIII receiver includes an A & B Output for each side of the Dual receiver. A 0.25" (0.64) output is also included which parallels output A.

  Receiver Features

  • UHF 600 to 930 MHz band to avoid interference
  • Automatic frequency scan searches for available frequencies
  • PLL system
  • Preset ninety-nine non-interfered channels
  • Adjustable 560 free frequencies
  • LCD display, shows the RF level, AF level, channel, and frequency
  • High efficiency battery design, the microphone can be used continuously for 6 hours
  • Using high gain antenna, 164.04' (50.00 m) range at the clearing
  • Half rack space design, 2 systems can be connected to complete 1 full rack space

• Adjustable Clamp

• Carrying Pouch

• Preamp

• 1-Year Limited Warranty

• Wireless Belt-Pack Transmitter

• ZRIII Multi-Channel Dual Receiver

• Cable for Connections to AMT Microphones

• Lithium-Ion Rechargeable Battery

• Case

• Limited 1-Year Warranty

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• HR3 Harmonica Microphone System

  Box Dimensions (LxWxH)	10.7 x 4.4 x 3.3"

• WI5IIB Belt-Pack Wireless System

  Carrier Frequency	UHF 600 to 930 MHz
  Frequency Stabilization	< ± 30 ppm
  Dynamic Range	> 95 dB
  Total Harmonic Distortion	< 0.5%
  Frequency Response	40 to 15 Hz ± 3 dB
  Output Level	Audio: Balance 400 mV - Unbalance 400 mV

  Power Supply	15 to 17 VDC
  Power Consumption	2 W
  Signal to Noise Ratio	> 95 dB
  Image and Spurious Rejection	> 80 dB
  Border Upon Channel Rejection	> 80 dB
  Receiving Sensitivity	5 dB uV
  De-Emphasis	50 uS

Rating

Discussion