User manual
Angler 1-Light Fashion Kit

User Manual for Angler 1-Light Fashion Kit

• Product category: Monolights Others
• Brand: Others
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Others Monolights

Product description

• Angler Glamour Flash 300Ws Monolight The Glamour Flash 300Ws Monolight from Angler combines affordability with dependable basic functionality. Power is adjustable from 1/16 to Full power over four stops via touchpad buttons. Settings are displayed on the large LED screen. The 100W modeling lamp can be set from full power for maximum visibility to Proportional to simulate power adjustments to enable previewing of your shot. Recycling is a fast 2 seconds and far shorter at reduced power settings. The Glamour Flash has an industry standard 5/8" receiver that mounts to a wide variety of light stands while the housing is rubber-coated to provide a grippy surface and protection from impact damage. The flash head can be triggered with the head's test button, a built-in wireless optical slave or with the included sync cord. The Glamour Flash comes with a user-replaceable flash tube, power cord, 100W modeling lamp, 7" grid reflector and a protective cap.
  LED Screen
  • Highly visible LED screen makes the power setting adjustment easy even in dim light
  Adjustable Power
  • Power is adjustable from over 4 stops from 1/16 to Full power
  Touchpad Control
  • Easy to use touch pad instead of switches
  Modeling Lamp
  • Full on mode can be adjusted to proportional mode that automatically matches the flash power so you can preview your lighting
  Auto Dump
  • Flash automatically drains capacitors for accurate exposures when lowering the power
  Rubber Coating
  • Provides a grippy surface and helps protect the flash from impact damage
  Optical Slave
  • Good for multi-light setups, the built-in slave allows the flash to be wirelessly triggered from another flash
  Included Sync Cord
  • The 1/8" (3.5mm) mini-plug sync cord connects camera to flash or optional radio receiver
  UPC: 847628589247
• Impact Air-Cushioned Light Stand (Black, 8') This aluminum Impact Air-Cushioned Light Stand rises to a height of 8' and folds down to 29.6". The stand has sure-twist section locks and 4 sections and will support up to 8 lb. If you forget to tighten any section with your light mounted, the light slowly descends, thanks to the air-cushioned action. This useful feature saves equipment and fingers from harm during busy photo sessions.
  Air Cushioned
  • Protects equipment from impact damage.
  Compact Design
  • Will fit easily into most location cases.
  Accepts Casters
  • Eases positioning of heavy lights.
  • Available as accessories.
  UPC: 847628012349
• Angler Beauty Reflector (16") The 16" Beauty Reflector from Angler gets its name from the popularity of this light shaper with fashion and portrait photographers. Recommended for strobes, the light source is bounced off of a centrally positioned deflector and directed to fill the neutral white reflector interior. The result is a signature soft dispersed look, but with crispness, ideal for hair and makeup, that you can't get from umbrellas and softboxes. An added feature is the natural-looking catchlights that appear in the subject's eyes. Optional accessories include a honeycomb grid to tunnel and direct the light output and a diffusion sock to soften it. Adapters are available for the following studio flash units: Paul C. Buff Alien Bee, Einstein, White Lightning, and Zeus; Balcar; Flashpoint, Elinchrom, Impact EX, Calumet Genesis, Interfit EX and Stellar, Bowens; Calumet Travelite, Cowboy, JTL, Photoflex; Rime Lite, Impact monolights, Westcott and Profoto.
  Compatibility
  • Paul C. Buff Alien Bee, Einstein, White Lightning, and Zeus; Balcar; Flashpoint, Elinchrom, Impact EX, Calumet Genesis, Interfit EX and Stellar, Bowens; Calumet Travelite, Cowboy, JTL, Photoflex; Rime Lite, Impact monolights, Westcott and Profoto
  Optional Accessories
  • Diffuser sock and honeycomb grid
  Unique Qualities
  • Natural-looking catchlights in subject's eyes
  • Soft but crisp quality of light
  UPC: 847628589674
• Angler Beauty Reflector Grid (16") This Grid for the 16" Beauty Reflector from Angler is a matte black aluminum light shaping accessory that snaps onto the reflector and reduces its wide beam to 40°. The grid controls spill light and gives the user more directional control while adding a bit of contrast to the light quality for a more painterly look. UPC: 847628588882
• Impact Beauty Dish Adapter for Impact Monolights, Bowens, Travelite, Cowboy, Interfit Stellar, JTL, Photoflex, Rime Lite, Westcott Flash Heads This Impact Beauty Dish Adapter for Impact Monolights, Bowens, Travelite, Cowboy, Interfit Stellar, JTL, Photoflex, Rime Lite, Westcott Flash Heads features durable aluminum alloy construction and mounts quickly onto the flash head, allowing you to use 16", 20", 22", and 27" Impact Beauty Dishes on your studio flash. It is compatible with Bowens, Calumet Travelite, Cowboy, Impact VC-VS-VSD Monolights, Interfit Stellar, JTL, Photoflex, Rime Lite and Westcott Photo Basics flash heads. UPC: 847628551848

• Glamour Flash 300Ws Monolight aeebwdvytrweuacaxbexawfr
• Modeling Light (100W)
• Grid Reflector (7")
• Mini to PC Sync Cord
• Protective Cap
• User Manual
• Limited 1-Year Warranty

• Impact - Air-Cushioned Light Stand (Black, 8') aeebwdvytrweuacaxbexawfr

• Beauty Reflector (16")

• Beauty Reflector Grid (16")

• Impact - Beauty Dish Adapter for Impact Monolights, Bowens, Travelite, Cowboy, Interfit Stellar, JTL, Photoflex, Rime Lite, Westcott Flash Heads

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• Angler Glamour Flash 300Ws Monolight

  Maximum Power	300 Ws
  Power Control	4 Stops in 1/10-Stop Increments
  Guide Number	180.4' / 55 m at 6.56' / 2 m, ISO100 with Reflector
  Flash Duration	1/1800 to 1/800 Sec
  Recycle Time	2 Sec (Full Power)
  Color Temperature	5600K ± 200K
  Flash Ready Indicator	Audio, Visual
  Reflector	Changeable
  Accessory Fitting Type	Bowens S Type

  Type	Tungsten
  Wattage	100 W
  Control Modes	Full On, Proportional

  Sync Type	Button, Cable, Optical
  Sync Voltage	4.3 V

  AC Input Voltage	110to120 VAC, 60 Hz
  Circuit Protection	Fuse
  Fuse	6 A

  Display	None
  Mount	5/8" / 16 mm Receptacle
  Auto Dump	Yes
  Fan Cooled	No
  Dimensions	H: 8.4 x W: 6.1 x L: 11.6" / H: 21.3 x W: 15.5 x L: 29.5 cm, Including Reflector H: 8.4 x W: 5.2 x L: 11.6" / H: 21.3 x W: 13.2 x L: 29.5 cm, Including Cap
  Weight	3.5 lb / 1.58 kg

  Box Dimensions (LxWxH)	21.5 x 10.5 x 6.5"

• Impact Air-Cushioned Light Stand (Black, 8')

  Maximum Load	8 lb (3.6 kg)
  Leg Tip	20 mm
  Attachment Size	5/8" Stud with 1/4"-20 in threaded tip
  Accepts Wheels	Yes
  Air Cushioned	Yes
  Maximum Height	96" (243.8 cm)
  Minimum Height	34" (86.3 cm)
  Folded Height	29.6 (75.2 cm)
  Footprint Diameter	36" (91.4 cm)
  Weight	2.05 lb (1 kg)

  Box Dimensions (LxWxH)	29.75 x 3.2 x 3.15"

• Angler Beauty Reflector (16")

  Shape	Circular
  Interior	White
  Accepts Grids	Yes
  Requires Speed Ring / Adapter	Yes, Not Included
  Umbrella Mount	No
  Material	Aluminum
  Dimensions	Rating 90% users recommend this product to others. And what about you? This product has already been rated by 46 owners. Add your rating and experience with the product. Discussion Ask our technicians if you have a problem with your settings, or if anything is unclear in the user manual you have downloaded. You can make use of our moderated discussion. The discussion is public and helps other users of our website who may be encountering similar problems. The discussion is empty - enter the first post Post a new topic / query / comment: Items marked with * are required. Your name *: E-mail : Subject *: Message *: Your email address will not be displayed. Do not forget to fill it in if you want to receive a reply to your enquiry/contribution. Processing of personal data in accordance with GDPR