|
User Manual for Angler Two 300Ws Monolight Studio Kit Click to enlarge the picture
Contents of the user manual for the Angler Two 300Ws Monolight Studio Kit
- Product category: Monolights Angler
- Brand: Angler
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Angler Monolights
|
User manual for the Angler Two 300Ws Monolight Studio Kit contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Angler product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Angler user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Angler product will considerably shorten its lifespan!
|
Product description has put together this Angler Two Monolight Umbrella and Softbox Kit for photographers who require a core kit with a soft quality of light and manageable contrast for portraiture, fashion, or product work that they can take on the road. The kit contains two 300Ws Angler Glamour Flash Monolights, each with a 7" grid reflector and an 8' air-cushioned light stand. The kit's soft light modifiers include a 24 x 32" softbox with speed ring, and a 43" White Translucent Umbrella, while the included 40-degree grid fits the reflector and facilitates selective lighting. An included Background Reflector has a unique shape that, as the name implies, is designed to light backgrounds, but you can also light a subject from behind to separate them from the background. It all fits in the provided padded case. - 2 x Angler Glamour Flash 300Ws Monolight The Glamour Flash 300Ws Monolight from Angler combines affordability with dependable basic functionality. Power is adjustable from 1/16 to Full power over four stops via touchpad buttons. Settings are displayed on the large LED screen. The 100W modeling lamp can be set from full power for maximum visibility to Proportional to simulate power adjustments to enable previewing of your shot. Recycling is a fast 2 seconds and far shorter at reduced power settings. The Glamour Flash has an industry standard 5/8" receiver that mounts to a wide variety of light stands while the housing is rubber-coated to provide a grippy surface and protection from impact damage. The flash head can be triggered with the head's test button, a built-in wireless optical slave or with the included sync cord. The Glamour Flash comes with a user-replaceable flash tube, power cord, 100W modeling lamp, 7" grid reflector and a protective cap.
- LED Screen
- Highly visible LED screen makes the power setting adjustment easy even in dim light
- Adjustable Power
- Power is adjustable from over 4 stops from 1/16 to Full power
- Touchpad Control
- Easy to use touch pad instead of switches
- Modeling Lamp
- Full on mode can be adjusted to proportional mode that automatically matches the flash power so you can preview your lighting
- Auto Dump
- Flash automatically drains capacitors for accurate exposures when lowering the power
- Rubber Coating
- Provides a grippy surface and helps protect the flash from impact damage
- Optical Slave
- Good for multi-light setups, the built-in slave allows the flash to be wirelessly triggered from another flash
- Included Sync Cord
- The 1/8" (3.5mm) mini-plug sync cord connects camera to flash or optional radio receiver
UPC: 847628589247 - Impact White Translucent Umbrella (43") Umbrellas soften, broaden, and diminish the light output of any flash light source. Umbrellas with a white interior will soften and weaken light more than an umbrella with a silver lining. A white umbrella without a black backing may also be used as a makeshift softbox, although the use of the light will not be as efficient as with a lightbox.Choosing umbrella size is determined by the size of the subject, and the strength of the light supply being used. Choosing an umbrella surface is as subjective as choosing a paint and brush.This Impact 43" White Translucent Umbrella is suggested for use in mid-length portraits for one or two persons. UPC: 847628013292
- Impact Luxbanx Medium Rectangular Softbox (24 x 32") The Luxbanx Medium Rectangular Softbox from Impact is an economical 24 x 32" light shaping tool for strobes that's ideal for small sets, single or dual portraits, half to three-quarter length fashion, and general product photography. The softbox features a soft white interior, removable front diffuser and removable inner baffle. The diffuser and baffle can be used together for maximum softening of the output. Removing the inner baffle will give you a more crisp light quality with higher contrast, while shedding the front and inner diffusers turns the Luxbanx into a large reflector with maximum brightness and contrast. The versatile Luxbanx has an additional control via an optional fabric grid which mounts to the recessed lip of the softbox with touch-fasteners. The grid narrows and concentrates the light's beam forward, controlling spill and adding directional control to the Luxbanx's attributes. Every Luxbanx comes with a carrying case and a spare Flex Rod. Separate purchase of a speed ring that matches your strobe's mount is required for use. Impact makes models to fit most popular brands. UPC: 847628561892
- Angler Speed Ring for Bowens S, Impact, Westcott, and Aputure The Speed Ring for Bowens S, Impact, Westcott Strobes, and Aputure Lights from Angler features indexed flex rod holes that allow you to effortlessly mount any square, rectangular, strip, or octagonal Luxbanx softbox to Impact, Bowens S, Westcott, and Aputure heads. The ring will also fit most other brands of softbox. The sturdy all-metal ring rotates 360 degrees to facilitate orientation or to clear obstacles in tight quarters. It has 3/8"-16 taps on two sides to allow mounting directly to grip gear such as Impact's Swivel Umbrella Adapter, 3 Section Double Articulated Arm, Super Clamp, and more. UPC: 847628008588
- 2 x Impact Air-Cushioned Light Stand (Black, 8') This aluminum Impact Air-Cushioned Light Stand rises to a height of 8' and folds down to 29.6". The stand has sure-twist section locks and 4 sections and will support up to 8 lb. If you forget to tighten any section with your light mounted, the light slowly descends, thanks to the air-cushioned action. This useful feature saves equipment and fingers from harm during busy photo sessions.
- Air Cushioned
- Protects equipment from impact damage.
- Compact Design
- Will fit easily into most location cases.
- Accepts Casters
-
- Eases positioning of heavy lights.
- Available as accessories.
UPC: 847628012349 - Impact 7" Grid (40°) The 40° Impact 7" Grid helps you control your light more precisely: this honeycomb grid, which will fit any standard 7" grid reflector (other than Broncolor or Profoto), gives you a 40° beam of light, perfect for an accent light or spot. A tension spring can stretch or arch to fit the reflector.
- Fits standard 7" grid reflectors (other than Broncolor or Profoto)
- Gives you a 40° beam of light
UPC: 847628011632 - Impact Background Reflector for Impact/Bowens Mount Strobes This Impact Background Reflector for Impact/Bowens Mount Strobes is a sconce-shaped light modifier that outputs an oval, fan-like beam of light that is ideal for placing behind the subject for even lighting of the background. Alternately, you can place it closer to the background for a corona or graduated effect or backlight the subject to separate him or her from the background. The reflector has handy clips to attach gels and diffusion material and a rotation mechanism that allows you to vary the direction of the light. The Background Reflector is compatible with Impact Monolights, Bowens, Travelite, Cowboy, Interfit Stellar, JTL, Photoflex, Rime Lite, and Westcott flash heads.
- Includes clips for mounting accessories
- Projects an oval of light on your background
- Can also be used for backlighting
UPC: 847628551626 - Impact Light Kit Bag #2 (34 x 13.5 x 12") The black Light Kit Bag #2 (34 x 13.5 x 12") from Impact makes transporting your lighting kit easy and secure. The bag is designed to hold three monolights along with their reflectors (such as Impact VC500LR), four stands, boom, umbrellas, cables and other support gear but can also be used to hold other lighting equipment instead. You'll have plenty of room to take along enough lighting gear for a portrait session - all packed in an organized and accessible way. A touch fastened divider tray separates the stands, boom and umbrellas from the lights preventing them from bumping together and causing scratches or damage. For additional smaller equipment such as cables and small accessories, there are three interior 10.5 x 8.0" zippered mesh pockets.The bag is made from soft, padded water-resistant nylon and contains six movable touch fastened interior dividers (6 large, 2 small) that will permit you to configure the bag to accommodate the gear you need that day. The Light Kit Bag is carried by its two 2" wide overlapping top carry handles that can easily be extended into dual shoulder straps. The contents are accessed via dual zippers that when placed together will accept a user-supplied lock. For even more protection, the bottom of the bag contains three rubber feet for when the bag is placed on the ground. And the bag folds down to a quarter of its height for convenient storage and easy setup. Whether for storage or transport, the Impact Light Kit Bag will serve both pro or amateur well.
- The soft padded carry case is designed to hold three monolights with reflectors, four light stands, umbrellas, cables and other accessories
- The interior has six movable, touch fastened dividers that permit you to configure the bag to suit your needs; dividers consist of six large and two smaller styles
- 2" (5.1 cm) wide overlapping dual carry handles that convert to a shoulder strap
- Interior has three zippered 10.5 x 8.0" mesh pockets (26.7 x 20.3 cm)
- Touch fastened protective nylon tray separates light stands and umbrellas from monolights
- Water-resistant padded nylon construction
- Folds down to less then 4" for convenient storage and easy setup
- Dual zippered opening; accepts user-supplied lock
UPC: 847628030619 In the Box - 2 x Glamour Flash 300Ws Monolight wsxwbrevfeusbc
- Modeling Light (100W)
- Grid Reflector (7")
- Mini to PC Sync Cord
- Protective Cap
- User Manual
- Limited 1-Year Warranty
- Impact - Umbrella - White Translucent (43") wsxwbrevfeusbc
- Impact - Luxbanx Medium Rectangular Softbox (24 x 32")
- Speed Ring for Bowens S, Impact, Westcott, and Aputure
- 2 x Impact - Air-Cushioned Light Stand (Black, 8')
- Impact - Background Reflector for Impact/Bowens Mount Strobes
- Impact - Light Kit Bag #2 (34 x 13.5 x 12")
Table of Contents
|
Upload User Manual
Have you got an user manual for the Angler Two 300Ws Monolight Studio Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - 2 x Angler Glamour Flash 300Ws Monolight
| Maximum Power | 300 Ws | Power Control | 4 Stops in 1/10-Stop Increments | Guide Number | 180.4' / 55 m at 6.56' / 2 m, ISO100 with Reflector | Flash Duration | 1/1800 to 1/800 Sec | Recycle Time | 2 Sec (Full Power) | Color Temperature | 5600K ± 200K | Flash Ready Indicator | Audio, Visual | Reflector | Changeable | Accessory Fitting Type | Bowens S Type | | Type | Tungsten | Wattage | 100 W | Control Modes | Full On, Proportional | | Sync Type | Button, Cable, Optical | Sync Voltage | 4.3 V | | AC Input Voltage | 110to120 VAC, 60 Hz | Circuit Protection | Fuse | Fuse | 6 A | | Display | None | Mount | 5/8" / 16 mm Receptacle | Auto Dump | Yes | Fan Cooled | No | Dimensions | H: 8.4 x W: 6.1 x L: 11.6" / H: 21.3 x W: 15.5 x L: 29.5 cm, Including Reflector H: 8.4 x W: 5.2 x L: 11.6" / H: 21.3 x W: 13.2 x L: 29.5 cm, Including Cap | Weight | 3.5 lb / 1.58 kg | | Box Dimensions (LxWxH) | 21.5 x 10.5 x 6.5" | - Impact White Translucent Umbrella (43")
Size | 43.0" / 109.2 cm | Interior | White (Translucent) | Shaft Diameter | 8 mm | Folded Size | L: 28.3" / L: 71.8 cm | | Box Dimensions (LxWxH) | 29.0 x 2.7 x 1.65" | - Impact Luxbanx Medium Rectangular Softbox (24 x 32")
Shape | Rectangular | Interior | White | Requires Speed Ring | Yes, Not Included | Accepts Grids | Yes | Maximum Wattage | 250 W | Removable Front Face | Yes | Removable Interior Baffle | Yes | Rectangular Dimensions | W: 24.0 x H: 32.0 x D: 20.0" / W: 61.0 x H: 81.3 x D: 50.8 cm | Weight | 2 lb / 907 g | | Box Dimensions (LxWxH) | 26.0 x 11.0 x 1.0" | - Angler Speed Ring for Bowens S, Impact, Westcott, and Aputure
Compatible Lighting | Bowens S Mount | Compatible Softbox Shape | Strip | Number of Mounting Holes | 10 | Material | Aluminum | Weight | 1.1 lb / 0.5 kg | | Box Dimensions (LxWxH) | 8.0 x 7.85 x 2.35" | - 2 x Impact Air-Cushioned Light Stand (Black, 8')
Maximum Load | 8 lb (3.6 kg) | Leg Tip | 20 mm | Attachment Size | 5/8" Stud with 1/4"-20 in threaded tip | Accepts Wheels | Yes | Air Cushioned | Yes | Maximum Height | 96" (243.8 cm) | Minimum Height | 34" (86.3 cm) | Folded Height | 29.6 (75.2 cm) | Footprint Diameter | 36" (91.4 cm) | Weight | 2.05 lb (1 kg) | | Box Dimensions (LxWxH) | 29.75 x 3.2 x 3.15" | - Impact 7" Grid (40°)
| Box Dimensions (LxWxH) | 6.9 x 6.75 x 0.75" | - Impact Background Reflector for Impact/Bowens Mount Strobes
Interior | Silver | Accepts Grids | No | Requires Speed Ring / Adapter | No, Bowens S Mount Built In | Umbrella Mount | No | Material | Aluminum | Dimensions | H: 14 x " / H: 35.5 x cm | Weight | 0.8 lb / 0.4 kg | | Box Dimensions (LxWxH) | 16.25 x 8.85 x 8.75" | - Impact Light Kit Bag #2 (34 x 13.5 x 12")
| Interior Dimensions | 34 x 13.5 x 12" / 86.4 x 34.3 x 30.5 cm | | Closure Type | Zipper | Carry and Transport Options | 2 x Connecting Handstrap | Material of Construction | Nylon | Exterior Dimensions (W x H x D) | 34.5 x 14 x 13" / 87.6 x 35.6 x 33 cm | Weight | 5.8 lb / 2.6 kg | | Box Dimensions (LxWxH) | 35.0 x 14.0 x 12.5" |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 66 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Honeywell Home Doorbell 916.8 MHz Product Ref: 3231665-002 Rev B... Go Pro FETCH Dog Harness ADOGM-001... Trijacon ACOG USMC scope... Pyle Pro BTA 62BT 6-Zone Stereo Receiver Bluetooth... LG Gram 17 Laptop...
|
Discussion |
Latest contributions to the discussion:
lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland
... lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland... Settings access and setup Name: Edwin Derks Nuance PaperPort 14 I had a problem with Paperport loading. Through the remote efforts of a Tech was able to get back online, however, "settings" are only listed 1 - 5 with no action listed as was 'visibly' available, (i.e. Scan both sides, Black and White, Color, etc.)
1. how to change, 2. wha... query Name: Vudayagiri Balasubramanyam Bose Wave SoundTouch Music System IV how to set up my bose radio with my remote working-class ... Hi. I didn’t even get a chance to try it once! :( plz help Name: Eric Tasakovic Keeley Dark Side Pedal I ordered a dark side pedal second hand online for 20 bucks cheaper than it would have been to buy it new….20 measly bucks. Anyway…it didn’t come with a power supply. I messed up and accidentally plugged in a 9v ac output power supply in, instead of the required 9v dc. I’...
|
|