User Manual for APC Smart-UPS SRT3000XLW-IEC Battery Backup & Surge Protector Click to enlarge the picture
Contents of the user manual for the APC Smart-UPS SRT3000XLW-IEC Battery Backup &
- Product category: UPS Backup APC
- Brand: APC
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for APC UPS Backup
 |
User manual for the APC Smart-UPS SRT3000XLW-IEC Battery Backup & contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any APC product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official APC user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a APC product will considerably shorten its lifespan!
|
Product description The Smart-UPS SRT3000XLW-IEC Battery Backup & Surge Protector from APC is a high-performance, uninterruptible power supply (UPS) that helps to provide protection for electronic equipment in the event of utility power blackouts, brownouts, sags, surges, small utility power fluctuations, and large disturbances. It also provides battery backup power for connected equipment until utility power returns to acceptable levels or the batteries are completely discharged. The unit is controlled using a multi-function LCD status and control console.
Without any additional extended run options connected, the Smart-UPS SRT3000XLW-IEC can provide up to 72.9 minutes of runtime at 275W and up to 4 minutes of use when running a full load of 2700W. If you need longer runtimes, up to 10 external battery packs can be connected using two IEC jumpers, providing a maximum runtime of 2097.7 minutes at 275W, which decreases to 193.8 minutes when running a full load of 2700W.
APC's SRT3000XLW-IEC provides an output power capacity of 2700W / 3000VA, an output voltage of 208, 220, 230, or 240 VAC at 50/60 Hz ±3 Hz, six IEC 320 C13 battery backup outlets, two IEC 320 C19 battery backup outlets, an input voltage of 208, 220, 230, or 240 VAC at 40-70 Hz, and can accommodate British BS1363A, IEC-320 C20, and Schuko CEE 7/EU1-16P input connections using its three 8' power cords. It has a surge energy rating of 340 joules and its sealed lead-acid battery is maintenance-free, has suspended electrolytes, and can be recharged in around 3 hours. Included is a USB cable, a RS-232 signaling cable, and removable support feet. Protection is provided by a limited 3-year repair or replace warranty for the main unit and a limited 2-year battery warranty. General Features Availability - Intelligent Battery Management
- Helps maximize battery performance, life, and reliability through intelligent, precision charging.
- Automatic Internal Bypass
- Supplies utility power to the connected loads in the event of a UPS power overload or fault.
- Scalable Runtime
- Allows additional run time to be quickly added as needed.
- Temperature-Compensated Battery Charging
- Prolongs battery life by regulating the charge voltage according to battery temperature.
- Automatic Restart of Loads After UPS Shutdown
- Automatically starts up the connected equipment upon the return of utility power.
- Hot-Swappable Batteries
- Helps ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Adaptability - Flash Upgradable Firmware
- Install maintenance releases of firmware remotely using FTP.
- Plug-and-Play External Batteries
- Helps ensure clean, uninterrupted power to the loads when adding extra runtime to the UPS.
- Rack/Tower Convertible
- Helps protects the initial investment in the UPS when migrating from a tower to a rack environment.
Manageability - Serial Connectivity
- Provides management of the UPS via a serial port.
- LED Status Indicators
- Understand unit and power status with visual indicators.
- SmartSlot
- Customize UPS capabilities with management cards.
- InfraStruXure Manager Compatible
- Enables centralized management via the APC InfraStruXure Manager.
- Network Manageable
- Provides remote power management of the UPS over the network.
Protection - Frequency and Voltage Regulation
- Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
- Input Power Factor Correction
- Helps minimize installation costs by enabling the use of smaller generators and cabling.
- Power Conditioning
- Helps protect connected loads from surges, spikes, lightning, and other power disturbances.
- Safety-Agency Approved
- Helps ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Generator Compatible
- Helps ensure clean, uninterrupted power to protected equipment when generator power is used.
- Resettable Circuit Breaker
- Easy recovery from overloads; no need to replace a fuse.
- Cold-Start Capable
- Provides temporary battery power when the utility power is out.
- ECO Mode
- Operating mode that bypasses unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.
- Green Mode
- Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Serviceability - Audible Alarms
- Provides notification of changing utility power and UPS power conditions
- Automatic Self-Test
- Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- User-Replaceable Batteries
- Increases availability by allowing a trained user to perform upgrades and replacements of the batteries, thus reducing Mean Time to Repair (MTTR)
- Disconnected Battery Notification
- Warns when a battery is not available to provide backup power.
- Predictive Failure Notification
- Provides early-warning fault analysis, helping to ensure proactive component replacement.
UPC: 731304320081 In the Box APC Smart-UPS SRT3000XLW-IEC Battery Backup & Surge Protector Removable Support Feet RS-232 Cable USB Cable 3 x Power Cords Limited 2-Year Battery Warranty Limited 3-Year Warranty More from Manufacturer Table of Contents
|
Upload User Manual
Have you got an user manual for the APC Smart-UPS SRT3000XLW-IEC Battery Backup & Surge Protector in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAPC Smart-UPS SRT 3000VA Specs | | | Output Power Capacity | 2700 W / 3000 VA | | Max Configurable Power | 2700 W / 3000 VA | | Nominal Output Voltage | 208 & 230 V | | Output Voltage Note | Configurable for 220 or 240 V | | Output Voltage Distortion | Less than 2% | | Output Frequency (Sync to Mains) | 50/60 Hz ±3 Hz | | Load Crest Factor | 3:1 | | Topology | Double Conversion Online | | Waveform Type | Sine | | Output Connections | 6 x IEC 320 C13 (Battery Backup)
2 x IEC Jumpers (Battery Backup)
2 x IEC 320 C19 (Battery Backup) | | Bypass | Internal Bypass (Automatic and Manual) | | | | Nominal Input Voltage | 208 & 230 V | | Input Frequency | 40 - 70 Hz (auto sensing) | | Input Connections | British BS1363A, IEC-320 C20, and Schuko CEE 7/EU1-16P | | Cord Length | 8.0' / 2.4 m | | Input Voltage Range for Main Operations | 160 - 275 V | | Input Voltage Adjustable Range for Mains Operation | 100 - 275 V (half load) | | Other Input Voltages | 220 & 240 V | | | | Battery Type | Maintenance-free, leakproof, and sealed lead-acid battery with suspended electrolytes | | Included Battery Modules | 1 | | Typical Recharge Time | 3 hours | | Replacement Battery | APCRBC152 | | Expected Battery Life | 3 - 5 years | | RBC Quantity | 1 | | Extendable Run Time | 1 | | Extended Run Options | APC-Smart-UPS-SRT-3000VA-208-230V-IEC | | | | Interface Ports | RJ45 Serial, SmartSlot, and USB | | Control Panel | Multi-function LCD status and control console | | Audible Alarm | Audible and visible alarms prioritized by severity | | Emergency Power Off (EPO) | Yes | | | | Surge Energy Rating | 340 joules | | Filtering | None | | | | Operating Temperature | 32 to 104°F / 0 to 40°C | | Operating Relative Humidity | 0 to 95% (non-condensing) | | Operating Elevation | 0 to 9,843' / 0 to 3,000 m | | Storage Temperature | 5 to 113°F / -15 to 45°C | | Storage Relative Humidity | 0 to 95% (non-condensing) | | Storage Elevation | 0 to 49,213' / 0 to 15,000 m | | Audible Noise | 55 dBA (at 3.3' / 1.0 m from the surface of the unit) | | Online Thermal Dissipation | 703 BTU per hour | | Protection Class | IP 20 | | | | Approvals | CE, CE Mark, CSA C22.2 No.107.3-05, EAC, EN/IEC 62040-1, EN/IEC 62040-2, ENERGY STAR V1.0 (USA), ENERGY STAR V1.0 (EU), FCC Part 15 Class A, RCM, UL 1778, VDE | | | | RoHS | Compliant | | REACH | Contains no SVHCs | | Battery Directive | Compliant | | | | Color | Black | | Dimensions | 17.0 x 3.3 x 25.0" / 43.2 x 8.5 x 63.5 cm | | Weight | 69.0 lb / 31.3 kg | | | | Package Weight | 75.0 lb | | Box Dimensions (LxWxH) | 34.0 x 32.2 x 9.5" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 14 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
