User manual
ARRI DTS Set Dual 6G Complete

User Manual for ARRI DTS Set Dual 6G Complete

• Product category: Studio Systems ARRI
• Brand: ARRI
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for ARRI Studio Systems

Product description

• DTS 1820-12G FCA Fiber Camera Adapter (V-Mount) The DTS 1820-12G FCA Fiber Camera Adapter (V-Mount) from ARRI attaches to the back of your AMIRA camera, adding fiber connectivity to a multicam setup, supporting up to dual-link 3G 4K30p. Used as part of a fiber-remote system, the DTS 1820-12G enables live painting of multicam broadcasts and recordings. This adapter incorporates a Neutrik opticalCON DUO cable connector; the separately available DTS FCA LEMO assembly is recommended for outdoor multicamera setups. The dual-link 6G option may be purchased separately to enable external 4K UHD recording up to 60 fps, even if you're transmitting in a down-converted format. Pair this fiber adapter with the separately available Sony RCP (Remote Control Panel), a fiber base station, the FCA LEMO assembly, and your fiber optic cabling for full remote control of the AMIRA. Connectivity functions include a dual-channel stereo intercom, and SDI video out for monitoring. The DTS 1820-12G FCA features include automatic video-format switching, timecode input/output, genlock input, tally, and a V-mount battery plate. Note: The SMPTE-311 FCA LEMO assembly (K2.0014813) is not included.
  Features
  • • Adds multicamera connectivity to your ARRI AMIRA
    • Native support for up to dual-link 3G 4K30p
    • A separately available dual-link 6G option enables external 4K UHD recording up to 60 fps
    • Integrated Neutrik opticalCON DUO cable connection
    • A separately available LEMO connector assembly is recommended for outdoor use
    • Use with the Sony remote control panel for full camera control
    • Timecode in/out, and genlock input
    • Dual-channel stereo intercom, red and green tally, and V-mount battery compatibility
• DTS 1820 FCA LEMO Assembly Use the DTS 1820 FCA LEMO Assembly from ARRI to add SMPTE 311 optical-fiber connectivity to the DTS 1820 fiber back for the ARRI AMIRA camera. This multi-camera system component attaches to your fiber-optic cable run via a 4-pin LEMO connector.
• DTS FCA Cable Set for AMIRA Use the DTS FCA Cable Set for AMIRA from ARRI to connect the DTS 1820-12G FCA Fiber Camera Adapter to your ARRI AMIRA. This set includes one 12" RJ45 Ethernet, one 9" BNC-to-BNC, three 10" BNC-to-DIN, and one 20" BNC-to-DIN cables. The BNC cables feature 75Ω impedance for reliable signal conduction.
• DTS 1810-S12G FBS Fiber Base Station 12G The DTS 1810-S12G FBS Fiber Base Station 12G from ARRI provides power and inputs/outputs to the AMIRA camera via fiber cable. Connecting to the separately available FCA (fiber camera adapter), this base station supports up to 4K UHD video and is a component in live-painting multicamera broadcasts and recordings. This standard base is fitted with a Neutrik opticalCON DUO Connector; the separately available SMPTE 311 LEMO fiber assembly is recommended for outdoor multicamera setups. The front panel on the 1810-S12G FBS base station incorporates a status display, menu buttons, tally lights, and a two-channel intercom headset interface. Pair this fiber base with the separately available Sony RCP-1530/1501/1500 (Remote Control Panel), the FCA fiber camera adapter, the FBS LEMO assembly, and your fiber optic cabling for full remote control. This DTS1800 system is configured for use with the ARRI AMIRA or ALEX Mini. Select other cameras using traditional HD or UHD SDI output in 1.5/3/6G may also be supported; contact ARRI for the proper configuration. The compact, quarter-rack wide, 1 RU DTS 1810-S12G FBS unit may be rack-mounted or stand alone. Its display and navigation buttons rotate to accommodate horizontal or vertical use.
  Features
  • • Adds multicamera connectivity to your ARRI ALEXA Mini or AMIRA
    • For select other brands of UHD/HD SDI-Out cameras
    • Supports up to 12G 4K60p video
    • Integrated Neutrik opticalCON DUO cable connection
    • A separately available LEMO connector assembly is recommended for outdoor use
    • Use with the Sony remote control panel for full camera control
    • Timecode, genlock, RS-422 camera control, and LANC lens control
    • Dual-channel stereo intercom, and red and green tally
    • This compact, quarter-rack wide, 1 RU-sized unit may be used horizontally or vertically
• DTS 1810S FBS LEMO Assembly The DTS 1810S FBS LEMO Assembly from ARRI adds SMPTE 311 optical-fiber connectivity to the DTS fiber base for the ARRI AMIRA camera. This multi-camera system component receives your fiber-optic cable run via a 4-pin LEMO connector.
• DTS 1840A Ethernet Remote Interface ERI Use the DTS 1840A Ethernet Remote Interface ERI from ARRI as a hub linking a Sony RCP controller with your AMIRA camera via a DTS FBS (fiber base station). This multicam/remote component converts the Sony RS-422 Serial data into IP Ethernet data, translating the Sony protocol into ARRI control protocol. The DTS 1840A Interface also serves as a system hub, injecting a tally signal from a video switcher into the IP control data, thereby activating tally indicators on the AMIRA body and in the EVF.
  Features
  • • Enables Sony RCP control with your FBS-equipped ARRI AMIRA
    • Injects tally signal from a video switcher into the AMIRA control data
    • Multicam/remote control component
• DTS 1835B Dual Link 6G Video Input Option The DTS 1835B Dual Link 6G Video Input Option from ARRI enables your ARRI AMIRA's dual 6G-SDI outputs to be used for recording 4K video at rates up to 60p. This option board fits to the ARRI AMIRA DTS 1820-12G FCA (fiber connector adapter) and requires the use of AMIRA SUP 5.0 or later.
  Features
  • • Enables external 4K UHD recording up to 60 fps
    • Connects the AMIRA's dual 6G-SDI outputs directly to the DTS FCA (fiber connector adapter)
• DTS HR30 6-Pin to 5-Pin XLR Headset Adapter Cable Use the DTS HR30 6-Pin to 5-Pin XLR Headset Adapter Cable from ARRI to connect a standard, pro-style XLR headset to the DTS FCA (fiber camera adapter) used with the ARRI AMIRA. This cable includes a 6-pin Hirose connector at one end and a 5-pin XLR connector at the other.
• DTS 1810S Intercom Audio Cable Assembly The DTS 1810S Intercom Audio Cable Assembly from ARRI connects to the DTS FBS (fiber base station) used with the ARRI AMIRA. Use this multi-connector cable to convert the FBS' 15-pin D-sub port for use with a 3-pin XLR intercom system. This cable includes a 15-pin D-sub connector on one end, and both two 3-pin XLR female connectors and two 3-pin XLR male connectors on the other.

• DTS FBS Cable Set with ERI & 1810S Power Cables
• DTS 1804-400 PSU 400 Power Supply
• DTS Sony RCP to DTS1840 Cable
• DTS 2071A Tally Box with Cable
• DTS 1810-100 19" Base Shell (1 RU)
• DTS1840 ERI System Utility Tally Cable

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• Limited 1-Year Warranty

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• DTS 1820-12G FCA Fiber Camera Adapter (V-Mount)

  Connections

  Transport I/O: 1 x Neutrik opticalCON DUO Auxiliary: 1 x 10-pin Hirose RS-422/232 Remote: 1 x 12-pin Hirose Viewfinder: 12-pin Hirose Intercom I/O: 2 x 6-pin Hirose +13 V Power Out: 1 x 3-pin Hirose RS-485 Lens I/O: 1 x 6-pin Hirose Program Video In: 4 x DIN 1.0 HD-SDI I/O: 1 x DIN 1.0 HD-SDI Return: 1 x DIN 1.0 Composite Monitor In: 1 x BNC Genlock Out: 1 x BNC Timecode I/O: 1 x BNC Composite Return: 1 x BNC Ethernet: 1 x RJ45

  Power Input	Start: 30 +/- 5 VDC Run: 300 +/- 10 VDC External Power: 11 to 18 VDC
  Operating Temperature	14 to 104°F / -10 to 40°C
  Dimensions (HxWxD)	7.4 x 3.9 x 2" / 188 x 100 x 51 mm
  Weight	2.4 lb / 1.1 kg

• DTS 1820 FCA LEMO Assembly

  Connector	4-pin LEMO
  Standard	SMPTE 311
  Dimensions and Weight	Not specified by manufacturer

• DTS FCA Cable Set for AMIRA

  Impedance	75 Ω
  Cable Length	RJ45 to RJ45 Ethernet: 1 x 12" / 300 mm BNC to BNC: 1 x 9" / 230 mm BNC to DIN: 3 x 10" / 250 mm BNC to DIN: 1 x 20" / 500 mm
  Weight	Not specified by manufacturer

• DTS 1810-S12G FBS Fiber Base Station 12G

  Connections	Transport I/O: 1 x Neutrik opticalCON DUO Intercom I/O: 1 x 15-pin D-sub (female) Utility I/O: 1 x 15-pin D-sub (male) Analog Audio: 1 x 6-pin Hirose Ethernet: 1 x RJ45 Power In: 1 x Molex, 13.5 V Program Out: 4 x DIN 1.0 HD-SDI Out: 1 x DIN 1.0 HD-SDI In: 1 x DIN 1.0 Composite In: 1 x DIN 1.0 Composite Out: 1 x DIN 1.0

  Power	Input: 13 +/- 5 VDC Required Current: 12 A Power Input Fuse Rating: 15 A
  Operating Temperature	32 to 104°F / 0 to 40°C
  Rack Mount	1/4 RU
  Dimensions (DxWxH)	12.1 x 4.1 x 1.5" / 308 x 104 x 38.5 mm
  Weight	2.9 lb / 1.3 kg

• DTS 1810S FBS LEMO Assembly

  Connector	4-pin LEMO
  Standard	SMPTE 311
  Dimensions and Weight	Not specified by manufacturer

• DTS 1840A Ethernet Remote Interface ERI

  Dimensions and Weight

  Not specified by manufacturer

• DTS 1835B Dual Link 6G Video Input Option

  Firmware Requirement	AMIRA SUP 5.0 or later
  Dimensions and Weight	Not specified by manufacturer

• DTS HR30 6-Pin to 5-Pin XLR Headset Adapter Cable

  Connectors	6-pin Hirose 5-pin XLR
  Length	Not specified by manufacturer

• DTS 1810-100 19" Base Shell (1 RU)

  Accessory Type	Chassis

• DTS 1810S Intercom Audio Cable Assembly

  Connectors	1 x 15-pin D-sub 2 x 3-pin XLR female 2 x 3-pin XLR male
  Length	Not specified by manufacturer

• DTS FBS Cable Set with ERI & 1810S Power Cables
• DTS 1804-400 PSU 400 Power Supply
• DTS Sony RCP to DTS1840 Cable
• DTS 2071A Tally Box with Cable
• DTS1840 ERI System Utility Tally Cable

Rating

Discussion