|
User Manual for ARRI FF-5 Follow Focus Cine Set Pro Click to enlarge the picture
Contents of the user manual for the ARRI FF-5 Follow Focus Cine Set
- Product category: Follow Focus Systems ARRI
- Brand: ARRI
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for ARRI Follow Focus Systems
|
User manual for the ARRI FF-5 Follow Focus Cine Set contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any ARRI product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official ARRI user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a ARRI product will considerably shorten its lifespan!
|
Product description The ARRI FF-5 Cine Set Pro is a complete follow focus kit including a cine follow focus base, left- and right-sided standard focus knobs, two lens gears, one speed crank, one short whip, and 10 marking disks. Use the FF-5 Cine's integrated snap-on bridge mechanism to mount the follow focus to ARRI lightweight support rods. A bridgeplate adapter is required to use the FF-5 Cine with 15 or 19mm studio rod systems (not included). Having a gear ratio of 2:1, the FF-5 Cine is designed for cine-style lenses, with one turn of the focus knob resulting in two turns of the focus gear. This gear ratio suits the generously-spaced focus marks found on most cine lenses.
Both left- and right-sided standard focus knobs, suitable for cine-style lenses' hard focus marks, are included. The FF-5 Cine Set includes two 32-pitch, 0.8-mod drive gears: one 35-tooth gear, and one 43-tooth gear. The included focus whip and speed crank enable easier focus pulling for your assistant in specific situations. An extra-fine point marker can be used to transfer the focus marks of each of your most commonly used lenses to one of the flat marking disks, saving you the time of re-marking a disk each time you change lenses. - FF-5 Cine Follow Focus Base ARRI's FF-5 Cine Follow Focus Base is designed to snap onto a pair of 15 or 19mm lightweight rods. An adapter is required to use the FF-5 Cine with 15 or 19mm studio rod systems (not included). This base unit of the FF-5 does not come with any knobs or lens gears (available separately).The FF-5 Cine Base is designed for cine-style lenses. With a gear ratio of 2:1, one turn of the focus knob results in two turns of the focus gear. This gear ratio suits the generously-spaced focus marks found on most cine lenses.
- Designed for cine-style lenses and offering a gear ratio of 2:1, one turn of the focus knob results in two turns of the focus gear
- Base unit of the FF-5 follow focus system; requires knobs and gear (available separately)
- Snaps onto 15 or 19mm lightweight rods; separate adapter required for use with 15 or 19mm studio systems (not included)
- Standard Focus Knob (Left Side) The left-sided ARRI Standard Focus Knob fits ARRI FF-5 and MFF-2 Cine/HD, and FF-4 follow focus units. This standard, single-speed knob is designed to work with cine-style lenses having hard infinity and close focus limits. One reusable flat marking disk is included with the knob. Compatible ARRI focus accessories such as whips, speed cranks, and extensions are available separately.
- Single-speed focus knob for FF-5/FF-4/MFF-2 systems
- Standard left-sided focus knob
- For cine-style lenses with hard focus stops
- Compatible with all ARRI follow focus accessories like extensions, cranks, and whips
- Standard Focus Knob (Right Side) The right-sided ARRI Standard Focus Knob fits ARRI FF-5 and MFF-2 Cine/HD, and FF-4 follow focus units. This standard, single-speed knob is designed to work with cine-style lenses having hard infinity and close focus limits. One reusable flat marking disk is included with the knob. Compatible ARRI focus accessories such as whips, speed cranks, and extensions are available separately.
- Single-speed focus knob for FF-5/FF-4/MFF-2 systems
- Provides right-sided focus-pulling option
- For cine-style lenses with hard focus stops
- Compatible with all ARRI follow focus accessories like extensions, cranks, and whips
- Follow Focus Gear (0.8 Mod, 35 Teeth) This ARRI Follow Focus Gear can be used with all ARRI follow focus systems. The 35-tooth, 0.8 mod gear is designed for use with prime lenses and smaller zoom lenses that have 32 pitch gear rings. Its medium-width gear face measures 10mm.
- Follow focus gear meshes with a lens ring to enable focus adjustments
- 0.8 mod, 35-tooth, 32 pitch gear with a face width of 10mm
- For prime lenses and smaller zoom lenses with standard 32-pitch gear rings
- Follow Focus Gear (0.8 Mod, 43 Teeth) This ARRI Follow Focus Gear can be used with all ARRI follow focus systems. The 43-tooth, 0.8 mod gear is designed for use with larger prime lenses and 35mm format zoom lenses that have 32 pitch gear rings. Its gear face width measures a relatively slim 6mm.
- Follow focus gear meshes with a lens ring to enable focus adjustments
- 0.8 mod, 43-tooth, 32 pitch gear with a face width of 6mm
- For larger prime lenses and 35mm format zoom lenses with standard 32-pitch gear rings
- Follow Focus Speed Crank The ARRI Speed Crank fits into the socket of any ARRI follow focus knob. Designed for quick or extended focus pulls, this L-shaped handle enables a camera assistant to rotate the lens focus barrel further than possible when grasping the focus knob itself. The crank's round knob and right-angle configuration enable rotating the focus knob 360° or more, for those shots requiring extreme shifts in focus.
- Attaches to the socket on any ARRI follow focus knob
- Enables speedy or extended focus pulls with 360° or more of focus knob rotation
- L-shaped handle with knob head for comfortable handling
- Short Flexible Shaft for Follow Focus (12") The 12" ARRI Short Flexible Shaft is a whip that fits into the socket of any ARRI follow focus knob. With this whip, a camera assistant can pull focus from a distance, diminishing the chance of jostling the camera when doing handheld work or moving shots.
- Flat Marking Disk for WCU-3 & Standard/2-Speed FF Knob This ARRI Flat Marking Disk is compatible with standard and two-speed follow focus knobs, and the WCU-3 hand unit knob. Use a non-permanent marker to apply temporary focus marks to its surface. This round plastic unit may be used as a replacement or additional marking disk.
In the Box Bundle Items FF-5 Cine Follow Focus Base uqctdyufrcvbcczfewqfxfwved Standard Focus Knob (Left Side) - Flat Marking Disk for WCU-3 & Standard/2-Speed FF Knob
Standard Focus Knob (Right Side) - Flat Marking Disk for WCU-3 & Standard/2-Speed FF Knob
Follow Focus Gear (0.8 Mod, 35 Teeth) Follow Focus Gear (0.8 Mod, 43 Teeth) Follow Focus Speed Crank Short Flexible Shaft for Follow Focus (12") 10 x Flat Marking Disk for WCU-3 & Standard/2-Speed FF Knob Table of Contents
|
Upload User Manual
Have you got an user manual for the ARRI FF-5 Follow Focus Cine Set Pro in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - FF-5 Cine Follow Focus Base
| Dimensions (HxWxD) | 5.1 x 9.4 x 2.4" (13.0 x 24.0 x 6.0 cm) | | Weight | 14.3 oz (406 g) | - Standard Focus Knob (Left Side)
| Dimensions | 5.9 x 5.9 x 3.1" (150 x 150 x 80 mm) | | Weight | 6.4 oz (182 g) | | | | Box Dimensions (LxWxH) | 4.6 x 3.8 x 2.4" | - Standard Focus Knob (Right Side)
| Dimensions | 3.9 x 5.1 x 3.9" (100 x 130 x 100 mm) | | Weight | 7.8 oz (220 g) | | | | Box Dimensions (LxWxH) | 5.8 x 5.05 x 4.45" | - Follow Focus Gear (0.8 Mod, 35 Teeth)
| Number of Gear Teeth | 35 | | Face Width | 0.4" (10 mm) | | Dimensions | 1.2 x 1.2 x 0.6" (30 x 30 x 15 mm) | | Weight | 0.5 oz (13 g) | | | | Box Dimensions (LxWxH) | 4.0 x 2.5 x 0.7" | - Follow Focus Gear (0.8 Mod, 43 Teeth)
| Number of Gear Teeth | 43 | | Face Width | 0.2" (6 mm) | | Dimensions | Not specified by manufacturer | | Weight | 0.3 oz (8 g) | | | | Box Dimensions (LxWxH) | 2.8 x 1.2 x 0.7" | - Follow Focus Speed Crank
| Dimensions (WxHxD) | 2.2 x 4.3 x 0.8" (5.5 x 11.0 x 2.0 cm) | | Weight | 1.6 oz (44 g) | | | | Box Dimensions (LxWxH) | 5.0 x 4.0 x 1.0" | - Short Flexible Shaft for Follow Focus (12")
| Length | 13.8" (35.0 cm) | | Weight | 6.6 oz (186 g) | | | | Box Dimensions (LxWxH) | 14.0 x 7.0 x 0.6" | - Flat Marking Disk for WCU-3 & Standard/2-Speed FF Knob
| Dimensions | Not specified by manufacturer | | Weight | Not specified by manufacturer | | | | Box Dimensions (LxWxH) | 4.0 x 4.0 x 0.4" |
Rating50% users recommend this product to others. And what about you?
This product has already been rated by 30 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
I need a user manual and parts diagram for a Manfrotto Super Salon 280 Camera Stand - 9’
Thanks!...
OBIHI phone model number obi1032...
Instructions manual for a SONY woofer Model number: SA-W10...
I need the manual for a printer Brother MFC-J805DW. Reason is cause my printer is not recognizing the generic color cartridges LC3035...
I have a question, can you contact me at valenti-lanza@m.spheremail.net ? Cheers!...
|
| Discussion |
Latest contributions to the discussion:
Query
Name: Bruce Dunn
Avid Sibelius | Ultimate Standalone Perpetual
I seem to have lost the lower right hand icon that allows me to input notes, rests, voices etc. Can you tell me how to get it back?...
Difficult to remove the gooseneck mic. Help or advice needed.
Name: Joe Matos
Telex MCP90-18 - Panel Mount Gooseneck
Hi, I picked up an RTS KP-32 intercom and it has a gooseneck MCP90 mic installed, however I can't get it to come off. I read that it is reverse threaded 1/ 4" TRS, however when I tried by gripping it hard and turning clockwise, it still didn't come off. And turning counterc...
Question
Name: Dean Williams
Moultrie ATV Food Plot Spreader -
When spreading seed, does the gate automatically close when you turn the spreader off? Or do you have to close the gate via some other action?...
Video Promotion for your website?
Name: Joanna Riggs
Salamander Designs Keyboard Storage Shelf for
Hi,
I just visited search-manual.com and wondered if you'd ever thought about having an engaging video to explain or promote what you do?
Our prices start from just $195 USD.
Let me know if you're interested in seeing samples of our previous work.
Regards,
Joanna...
Need a REPAIR manual
Name: Dennis Behrends
Loctek Flexispot V9 Desk Exercise Bike
How do I get a REPAIR manual for a Loctek Flexispot V9 Desk Exercise Bike. I cannot get the petal crank off so I can remove the side panel. I have a crank removal tool but I'm afraid it will strip the threads because it is really stuck on there....
|
|
