User manual
ARRI H-2 Plus Hybrid AC Light

User Manual for ARRI H-2 Plus Hybrid AC Light Kit

• Product category: LED Lights ARRI
• Brand: ARRI
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for ARRI LED Lights

Product description

• LoCaster 2 Plus LED Panel with Stirrup Building on the foundation of the original LoCaster, ARRI's LoCaster 2 Plus LED Panel with Stirrup features 35% greater brightness, adjustable color temperature, light weight, full dimming and the AC and battery options sought after by location shooters. ARRI uses a 8.58 x 3.77 x 2.75", 35W LED array with a prismatic homogenizing lens to produce a 63-degree beam angle that performs like a single source luminaire without the multiple shadows that plague some other fixtures.The LoCaster 2 Plus offers a substantial amount of control as compared to other lights and adjustments are executed with simple knobs on its back panel. Color temperature is variable from 2800 to 6500K, and you can tweak the full minus and full plus green as well, taking care of most of your filtration preferences without taping a single gel to the unit. Dimming from 0-100% is just as easy using another knob. The LEDs are virtually heat-free, eliminating worries about the comfort of the talent, while the panel's rated 50,000 lamp life makes the LoCaster practically maintenance-free too.The LoCaster runs on a 100-250 VAC power supply for worldwide use or on a Caster battery pack when mains power is unavailable. The power supply, battery and charger are all purchased separately. The LoCaster 2 Plus comes with a stirrup that acts as a yoke, allows tilting adjustment, and has a built-in holder for the optional battery pack.
  Attributes and Benefits
  • More than 35% brighter than Caster 2 series
  • Optional 100-240 VAC power supply or battery pack
  • High intensity, low power consumption
  • Tunable white light from tungsten to daylight from 2800-6500K
  • CRI (Color Rendering Index) of 94 renders colors more vivid on film or digital media
  • Single source-type shadow rendering
  • Superior color temperature and intensity stability due to ARRI True Match LED Technology
  • 0-100% dimming as well as color temperature is controllable on the panel via simple knobs
  • Small size (8.58 x 3.77 x 2.75") and light weight (2.8 lb) make for easy portability and handling
  • Optional battery power
  Photometrics
  • At 3200K
    1035 lux / 96 fc at 3.3' (1.0 m)
    115 lux / 11 fc at 9.8' (3.0 m)
    41 lux / 4.0 fc at 16.4' (5.0 m)
    21 lux / 2.0 fc at 23' (7.0 m)
    At 5600K
    1044 lux / 97 fc at 3.3' (1.0 m)
    116 lux / 11 fc at 9.8' (3.0 m)
    42 lux / 4.0 fc at 16.4' (5.0 m)
    21 lux / 2.0 fc at 23' (7.0 m)
• 2-Leaf Barndoor Set for LoCaster/BroadCaster This is the ARRI 2-Leaf Barndoor Set for LoCaster/BroadCaster lights. These lights are part of the LED Caster Series and offer continuous dimming, choice of color temperature, and superior digital rendition. LoCaster is the on-location model while the BroadCaster, designed for more control, is the in-studio model.
• Gel Frame for LoCaster and BroadCaster The ARRI Gel Frame for LoCaster and BroadCaster allows use of cut-to-size filters with these LED fixtures. The frame is not inserted into the flute in the fixture's housing. It can only be used in combination with either the 2-leaf barndoor or the intensifier. It snaps into place in the space between the LED panel and either of these accessories.
• Power Supply for LoCaster (100-240V) The Arri LoCaster Power Supply accepts input voltages from 100-240VAC, 50/60Hz and outputs 24VDC, with a maximum of 2.5A. Extremely small and lightweight, it powers a single LoCaster panel via a 4-pin connection.
  • AC power supply accepts 100-240VAC input and powers a single LoCaster head.
  • Weighs only 0.6 lbs (0.3 kg) and is only 4.7" (12 cm) long.
• PowerDMX Extension Cable XLR 4-Pin for BroadCaster (10') This ARRI PowerDMX Extension Cable XLR 4-Pin for BroadCaster (10') allows remote control of the ARRI BroadCaster 50W dimmable LED light panel, including independent control of intensity, color temperature and +/- green attributes. This cable is 10' (3 m) long.
  • Designed for the ARRI BroadCaster LED Light Panel
• Baby Pin (5/8") with 3/8" Thread for LoCaster This Baby Pin (5/8") with 3/8" Thread for LoCaster is a 5/8" (16 mm) male stud adapter with 3/8" thread for using the LoCaster LED light with telescoping hangers.
• 150 Watt Fresnel Tungsten Light (220V) The Arri 150 Watt Fresnel is a small fresnel with great performance and location-tough construction. With a 2" (5.1cm) Fresnel lens and 50mm lens. Superior optical performance and Arri's cast and extruded aluminum housing make this the perfect small fresnel. This is a 220 Volt version of the Arri 150 light and it uses 220V lamps. All bulbs must be purchased separately.
  Lamp Specifications
  • This unit uses an A1248 lamp for 230 Volt AC current. Do not attempt to adapt this fixture for use with 110-120 voltage. The wiring is not designed for the higher amperage of lower voltage. For 110-120 AC Voltage, order: 530100bbdqcztszafdxu
  Mounting
  • Along with the other Arri Fresnels, the 150W will mount to all stands and mounting accessories with a 5/8" stud. All lamps must be purchased separately
  Optional Accessories
  • The use of a barndoor, scrim, snoot and filter frame add to the superb lighting quality produced by this light
• 4-Leaf Barndoor Set for ARRI 150W Fresnel The ARRI 4-Leaf Barndoor Set for the 150W Fresnel is used to control the shape of the light emitted from the fixture. It can be used to screen backgrounds, control reflections, or narrow the lighting angle of a particular reflector. ARRI barndoors are heat resistant.
• Filter Frame for 150 Watt Fresnel Arri Filter Frames are circular and heat resistant. Filters can be cut and sandwiched into them, and they slide into lamphead accessory holders. Sizes are a little bit larger than the fresnels.
• Full Single Scrim for 150W Fresnel (3") This is an ARRI Full Single Scrim that fits the 150W Fresnel or any fixture that accepts a 3" accessory. Scrims are metal screens mounted in a metal frame. They are placed in front of a light to reduce light intensity.
  
  ARRI makes four different types of scrims:
  • Full Single: This scrim covers the entire lightface and reduces the intensity of the entire light beam.
  • Full Double: This scrim covers the whole face of the light. It has two metal screens in it, reducing light intensity by two times the amount of the full single.
  • Half Single: This scrim only covers half of the lightface reducing half of the light intensity.
  • Half Double: This scrim is the same as the half single but reduces light intensity twice as much.
• Full Double Scrim for 150W Fresnel (3") This is an ARRI Full Double Scrim that fits the 150W Fresnel or any fixture that accepts a 3" accessory. Scrims are metal screens mounted in a metal frame. They are placed in front of a light to reduce light intensity.
  
  ARRI makes four different types of scrims:
  • Full Single: This scrim covers the entire lightface and reduces the intensity of the entire light beam.
  • Full Double: This scrim covers the whole face of the light. It has two metal screens in it, reducing light intensity by two times the amount of the full single.
  • Half Single: This scrim only covers half of the lightface reducing half of the light intensity.
  • Half Double: This scrim is the same as the half single but reduces light intensity twice as much.
  • Half scrims may be rotated in position for more precise control.
• A1248 Lamp for Arri 150W Fresnel (220V) This is a 150 watt, 230 volt bulb for the Arri 150 watt, 220 volt Fresnel fixture. If you are adapting a U.S.A., 120 volt Arri 150 for 220-240 volt use, this is not the bulb.
  Instead, order: GBJCV230200bbdqcztszafdxu. UPC: 043168884921
• Ceiling Scissor Clamp with 5/8" Stud This scissor clamp is for mounting small light fixtures from a drop ceiling frame. It features a standard 5/8" (baby) mounting stud.
• AS-01 Lightweight Light Stand 8.5' The 8.5' ARRI Lightweight Light Stand is designed to hold small light fixtures like the ARRI Fresnel 150. It packs easily for location work.
  • Three riser sections.

• LoCaster 2 Plus LED Panel

• Stirrup for LED BroadCaster/LoCaster/Battery

• Limited 1-Year Warranty

• 1 Year Manufacturer's Warranty

• 1 Year Manufacturer's Warranty

• 1-Year Limited Warranty

• 1 Year Manufacturer's Warranty

• Limited 1-Year Warranty

• One Year Manufacturer's Warranty

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• Limited 1-Year Warranty

Also Includes

• Hybrid Kit Case with Wheels

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• LoCaster 2 Plus LED Panel with Stirrup

  Optical System	Prismatic homogenizing lens
  Beam Angle	63º half peak angle
  Light Source	LED, 50,000 hour estimated lamp life
  Light Intensity	1000 cd
  Color Range	2800-6500K continuously variable CCT +/- 100K (nominal), +/- 1/8 Green-Magenta (nominal), continuously adjustable Estimated color shift over lifetime: < 200K
  CRI	94
  Power Requirements	100-250 VAC, 50/60 Hz 11-36 VDC
  Power Consumption	35 W
  Dimming	0-100% continuous
  Control	On-board
  Cable	4-pin XLR
  DMX	No
  Protection Class	III/IP 20
  Operating Temperature	-4 to +95ºF / 20 to +35ºC
  Mount	3/8" / 9.5 mm (female thread) Stirrup with 5/8" (16 mm) receiver and built-in battery pack holder
  Adjustments	+/- 30°
  Certifications	CE
  Dimensions	8.58 x 3.77 x 2.75" / 218 x 96 x 70 mm
  Weight	Without Stirrup: 2.1 lb / 0.9 kg With Stirrup: 2.8 lb / 1.2 kg

  Box Dimensions (LxWxH)	12.95 x 9.35 x 4.6"

• 2-Leaf Barndoor Set for LoCaster/BroadCaster

  Box Dimensions (LxWxH)	8.5 x 4.0 x 1.0"

• Gel Frame for LoCaster and BroadCaster

  Box Dimensions (LxWxH)	9.0 x 4.5 x 0.02"

• Power Supply for LoCaster (100-240V)

  AC Input Power	100 to 240 VAC, 50 / 60 Hz
  Power Draw	60.00 W

  Dimensions	4.7 x 2.1 x 1.4" / 12 x 5.5 x 3.5 cm
  Weight	0.7 lb / 0.3 kg

  Box Dimensions (LxWxH)	7.0 x 7.0 x 2.1"

• PowerDMX Extension Cable XLR 4-Pin for BroadCaster (10')

  Length

  10' (3 m)

  Box Dimensions (LxWxH)	6.1 x 3.3 x 1.2"

• Baby Pin (5/8") with 3/8" Thread for LoCaster

  Box Dimensions (LxWxH)	4.15 x 2.75 x 0.95"

• 150 Watt Fresnel Tungsten Light (220V)

  Rating	150W
  Socket (Lampholder)	GY9.5
  Lens (Condenser)	2" (50mm) low expansion borosillicate fresnel lens
  Reflector (Mirror)	Spherical specular high purity aluminum
  Mounting	5/8" (16mm) stand mount
  Yoke	Fits on standard 5/8" stand or mounting stud
  Cable	15' (4.6 m)
  Focusing	Worm gear driven
  Weight	2.3 lbs (1kg)
  Dimensions	5.25 x 7.75 x 6.1" (13.3 x 19.7 x 15.6cm)

  Box Dimensions (LxWxH)	11.0 x 6.9 x 5.9"

• 4-Leaf Barndoor Set for ARRI 150W Fresnel

  Box Dimensions (LxWxH)	15.25 x 12.35 x 2.5"

• Filter Frame for 150 Watt Fresnel

  Box Dimensions (LxWxH)	4.0 x 3.25 x 0.2"

• Full Single Scrim for 150W Fresnel (3")

  Box Dimensions (LxWxH)	4.35 x 4.05 x 0.15"

• Full Double Scrim for 150W Fresnel (3")

  Box Dimensions (LxWxH)	4.5 x 4.0 x 0.3"

• A1248 Lamp for Arri 150W Fresnel (220V)

  Base Type	GX6.35
  Wattage	150 W
  Voltage	230 V
  Color Temperature	3200K
  Average Life	50 Hours

  Box Dimensions (LxWxH)	4.9 x 1.8 x 1.6"

• Ceiling Scissor Clamp with 5/8" Stud

  Mounting

  5/8" / 16 mm Stud

  Box Dimensions (LxWxH)	4.15 x 4.0 x 1.2"

• AS-01 Lightweight Light Stand 8.5'

  Load Capacity	9 lb / 4.1 kg
  Mounting Options	5/8" Stud
  Maximum Working Height	8.5' / 2.6 m
  Minimum Working Height	2.2' / 0.1 m
  Collapsed Height	2.5' / 0.8 m
  Accepts Wheels	No
  Air Cushioned	No
  Detachable Base	No
  Leveling Leg	No
  Reverse Legs	No
  Finish	Black
  Weight	3.0 lb / 1.4 kg

  Box Dimensions (LxWxH)	30.709 x 3.937 x 3.858"

Rating

Discussion