|
User Manual for ARRI H-4 Plus Hybrid AC Light Kit Click to enlarge the picture
Contents of the user manual for the ARRI H-4 Plus Hybrid AC Light
- Product category: LED Lights ARRI
- Brand: ARRI
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for ARRI LED Lights
|
User manual for the ARRI H-4 Plus Hybrid AC Light contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any ARRI product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official ARRI user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a ARRI product will considerably shorten its lifespan!
|
Product description The 120 VAC version of the H-4 Plus Hybrid AC Light Kit from ARRI is a three-point lighting kit that includes one LoCaster 2 Plus LED Panel along with one 150W Tungsten Fresnel light and one 300W Tungsten Fresnel light. The combination of these three lights is well-suited to location lighting applications as well as studio conditions, and a host of accessories is also included for setting up the lights and controlling the light output.
Complementing the LoCaster 2 Plus fixture, this kit includes one stirrup for mounting and positioning the light, one two-leaf barndoor set, one 100-240 VAC power supply, one 10' long PowerDMX extension cable for remote dimming control, one 5/8" baby pin male stud adapter with 3/8" threads, and one filter frame. Benefiting the two tungsten Fresnel lights are two four-leaf barndoor sets, two filter frames, two full single and two full double scrims, 150W and 300W lamps, and two ceiling scissor clamps with 5/8" studs. Three 8.5' tall light stands are also included, as well as a hybrid kit case with wheels for storing the components during travel or storage. - LoCaster 2 Plus LED Panel with Stirrup Building on the foundation of the original LoCaster, ARRI's LoCaster 2 Plus LED Panel with Stirrup features 35% greater brightness, adjustable color temperature, light weight, full dimming and the AC and battery options sought after by location shooters. ARRI uses a 8.58 x 3.77 x 2.75", 35W LED array with a prismatic homogenizing lens to produce a 63-degree beam angle that performs like a single source luminaire without the multiple shadows that plague some other fixtures.The LoCaster 2 Plus offers a substantial amount of control as compared to other lights and adjustments are executed with simple knobs on its back panel. Color temperature is variable from 2800 to 6500K, and you can tweak the full minus and full plus green as well, taking care of most of your filtration preferences without taping a single gel to the unit. Dimming from 0-100% is just as easy using another knob. The LEDs are virtually heat-free, eliminating worries about the comfort of the talent, while the panel's rated 50,000 lamp life makes the LoCaster practically maintenance-free too.The LoCaster runs on a 100-250 VAC power supply for worldwide use or on a Caster battery pack when mains power is unavailable. The power supply, battery and charger are all purchased separately. The LoCaster 2 Plus comes with a stirrup that acts as a yoke, allows tilting adjustment, and has a built-in holder for the optional battery pack.
- Attributes and Benefits
-
- More than 35% brighter than Caster 2 series
- Optional 100-240 VAC power supply or battery pack
- High intensity, low power consumption
- Tunable white light from tungsten to daylight from 2800-6500K
- CRI (Color Rendering Index) of 94 renders colors more vivid on film or digital media
- Single source-type shadow rendering
- Superior color temperature and intensity stability due to ARRI True Match LED Technology
- 0-100% dimming as well as color temperature is controllable on the panel via simple knobs
- Small size (8.58 x 3.77 x 2.75") and light weight (2.8 lb) make for easy portability and handling
- Optional battery power
- Photometrics
- At 3200K
1035 lux / 96 fc at 3.3' (1.0 m)
115 lux / 11 fc at 9.8' (3.0 m)
41 lux / 4.0 fc at 16.4' (5.0 m)
21 lux / 2.0 fc at 23' (7.0 m)
At 5600K
1044 lux / 97 fc at 3.3' (1.0 m)
116 lux / 11 fc at 9.8' (3.0 m)
42 lux / 4.0 fc at 16.4' (5.0 m)
21 lux / 2.0 fc at 23' (7.0 m) - 2-Leaf Barndoor Set for LoCaster/BroadCaster This is the ARRI 2-Leaf Barndoor Set for LoCaster/BroadCaster lights. These lights are part of the LED Caster Series and offer continuous dimming, choice of color temperature, and superior digital rendition. LoCaster is the on-location model while the BroadCaster, designed for more control, is the in-studio model.
- Gel Frame for LoCaster and BroadCaster The ARRI Gel Frame for LoCaster and BroadCaster allows use of cut-to-size filters with these LED fixtures. The frame is not inserted into the flute in the fixture's housing. It can only be used in combination with either the 2-leaf barndoor or the intensifier. It snaps into place in the space between the LED panel and either of these accessories.
- Power Supply for LoCaster (100-240V) The Arri LoCaster Power Supply accepts input voltages from 100-240VAC, 50/60Hz and outputs 24VDC, with a maximum of 2.5A. Extremely small and lightweight, it powers a single LoCaster panel via a 4-pin connection.
- AC power supply accepts 100-240VAC input and powers a single LoCaster head.
- Weighs only 0.6 lbs (0.3 kg) and is only 4.7" (12 cm) long.
- PowerDMX Extension Cable XLR 4-Pin for BroadCaster (10') This ARRI PowerDMX Extension Cable XLR 4-Pin for BroadCaster (10') allows remote control of the ARRI BroadCaster 50W dimmable LED light panel, including independent control of intensity, color temperature and +/- green attributes. This cable is 10' (3 m) long.
- Designed for the ARRI BroadCaster LED Light Panel
- Baby Pin (5/8") with 3/8" Thread for LoCaster This Baby Pin (5/8") with 3/8" Thread for LoCaster is a 5/8" (16 mm) male stud adapter with 3/8" thread for using the LoCaster LED light with telescoping hangers.
- 150-Watt Tungsten Fresnel Light (120 VAC) The ARRI 150-Watt Fresnel is a compact light source with location-tough construction and a 2" (50mm) Fresnel lens. Superior optical performance and ARRI's cast and extruded aluminum housing make this the perfect small Fresnel. All lamps must be purchased separately.This fixture is equipped for 120 VAC operation. It will also function with 230 VAC provided that the 120V lamp carriage is replaced by a 230V carriage and the plug is adapted to your socket configuration.
- Small Size
- Studio ready and location tough
- Superior optical performance
- Has a 2" (50mm) Fresnel lens
- Lamp versatility
- Uses 100, 150 or 200W lamps
- 4-Leaf Barndoor Set for ARRI 150W Fresnel The ARRI 4-Leaf Barndoor Set for the 150W Fresnel is used to control the shape of the light emitted from the fixture. It can be used to screen backgrounds, control reflections, or narrow the lighting angle of a particular reflector. ARRI barndoors are heat resistant.
- Filter Frame for 150 Watt Fresnel Arri Filter Frames are circular and heat resistant. Filters can be cut and sandwiched into them, and they slide into lamphead accessory holders. Sizes are a little bit larger than the fresnels.
- Full Single Scrim for 150W Fresnel (3") This is an ARRI Full Single Scrim that fits the 150W Fresnel or any fixture that accepts a 3" accessory. Scrims are metal screens mounted in a metal frame. They are placed in front of a light to reduce light intensity.
ARRI makes four different types of scrims: - Full Single: This scrim covers the entire lightface and reduces the intensity of the entire light beam.
- Full Double: This scrim covers the whole face of the light. It has two metal screens in it, reducing light intensity by two times the amount of the full single.
- Half Single: This scrim only covers half of the lightface reducing half of the light intensity.
- Half Double: This scrim is the same as the half single but reduces light intensity twice as much.
- Full Double Scrim for 150W Fresnel (3") This is an ARRI Full Double Scrim that fits the 150W Fresnel or any fixture that accepts a 3" accessory. Scrims are metal screens mounted in a metal frame. They are placed in front of a light to reduce light intensity.
ARRI makes four different types of scrims: - Full Single: This scrim covers the entire lightface and reduces the intensity of the entire light beam.
- Full Double: This scrim covers the whole face of the light. It has two metal screens in it, reducing light intensity by two times the amount of the full single.
- Half Single: This scrim only covers half of the lightface reducing half of the light intensity.
- Half Double: This scrim is the same as the half single but reduces light intensity twice as much.
- Half scrims may be rotated in position for more precise control.
- ESP Lamp (150W/120V) This ARRI ESP Lamp (150W/120V) is compatible with ARRI's 150W Fresnel. It has a clear finish and a bayonet base.
- 300 Plus Tungsten Fresnel (Silver/Blue) The Silver/Blue 300 Plus Fresnel from ARRI is a 4 lb, 9.17 x 8.7 x 6.3", 300 W fixture with a versatile 3" Fresnel lens. With a spot-to-flood range of 15° to 49°, it allows you to pinpoint hard light on your subject or wash it in a soft, wide field of light with a simple twist of a knob. Separate purchase of a 4-way barndoor permits further control of the beam, allowing you to direct the light where you want it and keep it from areas that you don't. The 300 Plus Fresnel accepts optional 120-240 VAC lamps such as the FSL or FKW that are 0-100% adjustable with an external dimmer and ready for worldwide use. The 300 Plus Fresnel's yoke has an integrated 5/8" receiver for mounting on stands or accessories with a 5/8" stud or spigot.
- Benefits
-
- High quality lenses and reflectors for excellent optical performance
- Compact size and lightweight
- Robust construction of rust-resistant, extruded, die cast aluminum
- Easy and convenient operation
- Quick and easy service access
- Extensive range of accessories
- 4-Leaf Barndoor Set for 300W Fresnel, 125W HMI, 200W Pocket PAR The ARRI 4-Leaf Barndoor Set for the 300W Fresnel, 125W HMI Fresnel, and 200W Pocket-Lite and Pocket PAR is used to control the shape of the light emitted from the fixture. It can be used to screen backgrounds, control reflections, or narrow the lighting angle of a particular reflector. ARRI barndoors are heat resistant.
- Filter Frame for Plus 300, HMI 125W Fresnels Arri Filter Frames are circular and heat resistant. Filters can be cut and sandwiched into them, and they slide into lamphead accessory holders. Sizes are a little bit larger than the fresnels.
- Full Single Scrim for Arrilite 600, 300W Fresnel, 125W HMI Fresnel (5") This is an ARRI Full Single Scrim that fits the Arrilite 600, 300W, 125W Fresnel, or any fixture that accepts a 5" accessory. Scrims are metal screens mounted in a metal frame. They are placed in front of a light to reduce light intensity.
ARRI makes four different types of scrims: - Full Single: This scrim covers the entire lightface and reduces the intensity of the entire light beam.
- Full Double: This scrim covers the whole face of the light. It has two metal screens in it, reducing light intensity by two times the amount of the full single.
- Half Single: This scrim only covers half of the lightface reducing half of the light intensity.
- Half Double: This scrim is the same as the half single but reduces light intensity twice as much.
- Full Double Scrim for Arrilite 600, Fresnel 300W, 125W (5") This is an ARRI Full Double Scrim that fits the Arrilite 600, 300W, and 125W Fresnels or any fixture that accepts a 5" accessory. Scrims are metal screens mounted in a metal frame. They are placed in front of a light to reduce light intensity.
ARRI makes four different types of scrims:- Full Single: This scrim covers the entire lightface and reduces the intensity of the entire light beam.
- Full Double: This scrim covers the whole face of the light. It has two metal screens in it, reducing light intensity by two times the amount of the full single.
- Half Single: This scrim only covers half of the lightface reducing half of the light intensity.
- Half Double: This scrim is the same as the half single but reduces light intensity twice as much.
- Half scrims may be rotated in position for more precise control.
- Ceiling Scissor Clamp with 5/8" Stud This scissor clamp is for mounting small light fixtures from a drop ceiling frame. It features a standard 5/8" (baby) mounting stud.
- AS-01 Lightweight Light Stand 8.5' The 8.5' ARRI Lightweight Light Stand is designed to hold small light fixtures like the ARRI Fresnel 150. It packs easily for location work.
In the Box Bundle Items LoCaster 2 Plus LED Panel with Stirrup aduezzueucadwcvfyycqswuezttuxxbz - LoCaster 2 Plus LED Panel
- Stirrup for LED BroadCaster/LoCaster/Battery
2-Leaf Barndoor Set for LoCaster/BroadCaster Gel Frame for LoCaster and BroadCaster - 1 Year Manufacturer's Warranty
Power Supply for LoCaster (100-240V) - 1 Year Manufacturer's Warranty
PowerDMX Extension Cable XLR 4-Pin for BroadCaster (10') Baby Pin (5/8") with 3/8" Thread for LoCaster 150-Watt Tungsten Fresnel Light (120 VAC) 4-Leaf Barndoor Set for ARRI 150W Fresnel Filter Frame for 150 Watt Fresnel - One Year Manufacturer's Warranty
Full Single Scrim for 150W Fresnel (3") Full Double Scrim for 150W Fresnel (3") ESP Lamp (150W/120V) 300 Plus Tungsten Fresnel (Silver/Blue) aduezzueucadwcvfyycqswuezttuxxbz 4-Leaf Barndoor Set for 300W Fresnel, 125W HMI, 200W Pocket PAR Filter Frame for Plus 300, HMI 125W Fresnels aduezzueucadwcvfyycqswuezttuxxbz - One Year Manufacturer's Warranty
Full Single Scrim for Arrilite 600, 300W Fresnel, 125W HMI Fresnel (5") Full Double Scrim for Arrilite 600, Fresnel 300W, 125W (5") 2 x Ceiling Scissor Clamp with 5/8" Stud 3 x AS-01 Lightweight Light Stand 8.5'
Also Includes - 300W Lamp (120V)
- Hybrid Kit Case with Wheels
Table of Contents
|
Upload User Manual
Have you got an user manual for the ARRI H-4 Plus Hybrid AC Light Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - LoCaster 2 Plus LED Panel with Stirrup
| Optical System | Prismatic homogenizing lens | | Beam Angle | 63º half peak angle | | Light Source | LED, 50,000 hour estimated lamp life | | Light Intensity | 1000 cd | | Color Range | 2800-6500K continuously variable CCT
+/- 100K (nominal), +/- 1/8 Green-Magenta (nominal), continuously adjustable
Estimated color shift over lifetime: < 200K | | CRI | 94 | | Power Requirements | 100-250 VAC, 50/60 Hz
11-36 VDC | | Power Consumption | 35 W | | Dimming | 0-100% continuous | | Control | On-board | | Cable | 4-pin XLR | | DMX | No | | Protection Class | III/IP 20 | | Operating Temperature | -4 to +95ºF / 20 to +35ºC | | Mount | 3/8" / 9.5 mm (female thread)
Stirrup with 5/8" (16 mm) receiver and built-in battery pack holder | | Adjustments | +/- 30° | | Certifications | CE | | Dimensions | 8.58 x 3.77 x 2.75" / 218 x 96 x 70 mm | | Weight | Without Stirrup: 2.1 lb / 0.9 kg
With Stirrup: 2.8 lb / 1.2 kg | | | | Box Dimensions (LxWxH) | 12.95 x 9.35 x 4.6" | - 2-Leaf Barndoor Set for LoCaster/BroadCaster
| | | Box Dimensions (LxWxH) | 8.5 x 4.0 x 1.0" | - Gel Frame for LoCaster and BroadCaster
| | | Box Dimensions (LxWxH) | 9.0 x 4.5 x 0.02" | - Power Supply for LoCaster (100-240V)
| | | AC Input Power | 100 to 240 VAC, 50 / 60 Hz | | Power Draw | 60.00 W | | | | Dimensions | 4.7 x 2.1 x 1.4" / 12 x 5.5 x 3.5 cm | | Weight | 0.7 lb / 0.3 kg | | | | Box Dimensions (LxWxH) | 7.0 x 7.0 x 2.1" | - PowerDMX Extension Cable XLR 4-Pin for BroadCaster (10')
| | | Box Dimensions (LxWxH) | 6.1 x 3.3 x 1.2" | - Baby Pin (5/8") with 3/8" Thread for LoCaster
| | | Box Dimensions (LxWxH) | 4.15 x 2.75 x 0.95" | - 150-Watt Tungsten Fresnel Light (120 VAC)
| | | Beam Angle | 12 to 42° | | Color Temperature | 3200K | | Bulb Type | 1 x BA15d | | Max Bulb Wattage | 150 W | | Lens Type | Fresnel | | Lens Diameter | 2" / 50 mm | | Built-In Dimmer | None | | Focusable | Yes | | Front Accessory Mount | 3" (Scrim) | | Umbrella Mount | None | | | | AC Input Power | 120 VAC, 60 Hz | | Mounting | 5/8" Receiver (via Included Yoke Mount) | | Cable Length | 15' / 4.6 m | | Inline Switch | Yes | | Certifications | CB, CE, GS, NRTL, as per Manufacturer | | IP Rating | IP20 | | Material | Aluminum (Housing) | | Dimensions | 5.25 x 7.75 x 6.1" / 13.3 x 19.7 x 15.6 cm | | Weight | 2.3 lb / 1 kg | | | | Box Dimensions (LxWxH) | 11.1 x 7.1 x 5.7" | - 4-Leaf Barndoor Set for ARRI 150W Fresnel
| | | Box Dimensions (LxWxH) | 15.25 x 12.35 x 2.5" | - Filter Frame for 150 Watt Fresnel
| | | Box Dimensions (LxWxH) | 4.0 x 3.25 x 0.2" | - Full Single Scrim for 150W Fresnel (3")
| | | Box Dimensions (LxWxH) | 4.35 x 4.05 x 0.15" | - Full Double Scrim for 150W Fresnel (3")
| | | Box Dimensions (LxWxH) | 4.5 x 4.0 x 0.3" | - ESP Lamp (150W/120V)
| Base Type | BA15d | | Filament Type | CC-8 | | ANSI Code | ESP | | Wattage | 150 W | | Voltage | 120 V | | Lumens | 2800 | | Color Temperature | 2900K | | Average Life | 2000 Hours | | Maximum Overall Length (MOL) | 2.44" / 62 mm | | | | Box Dimensions (LxWxH) | 3.2 x 1.6 x 1.6" | - 300 Plus Tungsten Fresnel (Silver/Blue)
| | | Beam Angle | 14 to 53° | | Color Temperature | 3200K | | Bulb Type | 1 x GY9.5 | | Max Bulb Wattage | 300 W | | Lens Type | Fresnel | | Lens Diameter | 3.15" / 80 mm | | Built-In Dimmer | None | | Focusable | Yes | | Front Accessory Mount | 5" (Scrim) | | Umbrella Mount | None | | | | AC Input Power | 120 to 240 VAC, 50 / 60 Hz | | Mounting | 5/8" Receiver (via Included Yoke Mount) | | Cable Length | 11.5' / 3.5 m | | Inline Switch | Yes | | Certifications | CB, CE, GS, NRTL, as per Manufacturer | | IP Rating | IP20 | | Material | Aluminum (Housing) | | Dimensions | 9.17 x 8.7 x 6.3" / 233 x 187 x 160 mm | | Weight | 4 lb / 1.8 kg | | | | Box Dimensions (LxWxH) | 10.6 x 9.5 x 8.0" | - 4-Leaf Barndoor Set for 300W Fresnel, 125W HMI, 200W Pocket PAR
| | | Box Dimensions (LxWxH) | 7.95 x 6.3 x 1.9" | - Filter Frame for Plus 300, HMI 125W Fresnels
| | | Box Dimensions (LxWxH) | 5.7 x 5.45 x 0.25" | - Full Single Scrim for Arrilite 600, 300W Fresnel, 125W HMI Fresnel (5")
| | | Box Dimensions (LxWxH) | 5.0 x 5.0 x 0.2" | - Full Double Scrim for Arrilite 600, Fresnel 300W, 125W (5")
| | | Box Dimensions (LxWxH) | 5.2 x 5.1 x 0.2" | - Ceiling Scissor Clamp with 5/8" Stud
| Mounting | 5/8" / 16 mm Stud | | | | Box Dimensions (LxWxH) | 4.15 x 4.0 x 1.2" | - AS-01 Lightweight Light Stand 8.5'
| Load Capacity | 9 lb / 4.1 kg | | Mounting Options | 5/8" Stud | | Maximum Working Height | 8.5' / 2.6 m | | Minimum Working Height | 2.2' / 0.1 m | | Collapsed Height | 2.5' / 0.8 m | | Accepts Wheels | No | | Air Cushioned | No | | Detachable Base | No | | Leveling Leg | No | | Reverse Legs | No | | Finish | Black | | Weight | 3.0 lb / 1.4 kg | | | | Box Dimensions (LxWxH) | 30.709 x 3.937 x 3.858" |
Rating60% users recommend this product to others. And what about you?
This product has already been rated by 69 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Milano Carbon Fiber Tripod with B1 Head...
c.PLASMA X LARGE SIN/SION user manual-pdf
centrotherm PECVD platform c.PLASMA...
Streamlight Macrostream...
AOC curved gaming monitor...
User manual for Bowens ML500 Flash head ...
|
| Discussion |
Latest contributions to the discussion:
SQ 7 PDF
Name: Yash Deshmukh
Allen & Heath SQ-7 48-Channel 36-Bus
I want to download PDF ...
Business Card Studio 10
Name: Yvon
Summitsoft Business Card Studio Pro
Business Card Studio 10 will not print. Window 11
My printer will print anything else....
REQUESTING FOR QUOTE
Name: ALBERT GABRIEL
Auray X-Style Piano Bench & Double
RFQ 919
S/ N DESCRIPTION UNIT QTY
1 KEYBOARD
YAMAHA MODEL
PSR-S750 61-KEY
DIGITAL
WORKSTATION PCS 1
2 AURAY DOUBLE-X
KEYBOARD
STAND WITH
PULL LOCK MFR
#KSPL-2X PCS 1
3 YAMAHA YBA-611
ARTISTE SERIES
KEYBOARD BAG
FOR 61-KEY
PORTABLE
KEYBOARDS PCS 1
4 AURAY FP-P1...
Leatherman Micra
Name: Rebecca Burgess
Leatherman Micra Tool with Box
Please send me a user's manual for Leatherman Micra...
total cost of Casio CTK 3500 61 key manual
Name: Eric Sensiba
Casio CTK-3500 61-Key Keyboard with Touch
What is the total cost for a Casio CTK 3500 61 key Electronic keyboard manual including taxes and shipping t85739?...
|
|
