|
User Manual for ARRI LMB 6x6 Pro 19mm Studio Set Click to enlarge the picture
Contents of the user manual for the ARRI LMB 6x6 Pro 19mm Studio
- Product category: Matte Boxes & Sunshades ARRI
- Brand: ARRI
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for ARRI Matte Boxes & Sunshades
|
User manual for the ARRI LMB 6x6 Pro 19mm Studio contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any ARRI product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official ARRI user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a ARRI product will considerably shorten its lifespan!
|
Product description The LMB 6x6 Pro 19mm Studio Set from ARRI includes a wide array of modular LMB 6x6 matte box components. This most complete of several sets offered by ARRI includes stationary two- and single-filter stages, and one single-filter rotating stage. The LMB 6x6 may be mounted on 19mm studio rods or clamped onto lenses with 80-156mm outside diameters using the included Tilt and Flex Adapter. It is also compatible with separately available clamp adapters to fit various lens diameters.Light-deflecting components include one top/bottom flag, two side flags, a pair of flag holders, and sets of both spherical and anamorphic formatted mattes. A combo swing-away/tilt arm module facilitates quick lens changes by providing access to the lens port without having to slide the matte box off its supporting rods. The tilt function supports filters at a 10° angle, eliminating or reducing unwanted reflections such as car headlights, etc. Use the sliding LMB accessory adapter to attach a 3/8"-16-mountable item such as a focus rangefinder to the matte box. - LMB 6x6 Basic Module The ARRI LMB 6x6 Basic Module is the core of the highly modular, lightweight LMB 6x6 matte box system. This module includes two 6.6 x 6.6" filter trays, a sunshade, a backplate with filter guides, two top flag holders, and a #0 matte.The included #0 matte can be quickly snapped into the sunshade to protect your lens from dirt and dust while repositioning your camera or during a break in filming. This module features tray catchers for precisely holding the frames in place.This adaptable LMB 6x6 Basic Module can be used with separately available lens clamp-on rings or mounted using 15 or 19mm rod supports. Components like a Swing-Away Tilt Module, top flag, mattes, and extra filter stages are available separately, enabling you to configure the system in as minimal or complete a configuration as needed. The LMB 6x6 Basic Module comes packed in a foam insert made to fit into a Pelican Case 1637.
Features - Includes two 6.6 x 6.6" filter frames
- Tray catchers hold the filter frames precisely in place
- The included matte can be quickly snapped onto the matte box to protect your lens
- Mounts via separately available lens adapter clamps or 15mm/19mm rod support
- Configure as needed with separately available components
- Includes a foam insert to hold the matte box components in a Pelican 1637 case
- LMB 6x6 Swing-Away Tilt Mod. 19mm Studio The ARRI LMB 6x6 Swing-Away Tilt Mod. 19mm Studio enables you to extend the LMB 6x6 matte box away from your lens with a simple twist, saving time when changing or cleaning your lens.This bracket also provides up to 10° of tilt for angling your filter to reduce or eliminate unwanted reflections. The LMB 6x6 Swing-Away Tilt Mod. is compatible with the 19mm studio rod standard.
Features -
- For the ARRI LMB 6x6 lightweight matte box
- Enables matte box to swing away for quicker lens changes
- Tilts filters up to 10° to reduce unwanted reflections
- 19mm studio rod standard
- LMB 19mm Studio Rod Adapter The ARRI LMB Studio Rod Adapter adds 19mm studio rod support to one of several components used with the LMB 4x5 or LMB 6x6 matte box. This adapter features thumb-lever rod locks and a toolless, screw-in design for quick mounting.
Compatibility - LMB 4x5 15mm Lightweight Console
- LMB 4x5 swing Away Tilt Module
- LMB 6x6 Clamp Adapter 143mm
- LMB 6x6 Clamp Adapter 156mm
- LMB 6x6 Tilt and Flex Adapter
- LMB 6x6 Tilt and Flex Adapter 80-156mm ARRI's LMB 6x6 Tilt and Flex Adapter 80-156mm can be used to bridge any gap between extending front elements on your lens and an LMB 6x6 matte box. This adapter is compatible with lenses incorporating a front outer diameter between 80 and 156mm.The Tilt and Flex Adapter will also compensate for the tilting angle created when using a Swing-Away Tilt Module with the LMB 6x6 matte box. An interface at the bottom of the adapter can accommodate either the LMB 15mm or LMB 19mm Studio Rod Adapter.
Features - Fits lenses with diameters between 80 and 156mm
- Bridges gap created by a lens with extending front elements or by a Swing-Away Tilt Module
- Integrated rod interface for 15 or 19mm rods
- LMB 6x6 Extra Rotatable Filter Stage The ARRI LMB 6x6 Extra Rotatable Filter Stage enables you to rotate a single 6.6 x 6.6" filter frame 360°. Use this LMB 6x6 stage by itself as an ultralight filtering option for gimbal, stabilizer, or drone use, or add it to a two-filter stage to hold a third filter.This rotating filter stage incorporates tray catchers for precisely securing a filter frame, and it can mount the LMB 6x6 sunshade directly onto its front. No tools are needed for mounting; the stage is attached using two integrated thumbscrews.
Features - Use to rotate a filter up to 360°
- Holds one 6.6 x 6.6" filter frame
- Offers single-filter mounting for gimbal, stabilizer, or drone use
- Designed for ARRI LMB 6x6 lightweight matte box
- Can directly support the LMB 6x6 sunshade
- LMB 6x6 Extra Non-Rotatable Filter Stage The ARRI LMB 6x6 Extra Non-Rotatable Filter Stage holds one 6.6 x 6.6" filter frame. Use this LMB 6x6 stage by itself as an ultralight filtering option for gimbal, stabilizer, or drone use, or add it to a two-filter stage to hold a third filter. This filter stage incorporates tray catchers for precisely securing a filter frame, and it can mount the LMB 6x6 sunshade directly onto its front. No tools are needed for mounting; the stage is attached using two integrated thumbscrews.
Features - Holds one 6.6 x 6.6" filter frame
- Offers single-filter mounting for gimbal, stabilizer, or drone use
- Designed for ARRI LMB 6x6 lightweight matte box
- Can directly support the LMB 6x6 sunshade
- LMB 6x6 Top, Bottom Flag Compatible with the LMB 6x6 lightweight matte box, the ARRI LMB 6x6 Top, Bottom Flag provides flare control for your lens, preventing a loss in image quality caused by stray light.The lightweight flag incorporates two extendable wings and can be used at the top or bottom of the matte box. This flag can also be used to physically protect the front of the lens when moving your camera rig between shots or during a break in recording.
Features - Can be attached to the top or bottom of the LMB 6x6 matte box
- Two built-in wings for extended flare control
- Carbon fiber construction
- Can be used to shield the lens front between shots or during breaks
- LMB 6x6 Side Flags These ARRI LMB 6x6 Side Flags are used to provide additional flare control on an LMB 6x6 matte box. Each of these lightweight carbon fiber flags feature an extendable panel for precise shading control.Both flags and the separately available Top/Bottom Flag can be folded flat on the matte box, saving time when building and disassembling your camera rig.
Features - Left and right side flags for an LMB 6x6 matte box
- Built-in extension panels for blocking the maximum amount of light
- Carbon fiber construction is suitable for handheld, drone, stabilizer, and other lightweight rigs
- Flags can remain attached to the matte box for storage, saving setup time
- LMB Flag Holders This pair of ARRI LMB Flag Holders is compatible with the LMB 4x5 and 6x6 lightweight matte boxes. The holders can be attached to the top, bottom, or sides of your matte box.Each holder screws into the matte box and has a captive knurled knob to hold the flag in place.
Features -
- Compatible with ARRI LMB 4x5 and 6x6 lightweight matte boxes
- Mounts on top, bottom, or sides of your matte box
- Captive knurled knob holds the flag in place
- LMB Accessory Adapter The ARRI LMB Accessory Adapter is used to mount one 3/8"-16 accessory to an ARRI LMB 4x5, LMB 6x6, LMB-25, or LMB-6 matte box. This T-shaped adapter features a sliding 3/8"-16 shoe that enables you to position a rangefinder or other device for optimal line-of-sight use.
Features -
- Compatible with ARRI LMB 4x5, LMB 6x6, LMB-25, and LMB-6 lightweight matte boxes
- Use to mount one 3/8"-16 accessory like an ultrasonic rangefinder
- Threaded shoe slides for optimal positioning
- LMB 6x6 Set of Mattes Spherical The ARRI LMB 6x6 Set of Mattes Spherical includes five hard mattes for use with the LMB 6x6 lightweight matte box. Each matte has a different spherical aspect ratio opening and snaps into place on the matte box sunshade.Use these mattes for additional blocking of stray light that may cross the edges of your matte box.
Features - Each matte snaps into place on the sunshade of the ARRI LMB 6x6 matte box
- For use with spherical lenses
- Five mattes cover different focal length ranges
- LMB 6x6 Set of Mattes Anamorphic The ARRI LMB 6x6 Set of Mattes Anamorphic includes five hard mattes for use with the LMB 6x6 lightweight matte box. Each matte has a different anamorphic aspect ratio opening and snaps into place on the matte box sunshade.Use these mattes for additional blocking of stray light that may cross the edges of your matte box.
Features - Each matte snaps into place on the sunshade of the ARRI LMB 6x6 matte box
- For use with anamorphic lenses
- Five mattes cover different focal length ranges
In the Box Bundle Items LMB 6x6 Basic Module tucxyqsdevvbtvtr - Backplate with Filter Guides
- 2 x 6.6 x 6.6" Filter Frame
- Foam Insert for Pelican Case 1637
LMB 6x6 Swing-Away Tilt Mod. 19mm Studio tucxyqsdevvbtvtr LMB 19mm Studio Rod Adapter LMB 6x6 Tilt and Flex Adapter 80-156mm LMB 6x6 Extra Rotatable Filter Stage LMB 6x6 Extra Non-Rotatable Filter Stage LMB 6x6 Top, Bottom Flag LMB 6x6 Side Flags LMB Flag Holders LMB Accessory Adapter LMB 6x6 Set of Mattes Spherical LMB 6x6 Set of Mattes Anamorphic Table of Contents
|
Upload User Manual
Have you got an user manual for the ARRI LMB 6x6 Pro 19mm Studio Set in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - LMB 6x6 Basic Module
| Filter Size | 6.6 x 6.6" | | Filter Stages | 2 | | Dimensions (WxHxD) | 11.8 x 9.1 x 2.8" / 300 x 230 x 70 mm | | Weight | 1.4 lb / 0.6 kg | - LMB 6x6 Swing-Away Tilt Mod. 19mm Studio
| Rod Standard | 19 mm Studio | | Tilt Adjustment | 10° Up/Down | | Dimensions | 9.4 x 8.7" / 240 x 220 mm | | Weight | 12.7 oz / 360 g | - LMB 19mm Studio Rod Adapter
| Rod Standard | 19 mm Studio | | Dimensions | 5.9 x 2 x 1.6" / 150 x 50 x 40 mm | | Weight | 3.7 oz / 106 g | | | | Box Dimensions (LxWxH) | 6.7 x 5.95 x 1.5" | - LMB 6x6 Tilt and Flex Adapter 80-156mm
| Material of Construction | Rubber
Aluminum | | Lens Diameter | 80 to <156mm | | Dimensions | 7.9 x 7.9 x 2.8" / 200 x 200 x 70 mm | | Weight | 7.5 oz / 213 g | - LMB 6x6 Extra Rotatable Filter Stage
| Rotation | 360° | | Dimensions (WxHxD) | 8.7 x 8.7 x 1.6" / 220 x 220 x 40 mm | | Weight | 14 oz / 394 g | - LMB 6x6 Extra Non-Rotatable Filter Stage
| Dimensions (WxHxD) | 8.7 x 8.7 x 1.2" / 220 x 220 x 30 mm | | Weight | 6.3 oz / 178 g | - LMB 6x6 Top, Bottom Flag
| Dimensions (HxWxD) | 11.8 x 10.6 x 1.2" / 300 x 270 x 30 mm | | Weight | 2.1 oz / 61 g | - LMB 6x6 Side Flags
| Material of Construction | Carbon Fiber | | Dimensions and Weight | Not Specified by Manufacturer | | | | Box Dimensions (LxWxH) | 17.25 x 9.85 x 1.95" | - LMB Flag Holders
| Dimensions and Weight | Not Specified by Manufacturer | | | | Box Dimensions (LxWxH) | 6.0 x 6.0 x 1.5" | - LMB Accessory Adapter
| Dimensions (WxHxD) | 7.9 x 2.8 x 1.6" / 200 x 70 x 40 mm | | Weight | 2.5 oz / 72 g | | | | Box Dimensions (LxWxH) | 9.1 x 2.6 x 1.0" | - LMB 6x6 Set of Mattes Spherical
| Dimensions (WxHxD) | 11.8 x 8.3 x 0.4" / 300 x 210 x 10 mm | | Total Weight | 12.3 oz / 348 g | | | | Box Dimensions (LxWxH) | 19.2 x 11.4 x 8.8" | - LMB 6x6 Set of Mattes Anamorphic
| Dimensions (WxHxD) | 11.8 x 8.3 x 0.4" / 300 x 210 x 10 mm | | Total Weight | 1 lb / 461 g | | | | Box Dimensions (LxWxH) | 15.2 x 12.2 x 0.85" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 35 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Milano Carbon Fiber Tripod with B1 Head...
c.PLASMA X LARGE SIN/SION user manual-pdf
centrotherm PECVD platform c.PLASMA...
Streamlight Macrostream...
AOC curved gaming monitor...
User manual for Bowens ML500 Flash head ...
|
| Discussion |
Latest contributions to the discussion:
SQ 7 PDF
Name: Yash Deshmukh
Allen & Heath SQ-7 48-Channel 36-Bus
I want to download PDF ...
Business Card Studio 10
Name: Yvon
Summitsoft Business Card Studio Pro
Business Card Studio 10 will not print. Window 11
My printer will print anything else....
REQUESTING FOR QUOTE
Name: ALBERT GABRIEL
Auray X-Style Piano Bench & Double
RFQ 919
S/ N DESCRIPTION UNIT QTY
1 KEYBOARD
YAMAHA MODEL
PSR-S750 61-KEY
DIGITAL
WORKSTATION PCS 1
2 AURAY DOUBLE-X
KEYBOARD
STAND WITH
PULL LOCK MFR
#KSPL-2X PCS 1
3 YAMAHA YBA-611
ARTISTE SERIES
KEYBOARD BAG
FOR 61-KEY
PORTABLE
KEYBOARDS PCS 1
4 AURAY FP-P1...
Leatherman Micra
Name: Rebecca Burgess
Leatherman Micra Tool with Box
Please send me a user's manual for Leatherman Micra...
total cost of Casio CTK 3500 61 key manual
Name: Eric Sensiba
Casio CTK-3500 61-Key Keyboard with Touch
What is the total cost for a Casio CTK 3500 61 key Electronic keyboard manual including taxes and shipping t85739?...
|
|
