|
User Manual for ARRI LoCaster 2 Plus LED Panel AC DC Single Kit Click to enlarge the picture
Contents of the user manual for the ARRI LoCaster 2 Plus LED Panel
- Product category: LED Lights ARRI
- Brand: ARRI
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for ARRI LED Lights
|
User manual for the ARRI LoCaster 2 Plus LED Panel contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any ARRI product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official ARRI user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a ARRI product will considerably shorten its lifespan!
|
Product description The ARRI LoCaster 2 Plus LED Panel AC/DC Single Kit is a great choice for location lighting. It includes one 35W LED designed for TV broadcast and film location work that weighs in at only 2.0 lb (0.96 kg) and offers a color temperature range from 2800°K to 6500°K, so it's easy to closely match existing light set-ups as well as various ambient light situations. And it is continuously dimmable, so you won't be wasting time repositioning the LoCasters or messing with ND gels. The optical design guarantees sharp, single shadow rendering that can be cleanly cut with a barndoor or flag, color stability, consistent output, and a CRI (Color Rendering Index) of 94. Besides the 11-36 VDC LoCaster with stirrup, one 100 - 240 VAC power supply and one LoCaster Battery Pack and Charges are included to cover all power scenarios. A barndoor set, one 5/8" baby pins with 3/8" thread and a carrying case are also included.For complete specs on the items included in this kit please click on the links below:LoCaster 2 Plus LED Panel with Stirrup
Two Leaf Barndoor
LoCaster Single Power Supply
LoCaster Battery Pack with Charger
Baby Pin with 3/8" Thread
Kit Case - LoCaster 2 Plus LED Panel with Stirrup Building on the foundation of the original LoCaster, ARRI's LoCaster 2 Plus LED Panel with Stirrup features 35% greater brightness, adjustable color temperature, light weight, full dimming and the AC and battery options sought after by location shooters. ARRI uses a 8.58 x 3.77 x 2.75", 35W LED array with a prismatic homogenizing lens to produce a 63-degree beam angle that performs like a single source luminaire without the multiple shadows that plague some other fixtures.The LoCaster 2 Plus offers a substantial amount of control as compared to other lights and adjustments are executed with simple knobs on its back panel. Color temperature is variable from 2800 to 6500K, and you can tweak the full minus and full plus green as well, taking care of most of your filtration preferences without taping a single gel to the unit. Dimming from 0-100% is just as easy using another knob. The LEDs are virtually heat-free, eliminating worries about the comfort of the talent, while the panel's rated 50,000 lamp life makes the LoCaster practically maintenance-free too.The LoCaster runs on a 100-250 VAC power supply for worldwide use or on a Caster battery pack when mains power is unavailable. The power supply, battery and charger are all purchased separately. The LoCaster 2 Plus comes with a stirrup that acts as a yoke, allows tilting adjustment, and has a built-in holder for the optional battery pack.
- Attributes and Benefits
-
- More than 35% brighter than Caster 2 series
- Optional 100-240 VAC power supply or battery pack
- High intensity, low power consumption
- Tunable white light from tungsten to daylight from 2800-6500K
- CRI (Color Rendering Index) of 94 renders colors more vivid on film or digital media
- Single source-type shadow rendering
- Superior color temperature and intensity stability due to ARRI True Match LED Technology
- 0-100% dimming as well as color temperature is controllable on the panel via simple knobs
- Small size (8.58 x 3.77 x 2.75") and light weight (2.8 lb) make for easy portability and handling
- Optional battery power
- Photometrics
- At 3200K
1035 lux / 96 fc at 3.3' (1.0 m)
115 lux / 11 fc at 9.8' (3.0 m)
41 lux / 4.0 fc at 16.4' (5.0 m)
21 lux / 2.0 fc at 23' (7.0 m)
At 5600K
1044 lux / 97 fc at 3.3' (1.0 m)
116 lux / 11 fc at 9.8' (3.0 m)
42 lux / 4.0 fc at 16.4' (5.0 m)
21 lux / 2.0 fc at 23' (7.0 m) - 2-Leaf Barndoor Set for LoCaster/BroadCaster This is the ARRI 2-Leaf Barndoor Set for LoCaster/BroadCaster lights. These lights are part of the LED Caster Series and offer continuous dimming, choice of color temperature, and superior digital rendition. LoCaster is the on-location model while the BroadCaster, designed for more control, is the in-studio model.
- Power Supply for LoCaster (100-240V) The Arri LoCaster Power Supply accepts input voltages from 100-240VAC, 50/60Hz and outputs 24VDC, with a maximum of 2.5A. Extremely small and lightweight, it powers a single LoCaster panel via a 4-pin connection.
- AC power supply accepts 100-240VAC input and powers a single LoCaster head.
- Weighs only 0.6 lbs (0.3 kg) and is only 4.7" (12 cm) long.
- LoCaster Battery w/Charger (30 VDC) The ARRI LoCaster Battery w/Charger (30 VDC) is a dedicated battery that can power a Locaster single LED panel for approximately 1.6 hours. The battery has a built-in capacity status check button to monitor the remaining running time available.
- Battery powers a LoCaster single LED panel for approximately 1.6 hours
- Mounts onboard in stirrup
- Built-in capacity status check button to monitor remaining run time
- Weighs just 2.6 lb (1.17 kg)
- Baby Pin (5/8") with 3/8" Thread for LoCaster This Baby Pin (5/8") with 3/8" Thread for LoCaster is a 5/8" (16 mm) male stud adapter with 3/8" thread for using the LoCaster LED light with telescoping hangers.
- Case for LoCaster LED Panel This is the Arri Case for LoCaster LED Panel. It is fabricated from black, high-impact ABS plastic. The SKB-style case features metal reinforcement and molded foam interior in a briefcase design. The case as shipped will hold a LoCaster panel, Power Supply, Stirrup and up to 4 batteries. In situations where impact protection is not an issue, a block of foam may be removed from the case making room for 2 Locaster panels, 2 Power Supplies, 2 Stirrups and 4 batteries. UPC: 789270171152
In the Box Bundle Items LoCaster 2 Plus LED Panel with Stirrup vdevybatctduzwdydf - LoCaster 2 Plus LED Panel
- Stirrup for LED BroadCaster/LoCaster/Battery
2-Leaf Barndoor Set for LoCaster/BroadCaster Power Supply for LoCaster (100-240V) - 1 Year Manufacturer's Warranty
LoCaster Battery w/Charger (30 VDC) Baby Pin (5/8") with 3/8" Thread for LoCaster Case for LoCaster LED Panel
Also Includes User Guide PDF 752.3kb Table of Contents
|
Upload User Manual
Have you got an user manual for the ARRI LoCaster 2 Plus LED Panel AC DC Single Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - LoCaster 2 Plus LED Panel with Stirrup
| Optical System | Prismatic homogenizing lens | | Beam Angle | 63º half peak angle | | Light Source | LED, 50,000 hour estimated lamp life | | Light Intensity | 1000 cd | | Color Range | 2800-6500K continuously variable CCT
+/- 100K (nominal), +/- 1/8 Green-Magenta (nominal), continuously adjustable
Estimated color shift over lifetime: < 200K | | CRI | 94 | | Power Requirements | 100-250 VAC, 50/60 Hz
11-36 VDC | | Power Consumption | 35 W | | Dimming | 0-100% continuous | | Control | On-board | | Cable | 4-pin XLR | | DMX | No | | Protection Class | III/IP 20 | | Operating Temperature | -4 to +95ºF / 20 to +35ºC | | Mount | 3/8" / 9.5 mm (female thread)
Stirrup with 5/8" (16 mm) receiver and built-in battery pack holder | | Adjustments | +/- 30° | | Certifications | CE | | Dimensions | 8.58 x 3.77 x 2.75" / 218 x 96 x 70 mm | | Weight | Without Stirrup: 2.1 lb / 0.9 kg
With Stirrup: 2.8 lb / 1.2 kg | | | | Box Dimensions (LxWxH) | 12.95 x 9.35 x 4.6" | - 2-Leaf Barndoor Set for LoCaster/BroadCaster
| | | Box Dimensions (LxWxH) | 8.5 x 4.0 x 1.0" | - Power Supply for LoCaster (100-240V)
| | | AC Input Power | 100 to 240 VAC, 50 / 60 Hz | | Power Draw | 60.00 W | | | | Dimensions | 4.7 x 2.1 x 1.4" / 12 x 5.5 x 3.5 cm | | Weight | 0.7 lb / 0.3 kg | | | | Box Dimensions (LxWxH) | 7.0 x 7.0 x 2.1" | - LoCaster Battery w/Charger (30 VDC)
| Input Voltage | Charger: 100-240 VAC | | Output | Charger: 30 VDC
Battery: 30 VDC | | Capacity | Battery: 81 Wh | | Dimensions | Battery: 5.1 x 3.9 x 2.1" (13 x 10 x 5.5 cm)
Charger: 5.5 x 3.9 x 1.5" (14 x 10 x 4 cm) | | Weight | Battery: 2.64 lb (1.2 kg)
Charger: 0.77 lb (350 g) | | | | Box Dimensions (LxWxH) | 8.3 x 6.4 x 4.6" | - Baby Pin (5/8") with 3/8" Thread for LoCaster
| | | Box Dimensions (LxWxH) | 4.15 x 2.75 x 0.95" | - Case for LoCaster LED Panel
| | | Exterior Dimensions (W x H x D) | 24 x 24 x 7" / 61 x 61 x 17.8 cm | | | | Box Dimensions (LxWxH) | 19.0 x 15.0 x 7.5" |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 88 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
NEWER F100 CAMERA MONITOR...
PhotoStage progessional...
powerpint...
Night Detective Quest 5M 5x Night Vision Monocular ...
Ibanez AM93QM User Manual....
|
| Discussion |
Latest contributions to the discussion:
TR-P5TP pink robot dog
Name: Allyson
Top Race Race & Remote Control
Hello we are having issues with the remote to the robot dog it just flashes a red light will not sync to the robot dog what so ever the dog is charged and batteries have been changed out more the once, Can i get help trouble shooting the issue or if something needs to be sent bac...
Query
Name: Libba Guyton
Canon Pixma TS9520 Wireless All-In-One Printer
Support Code 1851
Multi purpose tray guide is open. Close the guide and press OK.
Done and the same message continue to appear....
Manual
Name: Grant
Konus KonuStart-700B 60mm f 11.6 Refractor
Please send user manual for Konustart-700B to above email address....
Fs3x manual
Name: Randy Reid
DigiTech FS3X Three-Function Foot Switch
I need manual
...
adding additional chime
Name: Stan Stansfield
OhmKat Video Doorbell Power Supply for
The additional chime does not work and is closure to the transmitter then the first one. I plugged in the additional chime and set the volume and chime. The original chime works when the additional chime is plugged in to new location. The original chime is located further away bu...
|
|
