|
User Manual for Arturia Art of Brute Bundle with MiniBrute 2S, RackBrute 6U, and BruteBag Click to enlarge the picture
Contents of the user manual for the Arturia Art of Brute Bundle with
- Product category: Synthesizer Keyboards Arturia
- Brand: Arturia
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Arturia Synthesizer Keyboards
|
User manual for the Arturia Art of Brute Bundle with contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Arturia product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Arturia user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Arturia product will considerably shorten its lifespan!
|
Product description The Arturia Art of Brute Bundle combines the MiniBrute 2S with a RackBrute 6U and a BruteBag travel case to create a complete analog and Eurorack synthesizer ecosystem with protection from on-the-road wear and tear. - MiniBrute 2S Semi-Modular Analog Synthesizer/Sequencer with 48-Point Patchbay Building upon the success of the original Minibrute, the Arturia MiniBrute 2S is a semi-modular monophonic analog synthesizer with a 48-point patchbay and full Eurorack compatibility. The 2S replaces the keyboard with 16 pressure and velocity sensitive pads and adds an advanced 3-track sequencer borrowed from Arturia's KeyStep controller. Additional updates include a second VCO, a second LFO, and VCO and filter frequency modulation possibilities, as well as modifier-related modulation destinations and a loopable AD envelope.
The MiniBrute 2S features a 100% analog signal path and a familiar voice architecture with two independent VCOs. VCO 1 allows for waveform mixing and includes level faders for sawtooth, square, and triangle waveforms, as well as white noise and an external audio input. VCO 2 also includes a level fader and offers a selector with sine, sawtooth, and square wave selections, a tuning knob, and three range selections including Fine, All, and LFO.
Like the original, the MiniBrute 2S includes the classic Steiner-Parker multi-mode filter with LP, BP, HP, and notch selections, as well as the Brute Factor overdrive. There are dedicated knobs for frequency modulation of the filter and resonance modulation via LFO1 by default. Two envelope generators are included and feature a classic ADSR and an AD with multiple modes allowing for a wide variety of sonic possibilities including looping. No synthesizer would be complete without an LFO and the MiniBrute 2S offers two with six waveform selections and the ability to run free or sync to the on-board arpeggiator/loop.
The 3-track, 64-step sequencer offers up to 64 sequence memories. Sequencer 1 controls pitch, gate, velocity and pressure, while Sequencer 2 or 3 can generate other types of signals, such as gates, CV, pitch, LFOs, Envelopes. Real-time and step editing are available. All sequence patterns can be saved and recalled on-the-fly.
With its user-friendly control interface, classic aesthetic, and potential for endless exploration and tonal tinkering, the MiniBrute 2s definitely encourages creativity. Experiment with rewiring the instrument's internal architecture or further expand and explore its sonic capabilities by interfacing with Eurorack modules. The rugged aluminum enclosure features wooden sides for vintage synthesizer appeal and is also compatible with the RackBrute link system, allowing for Arturia's 3 RU or 6 RU Eurorack enclosure to be connected for creating a customized setup with a variety of positions. The Arturia MiniBrute 2S ships with a power supply, eight patch cables, and a cookbook with recipes for creating a wide variety of tones and patches. -
- Analog Synthesizer
- 2 x Analog VCO
- VCO1 : Saw + UltraSaw, Square + Pulse width, Triangle + Metalizer (waveform mixing)
- VCO2 : Sine, Saw, Square waveforms (three tuning ranges)
- VCO 2>1 Hard Sync, VCO1 linear and exponential FM
- White noise generator
- External audio in
- Steiner-Parker filter (12dB per octave): Notch, Low-, High-, Band-pass
- 2 x LFO with Sync: Sine, Tri, Saw, Square, Random, Slew Random
- 1 x ADSR envelope
- 1 x AD envelope
- Trig, gate modes
- One shot or loop
- Attack and decay times CV controllable
- 48-point CV and Gate Patchbay
- Inputs and outputs for the voice and sequencer
- Utility Modules: Inverter, attenuators, VCA
- 16 x velocity and pressure sensitive pads
- 16 x encoders
- 64 x sequence memories
- Sequence pitch, gate, velocity, and pressure on up to 64 steps
- Sequence modulations such as Gates, LFOs, AD Envelopes, and more
- Real-time or step recording modes
- Arpeggiator/Looper
- Save and recall sequence patterns on the fly
- MIDI and USB I/O
- Includes 8 x patch cables
- Cook Book: Jam-packed full of sonic recipes put together by some of the most illustrious synth-chefs around
- RackBrute 6U Eurorack Case with Integrated Link System (176 HP) The 6 RU, Arturia RackBrute 6U is an adjustable 176 HP Eurorack housing system that will store, protect, and power Eurorack modules. The rugged aluminum case is strong, yet lightweight, and features nut strip rails for easy installation of your Eurorack modules. The RackBrute ships with a 5 HP power module pre-installed, which connects to the nose filtered internal bus board for connecting up to 32 modules. The RackBrute Link System allows you to combine units that are Link-enabled such as the MiniBrute 2 and 2S and/or additional RackBrute enclosures.
When transporting, the case features integrated spacers to help stabilize the RackBrute and any Link-enabled enclosure. The RackBrute 6U ships with a power supply, power cord, Link Fixing System (handle and 4 screws), and an extra set of screws, washers, and rubber pads. -
- Eurorack format, 176 HP
- Aluminum chassis
- Provided with a 5 HP power module
- Power rail with noise filtering and 32 standard power slots
- Link system and smart handle to fasten a MiniBrute 2/2S or another RackBrute unit in various configurations
- Built-in spacers for the highest protection in transport configuration
- RackBrute Travel Bag for RackBrute and MiniBrute 2 EcoSystems Transport your synthesizer in style with the Arturia RackBrute Travel Bag, which offers protection to your RackBrute and/or MiniBrute 2 synthesizers from on-the-road wear and tear. Once the rack is folded into transport mode, the unit fits snugly into the high-quality padded bag. Additionally, there is an external compartment for adapters and small controllers. A fully-loaded modular synthesizer can get heavy, so Arturia included a hard-wearing shoulder strap to make transport a little easier.
-
- Full Ecosystem: Designed for musicians traveling with the RackBrute and MiniBrute 2
- The Brute Guardian: With its reinforced packaging, solid zipper material, and smart ergonomics, the Travel Bag brings safety to your gear in different environments
In the Box Bundle Items MiniBrute 2S Semi-Modular Analog Synthesizer/Sequencer with 48-Point Patchbay bfvdyxytfuddverftudwazbwce RackBrute 6U Eurorack Case with Integrated Link System (176 HP) bfvdyxytfuddverftudwazbwce - Link Fixing System (Handle + 4 Screws)
- Set of Extra Screws and Washers + Rubber Pads
RackBrute Travel Bag for RackBrute and MiniBrute 2 EcoSystems bfvdyxytfuddverftudwazbwce Table of Contents
|
Upload User Manual
Have you got an user manual for the Arturia Art of Brute Bundle with MiniBrute 2S, RackBrute 6U, and BruteBag in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - MiniBrute 2S Semi-Modular Analog Synthesizer/Sequencer with 48-Point Patchbay
Synthesizer Type | Monophonic | Analog Audio Signal Path | 100% | Multimode Filter | Steiner-Parker 12 dB per Octave (2-Pole): Low-pass, band-pass, high-pass, notch Filter Controls: Cutoff Resonance Mode FM (controls the amplitude and polarity of the envelope signal sent to modulate the filter cutoff frequency) Resonance Modulation (RM): Modulates the level of resonance at the cutoff frequency, pre-wired to LFO1 with bipolar control ATT 1 > Cutoff: Attenuator 1 provides another way of modulating the filter cutoff frequency, pre-wired between pressure-sensitivity and the filter cutoff. | Oscillators | VCO1: Saw + UltraSaw, Square +Pulse width, Triangle + Metalizer (Waveform mixing) VCO2: Sine, Saw, Square waveforms VCO2 Tuning Range: Fine, All, LFO | Oscillator Mixer | Yes (Sawtooth, Square, Triangle, White Noise, External Audio In, Osc 2) | Signal Enhancers | VCO 1 Controls Fine Tune (controls pitch over 1 octave - does not affect VCO 2) Glide (portamento) Pulse Width (alters width of square wave) Metalizer (bringing extreme triangle harmonics) Frequency Modulation (FM) (default VCO 2 modulates VCO 1) Ultrasaw Amount (generating shimmering sawtooth waveforms) PWM (Pulse Width Modulation) (default LFO modulates Pulse Width) Metal Mod (default velocity controls Metal amount) | LFO | LFO 1&2 Waveforms: Sine, Tri, Saw, Square, Random, Slew Random Clock syncable to sequencer / arpeggiator | Envelope Generators | ADSR (Attack, Decay, Sustain, Release) AD (Attack, Decay) | Octave Selector | Yes | External Analog Audio Input | Yes | Controls | 16 x velocity and pressure sensitive pads 16 x encoders | Sequencer | Sequence Memories: 64 Number of Steps: 64 Sequence 1: Pitch, gate, velocity, and pressure Sequence Modulations (Seq 2 & 3): Gates, LFOs, AD Envelopes, and more Sequencer Modes: Real-time or step recording | Full Function Arpeggiator | 8 x modes 8 x time divisions Swing: 50% to 75% 1 x hold/latch function | CV In/Out Controls | Patchbay 1/8" / 3.5 mm miniature mono jacks CV Inputs: Eurorack level signals, 100 kOhm, ±5 Vx (Exception: Pitch CV inputs are 6.8 MOhm impedance) CV Outputs: Eurorack level signals, 680 Ohm, ±5 V Clocks / Gates Inputs: Eurorack level signals, 68 kOhm, 0 V/+5 V Clocks / Gates Outputs: Eurorack level signals, 2 kOhm, 0 V/+5 V | MIDI Input | Yes (5-pin DIN connector) | MIDI Output | Yes (5-pin DIN connector) | USB MIDI Input | Yes | USB MIDI Output | Yes | Audio Output | 1 x 1/4" / 6.3 mm audio jack | Headphone Output | 1 x 1/4" / 6.3 mm headphone jack | Tempo Knob | Yes | Tap Tempo | Yes | MIDI Sync | Yes | Enclosure | Rugged aluminum and wood enclosure | Power Supply | 12 VDC / 2.5 A (power) | Dimensions (WxDxH) | 19.0 x 11.0 x 2.2" / 484 x 277 x 56 mm | Weight | 7.7 lb / 3.5 kg | | Box Dimensions (LxWxH) | 23.4 x 13.2 x 4.4" | - RackBrute 6U Eurorack Case with Integrated Link System (176 HP)
Format | Eurorack: 176 HP Rails: Nut strip | Enclosure | Aluminum | Power Module | Power Module: 5 HP Up to 1600 mA on +12 V and 1600 mA on -12 V (4 separate circuits of 800 mA) Up to 900 mA on 5 V Power Rail Noise Filtering: Yes Standard Power Slots: 32 standard power slots 20-slot zone with up to 800 mA on +12V and -12V 12-slot zone with up to 800 mA on +12 V and -12 V | Compatible With | Link system and smart handle to fasten a MiniBrute 2/2S or another RackBrute unit in various configurations | Protection | Built-in spacers for the highest protection in transport configuration | Dimensions (W × H × D) | 19.0 x 13.2 x 3.3" / 48.3 x 33.5 x 8.4 cm | Weight | 8.3 lb / 3.8 kg | | Box Dimensions (LxWxH) | 25.2 x 13.5 x 6.1" | - RackBrute Travel Bag for RackBrute and MiniBrute 2 EcoSystems
Carry/Transport Options | Shoulder Strap | Closure Type | Zipper | Exterior Dimensions | 22.0 x 11.0 x 14.0" / 55.9 x 27.9 x 35.6 cm | Weight | 5.0 lb / 2.3 kg | | Box Dimensions (LxWxH) | 26.0 x 14.0 x 11.0" |
Rating60% users recommend this product to others. And what about you?
This product has already been rated by 79 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
looking for a user manual for Quickbooks Premier Nonprofit 2020 for a Disabled American Veterans office.... Bower SFD9260.... 4-IN-1 WIRELESS CHARGER
... Brand :Gemini,model # XGA 4000,AND IT WAS PURCHASED NEW IN 2022,OR POSSIBLY EARLY 2023.WORKED perfect till one day I hit power switch and blew fuse x2... ZZSTAR binoculars...
|
Discussion |
Latest contributions to the discussion:
v18 Name: Craig Mcinturff Davis & Sanford Provista 7518B Tripod I am looking for a camera mounting plate for a v18 fluid head Davis & Sandford ... Impact SF-ABRL160 Flash stopped working Name: Sarah sananes Impact SF-ABRL160 Stand Mount Flash with Hello, our flash is connected to a canon camera and all of the sudden the flash is no longer working.
Does the flash have a certain battery life? ... REPEAT REQUEST AS YOU DID NOT ANSWER YOU JUST SENT ME MY MESSAGE BACK -PLEASE HELP Name: Tish Hopkins Benro TAD37C Series 3 Adventure Carbon Hi again-- all this did was send this email back to me with a link that brought me right back here... what is this?? also a link to search for manuals-- ive been there done that there is NO Manual to be found that answers my ? Please HELP thanks!!
Hi there is an extra small sc... Tripod heads DO NOT sit flush on the plate of the tripod Help Please Name: Tish Hopkins Benro TAD37C Series 3 Adventure Carbon Hi there is an extra small screw on the plate that the tripod head screws on that prevents my gimbal tripod head from sitting flush when it is screwed on. this is very annoying and does not allow my camera to stay steady when shooting. Please tell me how to resolve this issue. th... battery replacement Name: Danette L Boyd-Perez Doxie Go SE Portable Scanner Hello-- I have been working w/ support- it seems they sent incorrect battery replacement.
I confirmed DX-255 and was sent battery NP 120. There is no way that battery fits inside the panel of the DX-255. Please advise next steps thank you....
|
|