|
User Manual for Audio-Technica Complete Antenna and Power Distribution Package for up to 4 Audio-Technica 2000 and 3000 Series Wireless Microphone Systems Click to enlarge the picture
Contents of the user manual for the Audio-Technica Complete Antenna and Power Distribution
- Product category: Antenna Accessories Audio-Technica
- Brand: Audio-Technica
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Audio-Technica Antenna Accessories
|
User manual for the Audio-Technica Complete Antenna and Power Distribution contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Audio-Technica product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Audio-Technica user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Audio-Technica product will considerably shorten its lifespan!
|
Product description Exclusively through , this Audio-Technica Antenna and Power Distribution Package is intended for use with the Audio-Technica 2000 and 3000 wireless microphone systems. Choosing an antenna distribution system is often challenging, and this package is compiled to eliminate the confusion associated with wireless microphone antenna and power distribution.Power and antenna distribution is simply a convenient and efficient way to use multiple wireless microphone systems in a single setting. The Audio-Technica ATW-DA49 distributor is capable of sending a conditioned antenna-signal (RF) to four 2000 or 3000 receivers, from a single pair of Audio-Technica ATW-A49 wide-band antennas. The result eliminates the need for multiple antennas and provides clear, interference-free reception. Furthermore, a single distributor will power up to four wireless receivers, eliminating bulky power cords and preserving electrical outlets for additional gear.This package will distribute antenna signal and power to 4 Audio-Technica 2000 and 3000 wireless microphone systems. Included with this package is a single ATW-DA49 antenna and power distributor, a pair of ATW-A49 wideband antennas and two antenna cables. Also included are two 13-inch goosenecks, two podium flange mounts and two spring-loaded clamps for permanent and mobile antenna mounting. This exclusive package is an ideal and efficient solution for running multiple Audio-Technica 2000 or 3000 series wireless microphone systems in theaters, schools, houses-of-worship, conferences and more. - Audio-Technica ATW-DA49 UHF Antenna Distribution System The Audio-Technica ATW-DA49 is an active antenna distribution system that feeds up to four external 2000 and 3000 series receivers. The ATW-DA49 minimizes the bulk and excessive antenna cable runs when using multiple wireless systems. The ATW-DA49 operates on a wide-band carrier range between 440 to 900 MHz and is compatible with the Audio-Technica 2000 and 3000 series receivers, as well as any system operating on that band. In addition, four 12 VDC outputs provide power to external receivers, further minimizing bulk and excess power cables.
- Four Channels
- The ATW-DA49 provides antenna RF distribution to up to four 2000 and 3000 series receivers
- Wide Band Operation
- The ATW-DA49 operates on a wide band between 440 - 900 MHz
- Power Distribution
- Four 12 VDC outputs provide power to up to four external receivers
UPC: 042005145874 - Audio-Technica AT8631 Joining Plate for Two Wireless Receivers The AT8631 Joining Plate for Two Wireless Receivers from Audio-Technica allows two half-rack wireless receivers to be mounted in a single 19" rack space. It is compatible with Audio-Technica's System 10 PRO, 3000 Series (fourth generation), 2000 Series, and ATDM-0604 Digital SmartMixers. Mounting screws are also included.
- 2 x Audio-Technica AC25 BNC to BNC Antenna Cable Audio-Technica BNC terminated antenna cable for wireless microphone receivers and antenna distribution systems. UPC: 042005124824
- Audio-Technica ATW-A49 UHF LPDA Antennas (Pair) The Audio-Technica ATW-A49 LPDA (Log Periodic Dipole Array) antennas are designed for use with Audio-Technica UHF wireless systems, operating over 440 - 900 MHz range. The wide-band antennas provide enhanced signal pick up while extending operating range and reliability. The directional coverage pattern features a beam-width of 90 degrees and is often useful in theatrical and musical performances as well as presentation. UPC: 042005133154
- 2 x On-Stage MSA9030-13B Gooseneck (13", Black) Styled in a black finish, the On-Stage MSA9030-13B is a 13" gooseneck that provides flexibility when recording up close or in hard-to-reach places. It comes with solid-steel 5/8"-27 male and female threaded ends and an interlocking rolled metal neck. It can support weights of up to 2.5 lb. UPC: 659814065769
- 2 x WindTech 8040 Microphone Stand Podium Mounting Flange The Windtech 8040 Podium Mounting Flange installs into podiums, desktop surfaces, etc. The flange mounts standard microphone mounts of all types and is exceptionally useful for goosenecks.
- 2 x On-Stage TM01 Microphone Table & Stand Clamp The On-Stage TM01 Microphone Table & Stand Clamp is an adjustable c-clamp with a 5/8"-27 threaded stud for a microphone adapter. The TM01 easily clamps onto desk edges, tubing, the shaft sections of microphone stands, instrument stands, percussion instruments and more. The removable mic-clip adapter can be placed in 3 different hole locations. The mounting block is removable and features a flat side to clamp to flat surfaces, and a v-groove side to clamp onto microphone stands. UPC: 659814529629
In the Box - ATW-DA49 UHF Antenna Distribution System for 2000 and 3000 Series Wireless Systems utuasvcbyrde
- IEC 320/C14 Power Cable
- 10 x BNC-to-BNC 34" RF Cables
- 4 x DC Power Interconnect Cables
- ATW-RM1 Rack-Mount Hardware Kit
- Limited 2-Year Warranty
- AT8631 Joining Plate for Two Wireless Receivers
- 2 x AC25 BNC to BNC Antenna Cable (25 Feet) (7.62 Meter)
- ATW-A49 UHF LPDA Antennas (Pair)
- 2 x On-Stage - MSA9030-13B Gooseneck (13", Black)
- 2 x WindTech - 8040 Microphone Stand Podium Mounting Flange with Screws (1.75" Diameter) (Black)
- 2 x On-Stage - TM01 Microphone Table & Stand Clamp
Table of Contents
|
Upload User Manual
Have you got an user manual for the Audio-Technica Complete Antenna and Power Distribution Package for up to 4 Audio-Technica 2000 and 3000 Series Wireless Microphone Systems in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Audio-Technica ATW-DA49 UHF Antenna Distribution System
| # Of Channels | 4 | | RF Input | 2 x BNC Female | | RF Output | 4 x BNC Female | | RF Frequency Range | 440 - 900 MHz | | Attenuation / Gain | 0 dB typical (within specified bandwidth) | | Impedance | 50 Ohms typical (within specified bandwidth) | | Operating Voltage | +12 VDC, 3 A | | Weight | 2.0 lbs (0.9 kg) | | Dimensions (W x H x D) | 8.27 x 1.79 x 6.93" (210.0 x 45.5 x 176.0 mm) | | | | Box Dimensions (LxWxH) | 14.882 x 13.307 x 3.78" | - Audio-Technica AT8631 Joining Plate for Two Wireless Receivers
| Compatible with these Models | System 10 Pro, 3000 series (fourth generation), 2000 series, and ATDM-0604 digital smartmixers | | Dimensions | Not specified by manufacturer | | Weight | Not specified by manufacturer | | | | Box Dimensions (LxWxH) | 6.0 x 5.0 x 0.2" | - 2 x Audio-Technica AC25 BNC to BNC Antenna Cable
| | | Box Dimensions (LxWxH) | 10.65 x 10.2 x 2.65" | - Audio-Technica ATW-A49 UHF LPDA Antennas (Pair)
| | | Box Dimensions (LxWxH) | 12.2 x 11.6 x 2.5" | - 2 x On-Stage MSA9030-13B Gooseneck (13", Black)
| Gooseneck Length | 13.0" / 33.0 cm | | Thread | 1 x 5/8"-27 male
1 x 5/8"-27 female | | Weight Capacity | 2.5 lb / 1.1 kg | | | | Box Dimensions (LxWxH) | 14.0 x 3.75 x 0.5" | - 2 x WindTech 8040 Microphone Stand Podium Mounting Flange
| | | Box Dimensions (LxWxH) | 1.5 x 1.5 x 0.02" | - 2 x On-Stage TM01 Microphone Table & Stand Clamp
| | | Box Dimensions (LxWxH) | 5.9 x 4.2 x 1.0" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 84 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Manual for HP ThinC T530 Mini GX-215JJ Linux Mint...
Kingwin Super Speed 3.0 S/N KW11805020007...
Logitech MK850 Manual...
Swan Bread maker SWBBA7...
Expert intel sixcore i5-8400 4GHZ turbo...
|
| Discussion |
Latest contributions to the discussion:
Query
Name: Geoff Dibblee
Carson zOrb Digital USB Microscope
when useing the zorb it will not cover the whole of a stamp back or front as i am useing it for perfins stamps and whati have recived in the box just covers half a letter please can you help me to find away to enlarg the whole stamp
...
Blown transformer
Name: Dik Schouten
Demeter VTDB-2 Single Channel Tube Direct
Dear Sirs,where can i buy a new transformer for my VTDB 2b? If possible een 230 volt primary site...Y.S. Dik Schouten
...
Battery charger light does not turn yellow or green when charging LP-E17
Name: DAVE
Canon LC-E17 Charger for LP-E17 Battery
I have a new Canon battery charger for EOS R10 Camera. It has lights that turn yellow and green when charging the Canon battery that came with the camera. But when I put in the BM battery LP-E17 no lights come on. I can tell the battery is charged when I put it in the camera, b...
Stiff center dial wheel
Name: Reynolds, Jane
Tasco 10x50 Essentials Porro Binocular
It is very hard for me to turn the center wheel with the ridges on it.
Could you please email me the user manual for the Tasco 10 x 50 mm zip focus? Thank you...
Redfield 2-7x33
Name: Mike
Redfield 2-7x33 Revolution Riflescope
Can the elevation and windage knobs be reset to zero?
Thanks!...
|
|
