User manual
Audio-Technica Consumer AT-VM95SP H Cartridge and

User Manual for Audio-Technica Consumer AT-VM95SP H Cartridge and Headshell Combo Kit

• Product category: Turntable Accessories Audio-Technica Consumer
• Brand: Audio-Technica Consumer
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Audio-Technica Consumer Turntable Accessories

Product description

• AT-VM95SP Dual Moving Magnet Cartridge The Audio-Technica Consumer AT-VM95SP Dual Moving Magnet Cartridge is specifically designed to play 78 RPM mono records with remarkable tonal quality. The cartridge can be mounted to a standard 1/2" mount and features integrated threaded inserts, allowing it to be mounted with just two screws (no nuts required).
  
  The conical stylus has a spherical tip, which normally touches the center of the record groove walls. This design is well suited for older players with higher tonearm tracking forces. The cartridge is stereo, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. All VM95 Series share the same body, allowing the stylus to be replaced with any of the six interchangeable AT-VMN95 replacement styli. The Audio-Technica Consumer AT-VM95SP ships with mounting hardware.
  • • VM95 Series dual-magnet cartridge with 3.0 mil conical stylus for 78 RPM records
    • Aluminum cantilever
    • Durable low-resonance polymer housing
    • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws—no nuts or washers required
    • Compatible with any AT-VMN95 replacement stylus
• AT-HS6 9g Headshell Aluminum Die Cast Body (Black) The black Audio-Technica Consumer AT-HS6 is a lightweight (9g) headshell mount. Featuring an aluminum die-cast body, it is designed to keep vibration to the bare minimum. The finger lift is positioned near the front of the headshell to enable precise placement of the stylus onto the record. The headshell is equipped with quad wire terminals and comes with mounting hardware.

• Set of Mounting Hardware (4 x Screws and 2 x Washers)

• Limited 1-Year Warranty

• Mounting Hardware

• Limited 1-Year Warranty

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• AT-VM95SP Dual Moving Magnet Cartridge

  Frequency Response	20 Hz to 20 kHz
  Tracking Force	4.5 to 5.5 g (2.0 g Standard)
  Recommended Load Impedance	47 kOhms
  Output	2.7 mV (1 kHz, 5 cm/Sec.)
  Channel Balance	1.5 dB (1 kHz)
  Stylus Shape	3.0 mm Conical
  Stylus Construction	Bonded Round Shank
  Stylus Cantilever	Aluminum Pipe
  Mount	0.5" / 1.27 cm
  Replacement Stylus	AT-VMN95SP
  Impedance	Coil Impedance: 3.3 kOhms (1 kHz)
  DC Resistance	485 Ohms
  Load Capacitance	100 to 200 pF
  Coil Inductance (Le)	550 mH (1 kHz)
  Static Compliance	12 x 10-6 cm/Dyne
  Dynamic Compliance	2 x 10-6 cm/Dyne (100 Hz)
  Vertical Tracking Angle	23°
  Dimensions	0.7 x 0.7 x 1.1" / 17.2 x 18.9 x 28.3 mm
  Weight	0.2 oz / 6.1 g

  Box Dimensions (LxWxH)	4.05 x 2.8 x 1.2"

• AT-HS6 9g Headshell Aluminum Die Cast Body (Black)

  Material of Construction	Headshell and Connector: Aluminum
  Dimensions (HxWxD)	Not Specified by Manufacturer
  Weight	0.3 oz / 9.0 g

  Box Dimensions (LxWxH)	3.15 x 2.5 x 1.8"

Rating

Discussion