|
User Manual for Auray Zoom H4n Complete Accessories Kit Click to enlarge the picture
Contents of the user manual for the Auray Zoom H4n Complete Accessories Kit
- Product category: Portable Recorder Accessories Auray
- Brand: Auray
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Auray Portable Recorder Accessories
|
User manual for the Auray Zoom H4n Complete Accessories Kit contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Auray product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Auray user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Auray product will considerably shorten its lifespan!
|
Product description If you use a Zoom H4n to track your audio, you should check out the Auray Zoom H4n Complete Accessories Kit from . It includes a custom windbuster to reduce noise and plosives, a wired remote control, a hot shoe to 1/4"-20 male post adapter, a line-to-mic attenuator cable, a 16GB SD card, and four rechargeable AA batteries with a charger.
The windbuster provides up to 30 dB of wind-noise reduction and also reduced vocal plosives while protecting your H4n from moisture and dirt. The hot shoe adapter allows you to mount the H4n right to your DSLR or camcorder, while the included line-to-mic attenuator cable lets you connect the line output of the recorder to the lower level mic input of your camera, creating a backup recording that can be used to help sync your audio to video in post.
The kit also has you covered for power and memory. The included 16GB SD card provides ample storage while the battery charger and four AA batteries can keep your H4n powered. - Auray WRW-H4N Custom Windbuster for Zoom H4n The Auray WRW Series Custom Windbusters provide dual layered wind protection and are designed to substantially reduce unwanted broadband wind noise and vocal pops with minimal high frequency loss.
This WRW-H4N Custom Windbuster has been tailor-made to fit the Zoom H4n and is designed to be used either on its own or over a foam windscreen. The simulated fur outer layer works in tandem with the acoustic cloth inner lining to protect the microphone element from air bursts without muffling the sound.
When used on the Zoom H4n, this windbuster is effective in minimizing wind noise and plosive sounds. It is most effective in light breeze to moderate breeze conditions (4-17 mph) and users can generally expect a 20dB to 30dB reduction in wind noise with modest dampening of high frequencies. For most applications, the modest high frequency dampening is a worthwhile exchange for the substantial wind noise reduction.
In addition to dual layered wind protection, the WRW-H4N helps prevent moisture and dirt from damaging your recorder's microphone. The windbuster is designed to fit the Zoom H4n recorder.
The WRW-H4N Custom Windbuster for the Zoom H4n digital recorder offers an extremely effective dual layered solution for wind protection. UPC: 847628562608 - Auray RCH4N - Remote Control for Zoom H4n The Auray RCH4N is a wired remote control that allows you to record, play, stop, pause, fast forward, rewind and create marks on your Zoom H4n audio recorder from up to six feet away. It also allows you to select the recording input source and then adjust record and playback levels.
- For use with your Zoom H4n recorder
- Record, play, stop, pause, fast forward, rewind and add marks from up to six feet away
- Recording indicator that glows red during recording, and blinks during standby
- Input indicator LEDs that glow green, yellow, or red to indicate the recording level
- Ideal for preventing handling noise
UPC: 847628570313 - Revo Hot Shoe to 1/4"-20 Male Post Adapter This Revo Hot Shoe to 1/4"-20 Male Post Adapter has a threaded 1/4"-20 stud on the top and a "cold" male flash shoe on the bottom. This handy little adapter allows you to mount camera accessories that only come with a 1/4"-20 socket to cameras, rigs, camera brackets, and any tripod or light stand that only feature a flash shoe. For added security, the knurled locking ring assures a tight connection to the accessory.
- Attaches to Camera Hot Shoe
- This adapter attaches to your camera's hot shoe, converting it into a 1/4"-20 male post.
- Compatible With Female 1/4"-20 Threads
- Mounts any item with a female 1/4"-20 thread to the camera hot shoe.
- Lightweight, Durable Aluminum Construction
- Made from durable and lightweight aluminum, this accessory won't weigh you and your gear down with unnecessary bulk and weight.
UPC: 847628555822 - Kopul ACH4-25MON Line-to-Mic Attenuator Cable The Kopul ACH4-25MON Line-to-Mic Attenuator Cable is designed to connect your digital recorder (e.g. Zoom H4n, Zoom H6, etc.) output to the mic level input of your DSLR camera with 25dB of attenuation to step down the hot line level audio to microphone level. It features a 1/8" headphone tap that allows you to monitor the signal to your camera and is shielded to reduce RF noise and provide interference-free operation.
The cable provides 25dB of attenuation to assure the output from your digital recorder is at an appropriate level for your camera's mic input. This backup recording can act as a fail-safe for your audio, as well as a reference track for easy syncing in post-production. The cable is 1-foot in length and features straight 1/8" connectors. - DSLR Compatibility
- The ACH4-25MON is compatible with DSLR cameras that feature a 1/8" unbalanced mic level input including:
Canon: - EOS Rebel T2i(550D)/T3i(600D)/T4i(650D)/T5i(700D)/SL1(100D)
- EOS 60D/70D/7D/6D
- EOS 5D MK ll/MK lll
- EOS 1DX/1DC/1D MK lV
Nikon: - D5100/D5200
- D7000/D7100
- D300S
- D600/D610
- D800/D800E
- D3S
- D4
Pentax: - K-5 ll/K-5 llS
UPC: 847628568006 - SanDisk 16GB Ultra UHS-I SDHC Memory Card (Class 10) Record Full HD 1080p video with this Class 10 compliant 16GB Ultra UHS-I SDHC Memory Card from SanDisk. With enhanced data read speeds of up to 80 MB/s this Ultra SDHC memory card is designed to suit the needs of compact and mid-range point and shoot cameras. You can also save and store a variety of files such as music, movies, documents and more. The writable label found on the card allows you to write down what is saved to the card while the built-in write protect switch helps to prevent accidental data loss. This card, as with most SanDisk cards, comes shock, temperature, x-ray, magnet, and waterproof to take your files with you nearly anywhere you go.
- Class 10 performance for Full HD Video (1080p)
- Read speeds up to 80 MB/s
- Writable label for easy identification and organization
- Engineered with UHS-I bus architecture
- This SD memory card comes shock, temperature, x-ray, magnet, and waterproof proof
UPC: 619659136451 - Watson 4-Hour Rapid Charger with 4 AA NiMH Rechargeable Batteries (2300mAh) This Watson 4-Hour Rapid Charger comes with four 1.2V, 2300mAh AA NiMH batteries that are rechargeable up to 1000 times. You can use it to charge four of the included batteries or optional AA NiCd, AAA NiMH, or AAA NiCd batteries. The charger's integrated micro-controller ensures that each battery is charged to its full capacity, and automatic charge cut-off prevents overcharging. Should the controller and automatic cut-off function both fail, the safety guard timer will kick in to ensure that the charger still shuts off after 6 hours. The charger also has circuit and polarity protection. Two LED indicators display charging status, and there are also two individually-monitored charging channels. The charger has switching 100-240 VAC power, enabling use all over the world. Its compact outlet prongs can fold in, making the unit more compact for storage. UPC: 847628536814
In the Box - WRW-H4N Custom Windbuster for Zoom H4n btssaxdysqwsbfzavebeewdzz
- RCH4N - Remote Control for Zoom H4n
- Revo - Hot Shoe to 1/4"-20 Male Post Adapter
- Kopul - ACH4-25MON Line-to-Mic Attenuator Cable
- SanDisk - 16GB Ultra UHS-I SDHC Memory Card (Class 10)
- Watson - 4-Hour Rapid Charger with 4 AA NiMH Rechargeable Batteries (2300mAh)
Table of Contents
|
Upload User Manual
Have you got an user manual for the Auray Zoom H4n Complete Accessories Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Auray WRW-H4N Custom Windbuster for Zoom H4n
| Box Dimensions (LxWxH) | 4.0 x 2.5 x 1.2" | - Auray RCH4N - Remote Control for Zoom H4n
Dimensions | 3.6 × 1.6 × 0.4" (9 × 4.1 × 1.1 cm) | Cable Length | 6.4' (1.95 m) | Weight | 1.9 oz (53 g) | | Box Dimensions (LxWxH) | 5.9 x 3.1 x 1.8" | - Revo Hot Shoe to 1/4"-20 Male Post Adapter
Bottom Mount | 1 x Accessory Foot | Top Mount | 1 x 1/4"-20 Male | | Box Dimensions (LxWxH) | 5.9 x 3.4 x 1.1" | - Kopul ACH4-25MON Line-to-Mic Attenuator Cable
Cable Length | 1' (30.5 cm) | Attenuation | 25 dB | Connector 1 | 1/8" (3.5 mm) straight TRS | Connector 2 | 1/8" (3.5 mm) straight TRS | Headphone Connector | 1/8" (3.5 mm) | Compatibility | Canon: - EOS Rebel T2i(550D)/T3i(600D)/T4i(650D)/T5i(700D)/SL1(100D)
- EOS 60D/70D/7D/6D
- EOS 5D MK ll/MK lll
- EOS 1DX/1DC/1D MK lV
Nikon: - D5100/D5200
- D7000/D7100
- D300S
- D600/D610
- D800/D800E
- D3S
- D4
Pentax: - K-5 ll/K-5 llS
| | Box Dimensions (LxWxH) | 6.0 x 3.9 x 0.5" | - SanDisk 16GB Ultra UHS-I SDHC Memory Card (Class 10)
Card Type | SDHC | Storage Capacity | 16 GB | Bus Type | UHS-I | Speed Class | 10 | Bus Interface Speed | UHS Class I | Data Transfer | Read Speed: 80 MB/s Maximum (Burst) Write Speed: 10 MB/s Minimum | Durability | Magnet-Proof, Shockproof, Temperature Extremes, Waterproof, X-Ray Proof | Operating Temperature | -13 to 185°F/ -25 to 85°C | Storage Temperature | -40 to 185°F/ -40 to 85°C | Built-in Write-Protect Switch | Yes | | Box Dimensions (LxWxH) | 4.3 x 4.0 x 0.1" | - Watson 4-Hour Rapid Charger with 4 AA NiMH Rechargeable Batteries (2300mAh)
| Battery Type | 4 x AA | Battery Chemistry | NiMH | Battery Voltage | 1.2 V | Capacity (mAh) | 2300 mAh | Maximum Recharge Cycles | 1000 | | AC Input Power | 100 to 240 VAC, 50 / 60 Hz | Charging Bays | 4 x AA, AAA | Charging Voltage | 2.8 VDC | Charging Amperage | 500 mA | Charger Dimensions | 4.25 x 2.75 x 1.25" / 108.00 x 70.00 x 32.00 mm | Charger Weight | 2.8 oz / 79.4 g | | Operating Temperature | 32 to 113°F / 0 to 45°C | | Box Dimensions (LxWxH) | 7.7 x 4.3 x 1.9" |
Rating94% users recommend this product to others. And what about you?
This product has already been rated by 45 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
looking for a user manual for Quickbooks Premier Nonprofit 2020 for a Disabled American Veterans office.... Bower SFD9260.... 4-IN-1 WIRELESS CHARGER
... Brand :Gemini,model # XGA 4000,AND IT WAS PURCHASED NEW IN 2022,OR POSSIBLY EARLY 2023.WORKED perfect till one day I hit power switch and blew fuse x2... ZZSTAR binoculars...
|
Discussion |
Latest contributions to the discussion:
v18 Name: Craig Mcinturff Davis & Sanford Provista 7518B Tripod I am looking for a camera mounting plate for a v18 fluid head Davis & Sandford ... Impact SF-ABRL160 Flash stopped working Name: Sarah sananes Impact SF-ABRL160 Stand Mount Flash with Hello, our flash is connected to a canon camera and all of the sudden the flash is no longer working.
Does the flash have a certain battery life? ... REPEAT REQUEST AS YOU DID NOT ANSWER YOU JUST SENT ME MY MESSAGE BACK -PLEASE HELP Name: Tish Hopkins Benro TAD37C Series 3 Adventure Carbon Hi again-- all this did was send this email back to me with a link that brought me right back here... what is this?? also a link to search for manuals-- ive been there done that there is NO Manual to be found that answers my ? Please HELP thanks!!
Hi there is an extra small sc... Tripod heads DO NOT sit flush on the plate of the tripod Help Please Name: Tish Hopkins Benro TAD37C Series 3 Adventure Carbon Hi there is an extra small screw on the plate that the tripod head screws on that prevents my gimbal tripod head from sitting flush when it is screwed on. this is very annoying and does not allow my camera to stay steady when shooting. Please tell me how to resolve this issue. th... battery replacement Name: Danette L Boyd-Perez Doxie Go SE Portable Scanner Hello-- I have been working w/ support- it seems they sent incorrect battery replacement.
I confirmed DX-255 and was sent battery NP 120. There is no way that battery fits inside the panel of the DX-255. Please advise next steps thank you....
|
|