User Manual for Axis Communications A1601 Network Door Controller Click to enlarge the picture
Contents of the user manual for the Axis Communications A1601 Network Door Controller
- Product category: Access Controllers Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Access Controllers
|
User manual for the Axis Communications A1601 Network Door Controller contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description The A1601 Network Door Controller from Axis Communications can handle advanced access management for midsize, large, or multi-site installations. The open platform allows you to mix and match third-party software and hardware, and enables integration with video surveillance, intrusion detection, and time and attendance systems. The controller can store up to 70,000 credentials, allowing it to function in offline mode. With PoE compatibility, only a single cable is required for installation. - Designed for easy integration with other systems
- Third-party software required
- Can power up auxiliary equipment with two powerful form C relays
- Delivers basic access control for installations with many sites or doors
- Supports advanced systems that use complex access control logic
In the Box Axis Communications A1601 Network Door Controller Mating Connectors Grounding Kit Cable Ties Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications A1601 Network Door Controller in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications A1601 Specs Readers | Up to Two Readers, RS-485 (OSDP)/Wiegand, with Supported Card Formats Integration with ASSA ABLOY Aperio and Simons Voss SmartIntego Wireless Lock Technologies | Doors | 1-2 Doors | Event History | 70,000 FIFO | I/O Interface | Reader I/O DC Output: 2 x 12 VDC, 545 mA 2 x 2 Configurable Supervised Inputs/Outputs Digital Input: 0 to 30 VDC Digital Output: 0 to 30 VDC Open Drain: 100 mA Maximum
Reader Data OSDP/RS-485 Half Duplex Wiegand
Auxiliary DC Output: 1 x 12 VDC, 50 mA 4 x Configurable Inputs/Outputs Digital Input: 0 to 30 VDC Digital Output: 0 to 30 VDC Open Drain: 100 mA Maximum
Door Connections 2 x 2 Supervised Inputs for Door Monitors and REX Digital Input: 0 to 30 VDC
External 2 x Configurable Inputs/Outputs for Auxiliary Equipment Digital Input: 0 to 30 VDC Digital Output: 0 to 30 VDC Open Drain: 100 mA Maximum | Security | Password Protection, IP Address Filtering, HTTPS Encryption, IEEE 802.1X Network Access Control, Digest Authentication, User Access Log, and Centralized Certificate Management | Supported Protocols | IPv4/IPv6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH | API | Open API for Software Integration, Including VAPIX ONVIF Profile C and A | Integration | AXIS A91 Network I/O Relay Module Series AXIS A4010-E Reader AXIS A4011-E Reader ASSA Aperio RS485 Communication Hub SimonsVoss SmartIntego TCP/IP GatewayNode | Tamper Detection | Removal of Unit Cover / Tamper Front Reader Tamper Tilting, Vibration | Event Log | Configurable by Time and Topic | Event Triggers | Tamper Detection, Power Loss, Network Loss, Configuration, Door, Event Logger, Hardware, Input Signal, Schedule, System, Time, and Virtual Inputs through API | Event Actions | Notification: Email, HTTP, HTTPS, TCP, and SNMP Trap External Output Activation, Status LED | Connectors | 1 x RJ45 10Base-T/100Base-TX PoE Terminal Blocks: DC Power, 14 Inputs/Outputs, RS-485/Wiegand, Relay, and Battery Detachable and Color-Coded Connectors for Ease of Installation Wire Size for Connectors: CSA: AWG 28-16, CUL/UL: AWG 30-14 | Casing | Aluminum PVC free | Memory | 512 MB RAM, 1 GB Flash | Power | Power Input: 10 to 28 VDC, 36 W Power over Ethernet (PoE) IEEE 802.3at Type 2 Class 4 12 V Battery as Backup Relay: 2 x Relay NO/NC, 2 A DC Max Power Output Lock: 2 x 12/24 VDC, 24 W Max Total Power Budget for Peripheral Devices: 2200 mA at 12 V if Powered by DC, 1400 mA at 12 V if Powered by PoE Class 4 | Approvals | EMC EN 55032 Class A, EN 50130-4, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, RCM AS/NZS CISPR 32 Class A, KC KN32 Class A, KC KN35
Safety IEC/EN/UL 62368-1, UL 2043
Environment EN 50581 | Languages | English, German, French, Spanish, Italian, Polish, and Dutch | Operating/Storage Temperature | -40 to 131°F / -40 to 55°C | Operating Humidity | 20 to 85% | Dimensions | 6.9 x 6.9 x 2.4" / 17.5 x 17.5 x 6.0 cm | Weight | 2.6 lb / 1.2 kg |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 96 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|