User Manual for Axis Communications AXISP7214 4-Channel Video Encoder Click to enlarge the picture
Contents of the user manual for the Axis Communications AXISP7214 4-Channel Video Encoder
- Product category: Video Encoders & Decoders Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Video Encoders & Decoders
|
User manual for the Axis Communications AXISP7214 4-Channel Video Encoder contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description The AXIS Communications AXIS P7214 4-Channel Video Encoder (NTSC) offers efficient integration of analog cameras into an IP-based video surveillance system and is ideal for locations such as gas stations, convenience stores, and small offices.
This video encoder enables a cost-effective way to gain all the benefits of a professional network video without discarding the existing analog investments. The video encoder offers advanced network capabilities with great video performance and high audio quality.
This video encoder provides H.264 and Motion JPEG streams. Support for H.264 offers a superb video compression format that drastically reduces bandwidth and storage requirements without compromising image quality. This video encoder offers one H.264 and one Motion JPEG stream per channel at full frame rate in all resolutions up to D1 720 x 480 NTSC.
The encoder offers intelligent video capabilities such as video motion detection, active tampering alarm, and two-way audio with audio detection. The video encoder supports power over Ethernet (IEEE 802.3af), which enables the encoder to receive power through the network cable. It also supports pan, tilt, and zoom functions, thus enabling the control of analog PTZ cameras. In the Box Axis Communications AXISP7214 4-Channel Video Encoder (NTSC) (10 Pack) Installation Guide CD with Installation & Management Tool Software & User Manual Windows Decoder User License 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications AXISP7214 4-Channel Video Encoder in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications P7214 Specs | Number of Channels | 4-channel video encoder | | Video Compression | H.264 (MPEG-4 Part 10 / AVC) Baseline and Main Profile
Motion JPEG | | Resolutions | 176 x 120 to 720 x 576, 176 x 120 to 1536 x 1152 for quad view | | Frame Rate H.264 | 30 fps (NTSC)
15 fps in quad view in full resolution | | Frame Rate Motion JPEG | 30 fps (NTSC)
15 fps in quad view in full resolution | | Video Streaming | One individually configured H.264 and one Motion JPEG stream per channel at full frame rate
More streams if identical or limited in frame rate/resolution
Controllable frame rate and bandwidth VBR/CBR H.264 | | Image Settings | Compression, color, brightness, contrast Rotation: 90, 180, and 270° Aspect ratio correction, mirroring of images, text and image overlay, privacy mask, enhanced de-interlace filter, video termination, antialiasing, temporal noise filtering | | Audio Streaming | Two-way, full duplex, and half duplex (mic / line input 1 / line output). Two-way, full duplex, and half duplex (mic / line input 2 / line output) | | Audio Compression | In: AAC-LC 8 or 16 kHz 8-64 kbit/s, G.711 μ-law PCM 8 kHz
64 Kbps G.726 ADPCM 8 kHz 32 Kbps or 24 Kbps
Out: G.711 μ-law PCM 8 kHz 64 Kbps, μ-law PCM 16 kHz
128 Kbps G.726 ADPCM 8 kHz 32 Kbps or 24 Kbps | | Audio Input / Output | External microphone input or line input Line level output Audio streaming, record (AU) and play uploaded (WAV, AU) clips AU (G.711 μ-law 8-bit 8/16 kHz mono), WAV (PCM 16-bit 8/16 kHz mono) | | | | Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log | | Supported Protocols | IPv4/v6, HTTP, HTTPS, IEEE 802.1X QoS layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1 /v2c / v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS | | | | Application Programming Interface | Application Programming Interface | | Intelligent Video | Video motion detection, active tampering alarm, audio detection | | Alarm Triggers | Intelligent video, video loss, external inputs | | Alarm Actions | File upload via FTP, HTTP and email; notification via email, HTTP and TCP; external output activation; video and audio recording to edge storage; pre- and post-alarm video buffering, PTZ preset, play audio clip | | Pan/Tilt/Zoom | Up to 1, 100 presets / camera, guard tour, PTZ control queue
Supports Windows-compatible joysticks
Wide range of analog PTZ cameras supported (drivers available for download at www.axis.com) | | | | Casing | Wall-mount | | Processors and Memory | ARTPEC-4, 512 MB RAM, 128 MB Flash | | Power | 8 to 20 VDC maximum: 7 W
Power over Ethernet IEEE 802.3af Class 3 | | Connectors | 1 x DC input terminal block
4 x analog composite video BNC inputs
RJ-45 10BASE-T/100BASE-TX PoE Terminal block for four configurable external inputs / outputs
Terminal block for RS-485/422 (full duplex) 2x 3.5mm jacks for microphone or line input (mono)
3.5mm jack for audio output (mono) | | Edge Storage | 1x micro SDHC card | | Operating Conditions | 32 to 122°F (0 to 50°C)
Humidity 20 to 80% RH (non-condensing) | | Approvals | EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN61000-6-1, EN61000-6-2, EN 60950-1, C-tick AS/NZS CISPR 22, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, KCC Class B, UL / IEC / EN 60950-1 | | Overall Dimensions | W x H: 6.8 x 4.3'' (172 x 109 mm) | | Weight | 0.46 lb (210 g) |
Rating60% users recommend this product to others. And what about you?
This product has already been rated by 59 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
