User Manual for Axis Communications F44 Main Unit with Dual Audio Inputs Click to enlarge the picture
Contents of the user manual for the Axis Communications F44 Main Unit with
- Product category: Interface Modules Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Interface Modules
|
User manual for the Axis Communications F44 Main Unit with contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description Connect up to four image sensors (available separately) to the F44 Main Unit with Dual Audio Inputs from Axis Communications. The F44 features four RJ12 connectors to allow the connection of up to four Axis sensor units to monitor indoor areas in up to 1080p resolution at 15 fps, each over a single RJ45 PoE port. The unit has the ability to accept audio from up to two sources simultaneously when using the included adapter cable. With two SD slots that each support up to 64GB, this main unit can record and store high-quality video using H.264 and MJPEG compression codecs from all connected sensor units. - Supports up to 1080p video recording at 15 fps
- RJ45 Ethernet connection with PoE
- Record from up to four sensor units simultaneously via RJ12 connectors
- Wide Dynamic Range (up to 120 dB) for compatible sensor units
- Dual audio inputs with included cable
- Axis Zipstream technology helps to optimize bandwidth using H.264 compression
- Two SD memory card slots each support up to 64GB for edge-storage (available separately)
- ONVIF-compliant, profiles S and G
In the Box Axis Communications F44 Main Unit with Dual Audio Inputs Stereo/Mono Adapter Cable Windows Decoder 1-User License AVHS Authentication Key Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications F44 Main Unit with Dual Audio Inputs in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications 0936-001 Specs | | | Compression | H.264 (MPEG-4 Part 10/AVC) baseline, main, and high profiles, MJPEG | | Resolution | 1920 x 1080 to 480 x 270
1280 x 720 to 480 x 270 | | Frame Rate | 1080p with No WDR: 12.5/15 fps (50/60 Hz)
720p with No WDR: 25/30 fps (50/60 Hz)
720p with WDR: 12.5/15 fps (50/60 Hz) | | Streaming | Multiple, individually configurable streams in H.264 and MJPEG
Axis' Zipstream technology in H.264
Controllable frame rate and bandwidth
VBR/MBR H.264
Quad view, maximum 1080p resolution
25/30 fps (50/60 Hz) with 720p capture mode
12.5/15 fps (50/60 Hz) with 1080p capture mode | | Image Settings | Compression, color, brightness, sharpness, contrast, white balance, exposure value, exposure control, exposure zones, local contrast, rotation, corridor format, text and image overlay, privacy mask, mirroring of images, Wide Dynamic Range (Forensic Capture, up to 120 dB) | | | | Streaming | Audio 1: Two-way, full duplex and half duplex (mic/line input/line output)
Audio 2: Two-way, full duplex and half duplex (mic/line input/line output) | | Compression | AAC-LC 8/16 kHz, 8-64 kbps
G.711 PCM 8 kHz 64 kbps
G.711 PCM 16 kHz 128 kbps
G.726 ADPCM 8 kHz 32 or 24 kbps
Configurable bit rate | | Input/Output | External microphone or line input (2 microphone or line inputs with included Axis Stereo-to-Mono Adapter), line output | | | | Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log, Centralized Certificate Management | | Protocols | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH | | | | Application Programming Interface | Open API for software integration, including VAPIX and Axis Camera Application Platform (ACAP)
Axis Video Hosting System (AVHS) with One-Click Connection, ONVIF Profiles S and G | | Analytics | Axis Video Motion Detection 3, active tampering alarm, audio detection
Support for Axis Camera Application Platform enabling installation of Axis Cross Line Detection and third-party applications | | Event Trigger | Analytics, external inputs, edge storage events | | Event Action | File Upload: Email, FTP, HTTP, HTTPS, network share
Notification: Email, HTTP, HTTPS, and TCP
Pre- and post-alarm video buffering
Video and audio recording to edge storage, play audio clip, external output activation, WDR mode | | Built-In Installation Aids | Pixel counter | | Data Streaming | Event data | | | | Casing | Aluminum | | Sustainability | PVC-free | | Memory | 1024 MB RAM, 256 MB Flash | | Power | Power over Ethernet (PoE) IEEE 802.3af/802.3at Type 1 Class 3, maximum 12.95 W
8-28 VDC, maximum 13.33 W | | Connectors | RJ45 for 10Base-T/100Base-TX PoE
4 x RJ12 for sensor units
6-pin terminal block for four configurable inputs/outputs (12 VDC output), 50 mA maximum load
3.5 mm mic/line in, 3.5 mm line out
5-pin terminal block RS232
2-pin terminal block for 8-28 VDC input | | Storage | 2 x SD/SDHC/SDXC slots, each supporting memory card up to 64 GB (available separately)
Support for recording to dedicated network-attached storage (NAS) (available separately) | | Video Management Software | Axis Companion, Axis Camera Station, and video management software from Axis' Application Development Partners | | Languages | English, German, French, Spanish, Italian, Russian, Simplified Chinese, Japanese, Korean, Portuguese, Traditional Chinese | | Operating Temperature | -22 to 140°F (-30 to 60°C) | | Operating Humidity | 10 to 85% RH, non-condensing | | Storage Temperature | -40 to 149°F (-40 to 65°C) | | Approvals | EN 50581, IEC/EN/UL 60950-1, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-60, IEC 60068-2-78, IEC 60529 IP4X, FCC Part 15 Subpart B Class A | | Dimensions | 2 x 4.7 x 4.7" (51 x 121 x 121 mm) | | Weight | 1.2 lb (0.54 kg) | | | | Package Weight | 1.75 lb | | Box Dimensions (LxWxH) | 7.5 x 6.6 x 3.05" |
Rating60% users recommend this product to others. And what about you?
This product has already been rated by 59 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
