User Manual for Axis Communications M1125-E 2MP Outdoor Box Camera Click to enlarge the picture
Contents of the user manual for the Axis Communications M1125-E 2MP Outdoor Box
- Product category: Wired IP Cameras Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Wired IP Cameras
|
User manual for the Axis Communications M1125-E 2MP Outdoor Box contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description The M1125-E 2MP Outdoor Box Camera from AXIS Communications uses a 1/2.8" progressive-scan CMOS sensor for 1920 x 1080 resolution at 30 fps, and it features a 3-10.5mm varifocal lens for a 91° to 32° horizontal field of view. Wide dynamic range offers high-quality images in ambient lighting, and brightness, sharpness, white balance, and backlight compensation features allow you to configure your camera based on different environments. The camera also comes with built-in analytics, such as motion detection, active tampering alarm, autotracking, and line crossing. When any of these events occur, the camera will send you an email notification or store video recordings of the event to your edge storage.
The camera compresses footage using H.264 and MJPEG formatting, maximizing your bandwidth and storage. Additionally, video can be streamed in multiple individual streams, and frame rates and bandwidth are controllable for further customizing your network. A microSD slot supports on-site recording, however, the camera can also record remotely to a dedicated NAS. The network is secured with a number of safety features, including password protection, IP address filtering, and HTTPs encryption. PoE technology allows you to transfer both data and power over the same Ethernet cable, minimizing the amount of cables needed during installation, and the camera is IP66- and NEMA 4X-rated weatherproof and IK10-rated impact-resistant for use outdoors and in high-risk areas. - 1920 x 1080 resolution at 30 fps for clear, high quality video in real time
- 3-10.5mm varifocal lens, with an f/1.4 aperture, for a 91° to 32° horizontal FOV
- Multiple, individually configurable streams in H.264 and MJPEG formatting
- Controllable frame rate and bandwidth (VBR/CBR H.264)
- Multiple image settings such as WDR, exposure control, and text and image overlay
- Image enhancements include color, brightness, sharpness, white balance, and backlight compensation
- Motion detection, line crossing, autotracking, and active tampering alarms
- Analytics, external inputs, and edge storage events will trigger an event alarm
- When an alarm is triggered the camera will send you an email notification or save a video recording to edge storage
- Network security features such as password protection, IP address filtering, and HTTPs encryption
- PoE technology allows you to use one wire for both data and power
- microSD slot supports microSD cards for edge storage
- IP66- and NEMA 4X-rated weatherproof and IK10-rated impact-resistant housing
In the Box Axis Communications M1125-E 2MP Outdoor Box Camera T94Q01A Wall Mount Resistorx T20 Tool Connector Kit Limited 1-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications M1125-E 2MP Outdoor Box Camera in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications M1125-E Specs | | | Image Sensor | 1/2.8" progressive-scan RGB CMOS | | Lens | 3-10.5mm varifocal, IR corrected | | Aperture | f/1.4 | | Iris | DC-iris | | Lens Mount | CS-mount | | Field of View | Horizontal: 91° to 32°
Vertical: 49° to 18° | | Day/Night | Automatically removable infrared-cut filter | | Minimum Illumination | Color: 0.25 lux at f/1.4
B&W: 0.05 lux at f/1.4 | | Shutter Time | 1/43000 to 2 seconds | | | | Compression | H.264 Baseline, Main, and High Profile (MPEG-4 Part 10/AVC), MJPEG | | Resolutions | 1920 x 1080 to 160 x 90 | | Frame Rate | H.264: Up to 25/30 fps in all resolutions
MJPEG: Up to 25/30 fps in all resolutions | | Streaming | Multiple, individually configurable streams in H.264 and MJPEG
AXIS Zipstream technology in H.264
Controllable frame rate and bandwidth, VBR/CBR H.264 | | Image Settings | WDR - Forensic Capture: Up to 120 dB depending on the scene
Manual shutter time, Compression, Color, Brightness, Sharpness, Contrast, White balance, Exposure control (including automatic gain control), Exposure zones, Fine tuning of behavior at low light, Rotation: 0°, 90°, 180°, 270°, Aspect ratio correction, Text and image overlay, Privacy mask, Mirroring images | | PTZ | Digital | | | | Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, Digest authentication, User access log | | Supported Protocols | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH | | | | Application Programming Interface | Open API for software integration, including VAPIX and AXIS Camera Application Platform
AXIS Video Hosting System (AVHS) with One-Click Connection
ONVIF Profile S | | Analytics | Video motion detection, Active tampering alarm
AXIS cross line detection, AXIS digital autotracking and 3rd party applications
Support for AXIS Camera Application Platform, enabling installation of additional applications | | Event Trigger | Analytics, Edge storage events, External input | | Event Action | File Upload: FTP, HTTP, HTTPS, SFTP network share and email
Notification: email, HTTP, HTTPS, TCP, and SNMP trap
Video and audio recording to edge storage
Pre- and post-alarm video buffering, PTZ preset, Guard tour
Send video clip, Day/Night vision mode, WDR mode, Status LED indicator, Output port | | Data Streaming | Event data | | Built-In Installation Aids | Pixel counter | | | | Casing | IP66- and NEMA 4X-rated, IK10-rated impact-resistant polymer enclosure | | Memory | 512 MB RAM, 256 MB Flash | | Power | 8 to 28 VDC
Power over Ethernet IEEE 802.3af Class 2
Max: 5.0 W, Typical: 3.6 W | | Connectors | RJ45 for 10BASE-T/100BASE-TX PoE
Terminal block for 1 input and 1 output (12 VDC output, 15 mA max load)
DC input, terminal block | | Storage | microSD/SDHC/SDXC slot supports edge storage
Support for recording to dedicated network-attached storage (NAS) | | Operating Conditions | -4 to 122°F / -20 to 50°C | | Humidity | 10 to 100% RH (non-condensing) | | Video Management Software | AXIS Camera Companion, AXIS Camera Station, Video management software from AXIS Application Development Partners | | Approvals | EN 55022 Class A, EN 61000-6-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 55024, EN 50121-4, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, C-tick AS/NZS CISPR 22 Class A, KCC KN22 Class A, KN24, EN 50581, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-78
IEC/EN/UL 60950-22, IEC/EN 60529 IP66, NEMA 250 Type 4X, IEC/EN 62262 IK10, IEC 60721-4-4 Class 4M4 | | Dimensions | 8.7 x 5.4 x 17.6" / 222.0 x 137.0 x 448.0 mm including wall mount | | Weight | 3.5 lb / 1.6 kg including wall mount | | | | Package Weight | 5.65 lb | | Box Dimensions (LxWxH) | 19.5 x 9.2 x 7.3" |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 72 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
