User Manual for Axis Communications M7014 Video Encoder Click to enlarge the picture
Contents of the user manual for the Axis Communications M7014 Video Encoder
- Product category: Video Encoders & Decoders Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Video Encoders & Decoders
|
User manual for the Axis Communications M7014 Video Encoder contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description The AXIS Communications M7014 Video Encoder (10 Pack) (NTSC) offers high quality video, efficient and affordable integration of analog cameras into a powerful IP-based video surveillance system, and is ideal for locations such as gas stations, convenience stores and small offices. It ranges up to four channels, providing H.264 and Motion JPEG streams. The support for H.264 offers a video compression format that drastically reduces bandwidth and storage requirements without compromising image quality
This video encoder offers H.264 and Motion JPEG stream per channel at 15 fps in all resolutions up to D1 (720 x 480 NTSC). It also provides intelligent video capabilities such as video motion detection and active tampering alarm. The micro SDHC memory card slot facilitates edge storage.
It includes support for Power over Ethernet (IEEE 802.3af), which enables the encoders to receive power through the network cable. Moreover, it provides pan, tilt, and zoom support, enabling control of analog PTZ cameras. In the Box Axis Communications M7014 Video Encoder (10 Pack) (NTSC) Power Supply Mounting & Connector Kit Installation Guide CD with Installation & Management Tool Software & User's Manual Windows Decoder User License 1-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications M7014 Video Encoder in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications M7014 Specs | Number of Channels | 4 | | Video Compression | H.264 (MPEG-4 Part 10 / AVC) Baseline and Main Profile
Motion JPEG | | Resolutions | 176 x 120 to 720 x 576, 176 x 120 to 1536 x 1152 for quad view | | Frame Rate H.264 | 15 fps in all resolutions | | Frame Rate Motion JPEG | 15 fps in all resolutions | | Video Streaming | One individually configured H.264 and one Motion JPEG stream per channel at 15 fps
More streams if identical or limited in frame rate/resolution
Controllable frame rate and bandwidth VBR/CBR H.264 | | Image Settings | Compression, color, brightness, contrast Rotation: 90°, 180°, 270° Aspect ratio correction, mirroring of images, text and image overlay, privacy mask, enhanced de-interlace filter, video termination, antialiasing, temporal noise filtering | | | | Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log | | Supported Protocols | IPv4/v6, HTTP, HTTPS, IEEE 802.1X QoS layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1 /v2c / v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS | | | | Application Programming Interface | Open API for software integration, including VAPIX from Axis Communications ONVIF | | Intelligent Video | Video motion detection, active tampering alarm | | Alarm Triggers | Intelligent video, video loss | | Alarm Actions | File upload via FTP, HTTP and email, notification via email, HTTP and TCP, PTZ preset | | Pan/Tilt/Zoom | Wide range of analog PTZ cameras supported | | PTZ Support | Up to 1,100 presets / camera, guard tour, PTZ control queue
Supports Windows compatible joysticks | | | | Casing | Wall-mount | | Processors and Memory | ARTPEC-4, 512 MB RAM, 128 MB Flash | | Power | 8 to 20 VDC, maximum: 7 W
Power over Ethernet IEEE 802.3af Class 3 | | Connectors | 1 x DC input terminal block
4 x analog composite video BNC inputs
RJ-45 10BASE-T/100BASE-TX PoE
Terminal block for RS-485/422 (full duplex) | | Edge Storage | 1 x micro SDHC | | Operating Conditions | 32 to 122°F (0 to 50°C) Humidity 20 to 80% RH (non-condensing) | | Approvals | EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN61000-6-1, EN61000-6-2, EN 60950-1, C-tick AS/NZS CISPR 22, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, KCC Class B, UL / IEC / EN 60950-1 | | Overall Dimensions | W x H: 4.3 x 6.8 " (172 x 109 mm) | | Weight | 1.26 lb (570 g) | | | | Package Weight | 18.45 lb | | Box Dimensions (LxWxH) | 7.0 x 6.0 x 4.0" |
Rating50% users recommend this product to others. And what about you?
This product has already been rated by 30 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
