User Manual for Axis Communications P1264 720p Network Pinhole Camera Click to enlarge the picture
Contents of the user manual for the Axis Communications P1264 720p Network Pinhole
- Product category: Wired IP Cameras Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Wired IP Cameras
|
User manual for the Axis Communications P1264 720p Network Pinhole contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description Designed for covert surveillance, the P1264 720p Network Pinhole Camera from Axis Communications consists of a P12 Mk II main unit and F1004 pinhole sensor unit. Together, the camera can capture 1280 x 720 resolution video at up to 30 fps. Wide Dynamic Range (WDR) and low light sensitivity allow the camera to produce accurate images in varying lighting conditions. The pinhole design lets you install the lens component flush on a flat surface when used with the included F8206 mounting bracket. The included 26' cable allows you to mount the main unit separately, where needed. - Contains the P12 Mk II main unit and F1004 pinhole sensor unit for a complete camera setup
- Captures 720p video at up to 30 fps
- 3.7mm lens has a 57° field of view
- Low light sensitivity with WDR
In the Box Axis Communications P1264 720p Network Pinhole Camera P12 Mk II Main Unit F1004 Pinhole Sensor Unit F8206 Mounting Bracket (5-Pack) 26' Black Sensor Cable AVHS Authentication Key Windows Decoder 1-User License Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications P1264 720p Network Pinhole Camera in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications 0925-001 Specs | | | Image Sensor | 1/4" progressive scan RGB CMOS sensor | | Lens | 3.7mm, f/2.5 | | Field of View | Horizontal: 57°
Vertical: 31° | | Minimum Illumination | 0.5 lux | | Shutter Speed | 1/24,500 to 1/6 sec | | | | Compression | H.264 (MPEG-4 Part 10/AVC) baseline, main, and high profiles, MJPEG | | Resolution | 1280 x 720 at 25/30 fps (50/60 Hz) | | Streaming | Multiple, individually configurable streams in H.264 (main, baseline and high profiles) and MJPEG, controllable frame rate and bandwidth, VBR/MBR H.264, Axis' Zipstream technology in H.264 | | Image Settings | Compression, color, brightness, sharpness, contrast, white balance, exposure value, exposure control, exposure zones, local contrast, rotation, corridor format, WDR, text and image overlay, privacy mask, mirroring of images | | | | Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log, centralized certificate management | | Supported Protocols | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SFTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH | | | | Application Programming Interface | Open API for software integration, including VAPIX and Axis Camera Application Platform (ACAP), Axis Video Hosting System (AVHS) with One-Click Connection, ONVIF Profile S | | Analytics | Axis Video Motion Detection 3, Active tampering alarm, support for Axis Camera Application Platform enabling installation of Axis Cross Line Detection and third-party applications | | Event Trigger | Analytics, edge storage events | | Event Action | File Upload: Email, FTP, HTTP, HTTPS, network share
Notification: Email, HTTP, HTTPS and TCP
Pre- and post-alarm video buffering
Send SNMP trap, WDR mode | | Built-In Installation Aids | Pixel counter | | Data Streaming | Event data | | | | Casing | P12 Mk II Main Unit: Steel and plastic
F1004 Pinhole Sensor Unit: Metal casing (aluminum) | | Memory | 512 MB RAM, 256 MB flash | | Power | Power over Ethernet IEEE 802.3af/802.3at Type 1 Class 2: Maximum 4 W, Typical: 2.5 W | | Connectors | Female RJ45 for 10Base-T/100Base-TX PoE
RJ12 for sensor unit | | Storage | Support for microSD/microSDHC/microSDXC card up to 64 GB (available separately) and recording to dedicated network-attached storage (NAS) (available separately) | | Operating Temperature | -4 to 122°F (-20 to 50°C) | | Operating Humidity | 10 to 85%, non-condensing | | Storage Temperature | -40 to 149°F (-40 to 65°C) | | Approvals | EMC: EN 55022 Class B, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, RCM AS/NZS CISPR 22 Class B
Safety: IEC/EN/UL 60950-1
Environment: IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-27 | | Video Management Software | Axis Companion, Camera Station, and video management software from Axis' application development partners | | Dimensions | P12 Mk II Main Unit: 0.65 x 1.8 x 4.3" (16.5 x 46 x 109 mm)
F1004 Pinhole Sensor Unit: 1.06 x 0.8 x 0.7" (27 x 20 x 18 mm)
Sensor Unit Cable: 26' (8 m) | | Weight | P12 Mk II Main Unit: 2.5 oz (72 g)
F1004 Sensor Unit: 0.5 oz (14 g)
Cable: 4.5 oz (128 g) | | | | Package Weight | 0.74 lb | | Box Dimensions (LxWxH) | 6.65 x 6.55 x 2.65" |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 06 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
