User Manual for Axis Communications P1365 Mk II 1080p Network Bullet Camera Click to enlarge the picture
Contents of the user manual for the Axis Communications P1365 Mk II 1080p
- Product category: Wired IP Cameras Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Wired IP Cameras
|
User manual for the Axis Communications P1365 Mk II 1080p contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description Able to produce clear images in low-light scenes with Lightfinder Technology, the P1365 Mk II 1080p Network Bullet Camera (No Lens) from Axis Communication has a 1/2.8" progressive scan CMOS sensor to capture 1920 x 1080 resolution video at up to 60 fps when used with a compatible lens (available separately). PoE technology provides a network connection and power source in a single Ethernet cable for a clean setup. Installation is simplified by this camera's stand, which allows for clean cable management. This camera is ONVIF compliant for a wide variety of applications. - 1/2.8" progressive scan CMOS sensor captures 1920 x 1080 resolution video at up to 60 fps
- Wide Dynamic Range and Lightfinder technology allows the camera to produce clear images in low-light scenes
- Two-way audio with built-in microphone
In the Box Axis Communications P1365 Mk II 1080p Network Bullet Camera (No Lens) Connector Kit Stand Windows Decoder 1-User License Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications P1365 Mk II 1080p Network Bullet Camera in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications P1365 Specs | | | Image Sensor | 1/2.8" progressive scan CMOS sensor | | Lens Mount | CS-mount | | Lens | N/A | | Aperture | N/A | | Field of View | N/A | | Day & Night | IR cut filter (auto) | | Minimum Illumination | Color: 0.11 lux
B/W: 0.01 lux at 50 IRE, f/1.3
HDTV 1080p 50/60 fps: Color: 0.22 lux
B/W: 0.02 lux at 50 IRE, f/1.3 | | Shutter Time | 1/66500 to 2 s | | | | Video Compression | H.264 (MPEG-4 Part 10/AVC) baseline, main, high profiles and MJPEG | | Resolutions | HDTV 1080p 25/30 fps (WDR): 1920 x 1080 to 160 x 90
HDTV 1080p 50/60 fps (no WDR): 1920 x 1080 to 160 x 90 | | Frame Rate | Up to 50/60 fps (50/60 Hz) | | Video Streaming | Multiple, individually configurable streams in H.264 and MJPEG
Axis Zipstream technology in H.264
Controllable frame rate and bandwidth
VBR/CBR H.264 | | Image Settings | Compression, color, brightness, sharpness, contrast, local contrast, white balance, exposure control, exposure zones, WDR-forensic capture (up to 120 dB), fine tuning of behavior at low light, 0, 90, 180, and 270° rotation, corridor format, text and image overlay, privacy mask, mirroring of images | | Pan/Tilt/Zoom | Digital PTZ
Uploadable PTZ driver (Pelco D preinstalled) | | | | Streaming | Two-way, full duplex | | Compression | AAC LC 8/16/32/48 kHz, G.711 PCM 48 kHz, G.726 ADPCM 48 kHz
Configurable bit rate | | Input/Output | External microphone input or line input, line output, built-in microphone (can be disabled) | | | | Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log | | Supported Protocols | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnPTM, SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SFTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH | | | | Application Programming Interface | Open API for software integration including VAPIX and Axis Camera Application Platform, Axis Video Hosting System (AVHS) with one-click connection, and ONVIF Profile S | | Analytics | Axis Video Motion Detection 3, active tampering alarm, audio detection, support for Axis Camera Application Platform enabling installation of Axis Cross Line Detection, Axis Digital Autotracking, and third-party applications | | Event Trigger | Analytics, edge storage events, external input, audio level, time scheduled | | Event Action | File upload: FTP, SFTP, HTTP, HTTPS, network share, and email
Notification: Email, HTTP, HTTPS and TCP
External output activation
Video recording to edge storage, play audio clip
Pre- and post-alarm video buffering
PTZ preset, guard tour, overlay text
Day/night switching, status LED activation
WDR mode
Send SNMP trap | | Data Streaming | Event data | | Installation | Focus assistant, pixel counter, remote back focus | | | | Casing | Metal (zinc)
Color: White NCS S 1002-B | | Memory | 512 MB RAM, 256 MB flash | | Power | 8-28 VDC:
Maximum: 7.3 W
Typical: 4.2 W
PoE IEEE 801.2af/at Type 1 Class 3:
Maximum: 6.8 W
Typical: 3.6 W | | Connectors | RJ45 10Base-T/100Base-TX PoE
4-pin 2.5 mm terminal block for two configurable inputs/outputs
RS-485/RS-422, 2 pcs, 2 pos, full duplex, terminal block
DC input, terminal block, 3.5 mm mic/line in, 3.5 mm line out
P-Iris connector (compatible with DC-iris) | | Storage | Support for microSD/microSDHC/microSDXC card
Support for recording to dedicated network-attached storage (NAS) | | Operating Temperature | 32 to 131°F (0 to 55°C) | | Storage Temperature | -40 to 149°F (-40 to 65°C) | | Operating Humidity (Relative) | 10 to 85% RH (non-condensing) | | Approvals | EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class B with shielded cable (STP), FCC Part 15 Subpart B Class A with unshielded cable (UTP), ICES-003 Class B, VCCI Class B, RCM AS/NZS CISPR 22 Class B, KCC KN32 Class B, KN35, IEC/EN/UL 60950-1 | | Video Management Software | Axis Camera Companion, Axis Camera Station | | Dimensions | Not specified by manufacturer | | Weight | Not specified by manufacturer | | | | Package Weight | 2.75 lb | | Box Dimensions (LxWxH) | 9.8 x 7.4 x 4.2" |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 58 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
