User Manual for Axis Communications P7214 Video Encoder Click to enlarge the picture
Contents of the user manual for the Axis Communications P7214 Video Encoder
- Product category: Video Encoders & Decoders Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Video Encoders & Decoders
|
User manual for the Axis Communications P7214 Video Encoder contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description Integrate up to four analog cameras into a modern digital IP-based surveillance system with the P7214 Video Encoder from Axis Communications. Packed with both H.264 and MJPEG compression formats to minimize bandwidth and storage use as well as the ability to handle four channels simultaneously in both formats, the P7214 is a simple way to upgrade your setup. It also supports D1 resolutions at up to 30 fps and has both single stream and quad view support in full resolution. Furthermore, it has RS-485/422 ports for full control over PTZ cameras.
Adding the P7214 encoder to your setup also benefits through the implementation of numerous intelligent functions, including video motion detection, a tampering alarm, and audio detection. Audio is not forgotten with two-way communication supported via input and output ports. Additionally, it has a microSD/SDHC card slot for internal storage as well as 802.3af/at PoE support for an 8-20 VDC power input. UPC: 733102103644 In the Box Axis Communications P7214 Video Encoder Power Supply Mounting & Connector Kits Windows Decoder User Licenses Installation CD-ROM Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications P7214 Video Encoder in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications P7214 Specs | | | Pan/Tilt/Zoom | Wide range of analog PTZ cameras supported 100 presets/camera, guard tour, PTZ control queue Supports Windows compatible joysticks | | | | Video Compression | H.264 (MPEG-4 Part 10/AVC) Baseline Profile (BP) and Main Profile (MP>
MJPEG | | Resolution | 176 x 120 to 720 x 576 176 x 120 to 1536 x 1152 for quad view | | Frame Rate | H.264: 30 fps, 15 fps in quad view
MJPEG: 30 fps | | Video Streaming | 1 H.264 and 1 MJPEG stream on each channel (8 streams in total)
More streams if identical or limited in frame rate/resolution
Controllable frame rate and bandwidth VBR/CBR H.264 | | Image Settings | Compression, color, brightness, contrast Rotation: 90°, 180°, 270° Aspect ratio correction Mirroring of images Text and image overlay Privacy mask Enhanced deinterlace filter Video termination Anti-aliasing Temporal noise filtering | | | | Audio Streaming | 2-way, full duplex and half duplex (mic/line input 1/line output) 2-way, full duplex and half duplex (mic/line input 2/line output) | | Audio Compression | In
AAC-LC: 8 or 16 kHz, 8-64 kbps
G.711 μ-law PCM: 8 kHz, 64 kbps
G.726 ADPCM: 8 kHz, 32 or 24 kbps
Out
G.711 μ-law PCM: 8 kHz, 64 kbps; 16 kHz, 128 kbit/s
G.726 ADPCM: 8 kHz, 32 or 24 kbps | | Audio Input/Output | 2 x external microphone / line inputs
1 x line output | | | | Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log | | Supported Protocols | IPv4/v6, HTTP, HTTPS, QoS layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS | | | | Application Programming Interface | Open API for software integration, including VAPIX Includes the ONVIF specification Support for AXIS Video Hosting System (AVHS) with One-Click Camera connection | | Intelligent Video | Video motion detection, active tampering alarm | | Alarm Triggers | Audio detection | | Alarm Events | File upload via FTP, HTTP and email Notification via email, HTTP and TCP PTZ preset External output activation Play audio clip Pre- and post-alarm video buffering | | | | Processor & Memory | ARTPEC-4 | | Memory | 128 MB flash | | RAM | 512 MB RAM | | Power | 8-20 VDC, maximum 8 W
Power over Ethernet IEEE 802.3af Class 3, AXIS PS-K power supply | | Connectors | 4 x analog composite video inputs (BNC) 2 x mono microphone or line inputs, 6Vpp maximum (3.5 mm jacks) 1 x mono audio output, 2 Vpp maximum at 1 kOhm (3.5 mm jack) 1 x 10 BASE-T / 100BASE-TX Ethernet 4 x configurable external inputs / outputs (terminal block) 1 x RS-485/422 full duplex (terminal block) 1 x DC input terminal block | | Local Storage | 1 x microSD / microSDHC card slot | | Operating Conditions | Temperature: 32 to 122°F / 0 to 50°C
Humidity: 20 to 80%, non-condensing | | Approvals | EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN61000-6-1, EN61000-6-2 FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, C-tick AS/NZS CISPR 22, KCC Class B UL/IEC/EN 60950-1 | | Dimensions (HxWxD) | 1.5 x 4.3 x 6.8" / 38 x 109 x 172 mm | | Weight | 1.3 lb / 570 g | | | | Package Weight | 2.43 lb | | Box Dimensions (LxWxH) | 9.4 x 8.2 x 3.0" |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 61 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
