User Manual for Axis Communications Q1645 1080p Network Bullet Camera with 3.9-10mm Lens Click to enlarge the picture
Contents of the user manual for the Axis Communications Q1645 1080p Network Bullet
- Product category: Wired IP Cameras Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Wired IP Cameras
|
User manual for the Axis Communications Q1645 1080p Network Bullet contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description The Q1645 1080p Network Bullet Camera from Axis Communications utilizes a 1/2" progressive scan RGB CMOS sensor to capture 1920 x 1080 resolution video at up to 120 fps. A 3.9-10mm varifocal i-CS lens delivers a 109-42° horizontal field of view. The camera uses H.264 and MJPEG compression to maximize storage and bandwidth efficiency, and a memory card slot supports microSD cards for on-site recording and storage. PoE technology provides a network connection and power source in a single Ethernet cable for a clean setup. This camera is ONVIF compliant for a wide variety of applications. - Forensic WDR, Lightfinder, and Zipstream technology
- Electronic image stabilization (EIS)
- Image enhancement includes saturation, contrast, brightness, sharpness, white balance, day/night threshold, exposure mode, exposure zones, and compression
In the Box Axis Communications Q1645 1080p Network Bullet Camera with 3.9-10mm Lens Stand Connector Kit Resistorx T20 Tool Windows Decoder 1-User License Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications Q1645 1080p Network Bullet Camera with 3.9-10mm Lens in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications Q1645 Specs | | | Sensor | 2 MP 1/2" CMOS | | Lens Mount | CS | | Focal Length | 3.9 to 10mm | | Maximum Aperture | f/1.5 | | Zoom | Optical: 2.6x | | Lens Field of View | Horizontal: 109 to 42° Vertical: 58 to 23° | | IR Cut Filter | Mechanical | | Day/Night | Yes | | Minimum Illumination | Color: 0.2 Lux B&W: 0.04 Lux | | Shutter Speed | 1/100,000 to 2 Seconds | | | | Streaming Resolution | 1920 x 1080 at 120 fps | | Supported Video Compression | H.264, MJPEG | | Multi-View Streaming | Yes | | | | Streaming | Two-Way | | Audio Formats | AAC, G.711, G.726, Opus, PCM | | External Audio Input | 3.5 mm | | External Audio Output | 3.5 mm | | | | Security | Centralized Certificate Management, Digest Authentication, HTTPS, IEEE 802.1X, IP Address Filtering, Password Protection, User Access Log | | Supported Protocols | ARP, Bonjour, CIFS/SMB, DHCP, DNS, DynDNS, FTP, HTTP, ICMP, IGMP, IPv4/v6, LLDP, NTP, ONVIF Profile G, ONVIF Profile S, QoS Layer 3 DiffServ, RTCP, RTP, RTSP, SFTP, SMTP, SNMP v1/v2c/v3 (MIB-II), SOCKS, SRTP, SSH, SSL/TLS, TCP, UDP, UPnP | | | | Application Programming Interface (API) | VAPIX and AXIS Camera Application Platform AXIS Video Hosting System | | Analytics | Included AXIS Video Motion Detection AXIS Fence Guard AXIS Motion Guard AXIS Loitering Guard Active Tampering Alarm Audio Detection
Supported AXIS Digital Autotracking AXIS Perimeter Defender AXIS Camera Application Platform for Third-Party Applications | | Event Trigger | Yes | | Event Action | Recording, Notification | | Data Streaming | Yes | | Built-In Installation Aids | i-CS Lens: Remote Zoom and Focus Other Lens: Remote Back Focus Traffic Wizard Pixel Counter Levelling Assistant Autorotation | | | | Memory | 1 GB RAM / 512 MB Flash | | Recording Media | microSD (Up to 512 GB) | | Pan/Tilt | None | | I/O Connections | 1 x RJ45 1 x 6-Pin Terminal Block 1 x 9-Pin Serial (RS-485) 1 x i-CS | | Video Management Software | AXIS Companion AXIS Camera Station VMS from Axis' Application Development Partners | | Supported Languages | English French German Italian Japanese Korean Portuguese Russian Simplified Chinese Spanish Traditional Chinese | | Internal Storage | None | | External Storage Options | NAS | | Power Source | DC, PoE 802.3af (15 W), PoE 802.3at (30 W) | | Power Consumption | PoE: 4.5 W DC: 4.3 W | | Material of Construction | Zinc | | Operating Temperature | -4 to 140°F / -20 to 60°C | | Storage Temperature | -40 to 149°F / -40 to 65°C | | Operating Humidity | 10 to 85% | | Dimensions | H: 3.2 x W: 2.6 x L: 8.3" / H: 82.0 x W: 66.0 x L: 210.0 mm | | Weight | 2.1 lb / 950 g |
Rating90% users recommend this product to others. And what about you?

This product has already been rated by 43 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|