User Manual for Axis Communications Q6000-E Mk II Outdoor PTZ Network 360° Panoramic Camera with 4 2MP Sensors Click to enlarge the picture
Contents of the user manual for the Axis Communications Q6000-E Mk II Outdoor
- Product category: Wired IP Cameras Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Wired IP Cameras
|
User manual for the Axis Communications Q6000-E Mk II Outdoor contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description The Q6000-E Mk II Outdoor PTZ Network 360° Panoramic Camera with 4 2MP Sensors from Axis Communications features four 2MP sensors with 1.37mm lenses that capture a combined 360° view in 720p at up to 30 fps. In addition, the Q6000-E is intended to accept an Axis Q60-E series PTZ camera (available separately) on the bottom for a complete surveillance solution. Without a PTZ camera or cover attached, some of the interior electronics will be exposed. With a Q60-E series camera installed, the entire camera is IP66- and NEMA 4X-rated for use outdoors. - Designed to provide a 360° view of large outdoor areas
- Requires Axis Q60-E PTZ camera or bottom cover to be installed on the bottom (both available separately)
- Four individually adjustable 2MP sensors with 1.37mm lenses capture 720p video at up to 30 fps
- IP66- and NEMA 4X-rated dome
- SD card slot for local storage
- RJ45 Ethernet connection with PoE
In the Box Axis Communications Q6000-E Mk II Outdoor PTZ Network 360° Panoramic Camera with 4 2MP Sensors Ethernet Adapter Bayonet Screws Windows Decoder 1-User License Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications Q6000-E Mk II Outdoor PTZ Network 360° Panoramic Camera with 4 2MP Sensors in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications 01006-001 Specs | | | Image Sensor | 4 x 2 MP 1/2.8" progressive scan RGB CMOS sensors | | Lens | 4 x 1.37mm fixed focus, fixed iris, f/2.0 | | Field of View | Horizontal Default Mode (4:3): 113°
Horizontal (16:9): 152°
Vertical (4:3 and 16:9): 85° | | Light Sensitivity | Color: 0.3 lux, f/2.0 | | Shutter Time | 1/45,500 to 4 sec | | Pan/Tilt/Zoom | Remote Gatekeeper, one-click PTZ control (with original lenses only) | | | | Video Compression | H.264 (MPEG-4 Part 10/AVC) baseline, main, and high-profile
MJPEG | | Resolutions | 4 x 720p (1280 x 720) to 320 x 180 (1920 x 1440 to 320 x 180 with optional 6 or 16mm lenses, available separately)
Default: 960 x 720
Quad View: 1920 x 1440 (4:3) to 320 x 180 | | Frame Rate | Up to 30 fps | | Video Streaming | Multiple, individually configurable streams in H.264 and MJPEG
Axis' Zipstream technology in H.264
Controllable frame rate and bandwidth
MBR H.264 | | Image Settings | Resolution, compression, color level, brightness, sharpness, contrast, white balance, exposure value, exposure control, automatic backlight compensation, exposure zones, shutter and gain fine tuning of behavior at normal and low light, privacy masks (maximum 4 per channel) | | | | Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log, Centralized Certificate Management | | Supported Protocols | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH | | | | Application Programming Interface | Open API for software integration, including VAPIX and Axis Camera Application Platform, Axis video hosting system (AVHS) with one-click camera connection, ONVIF Profile S and G | | Analytics | Video motion detection, active tampering alarm, edge storage events, shock detection
Support for Axis Camera Application Platform enabling installation of third-party applications | | Event Trigger | Detectors: Live stream accessed, shock detection, tampering
Hardware: Fan, network, temperature
Input Signal: Manual trigger, virtual input
Storage: Disruption, recording
System: System ready
Time | | Event Action | File upload via FTP, HTTP, HTTPS, network share, and email
Notification via email, HTTP, HTTPS, and TCP
Video recording to edge storage
Pre- and post-alarm video buffering
Overlay text | | Data Streaming | Event data | | Built-In Installation Aids | Pixel counter | | | | Casing | IP66- and NEMA 4X-rated, die-casted aluminum, polycarbonate dome | | Memory | 1 GB RAM, 256 MB Flash | | Power Consumption | Typical: 8 W
Maximum: 18 W | | Connectors | RJ45 10Base-T/100Base-TX/1000Base-T PoE
RJ45 10Base-T/100Base-TX Q60-E port
RJ45 10Base-T/100Base-TX Service port | | Edge Storage | SD/SDHC/SDXC slot
Support for recording to dedicated network-attached storage (NAS) | | Operating Temperature | -22 to 122°F (-30 to 50°C) | | Operating Humidity | 10 to 100% RH (non-condensing) | | Storage Temperature | -40 to 149°F (-40 to 65°C) | | Approvals | EMC: EN 55032 Class A, EN 55024, IEC 62236-4, EN 61000-6-1, EN 61000-6-2, EN 61000-3-2, EN 61000-3-3, EN 50121-4, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, ITE, RCM AS/NZS CISPR 22 Class A, KCC KN22 Class A, KN24
Safety: IEC/EN/UL 60950-1, IEC/EN/UL 60950-22
Environment: EN 50581, IEC/EN 60529 IP66, IEC/EN 62262 IK10, NEMA 250 Type 4X, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-27, IEC 60721-4-3 Class 4K3, 4M3 | | Dimensions | 15.3 x 12" (39 x 31 cm) | | Weight | 7.8 lb (3.55 kg) | | | | Package Weight | 11.95 lb | | Box Dimensions (LxWxH) | 18.4 x 18.2 x 11.9" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 54 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
