User Manual for Axis Communications Q7401 Video Encoder Click to enlarge the picture
Contents of the user manual for the Axis Communications Q7401 Video Encoder
- Product category: Video Encoders & Decoders Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Video Encoders & Decoders
|
User manual for the Axis Communications Q7401 Video Encoder contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description The Axis Communications Q7401 Video Encoder (Barebone, Single Channel) with H.264 video compression format offers optimized bandwidth and storage efficiency by reducing the bit rate without hampering the image quality. MJPEG format is also supported for enhanced flexibility. Delivering multiple H.264 streams, it individually configures the video streams with a resolution up to 720 x 480 NTSC D1 / 720 x 576 PAL D1. With the image setting adjustments, you can improve the image quality before the image encoding takes place.
Tamper Detection allows the encoder to detect and respond when it is redirected, blocked, defocused, or spray-printed; hence it is suitable for tamper-prone places such as transportation stations and prisons. Other intelligent video capabilities include video motion detection and audio detection where the Q7401 Video Encoder’s inputs and outputs connect to the sensors and devices and enable the system to retort to alarms and activate lights. When used with the Axis Camera Station, the encoder allows for event search, live image viewing, log files and configuration check, as well as remote connections.
The Q7401 Video Encoder supports Power over Ethernet (IEEE802.3af) that supplies power to the camera from the network itself without any extra wiring for auxiliary power outlets. Two-way audio support allows you to communicate with visitors or potential intruders from the operator’s base station with a built-in microphone. With full duplex audio streaming, voices can be transmitted in both directions at the same time. The SD/SDHC memory card slot provides for on-board storage.
Supporting the Axis Video Hosting System (AVHS) software with a 1-click camera connection, the Q7401 Video Encoder can create a service provider-specific portal for managing video monitoring over the network. Management is centralized; therefore on-site maintenance is not necessary. It can be connected to the video service portal via any internet based PC, laptops or mobile phones to watch live videos.
VAPIX is an API (Application Programming Interface) created by Axis for cost efficiency, flexibility, scalability, and integration with other systems. The encoder supports HTTPS (Hyper Text Transfer Protocol over SSL), which protects streaming data transmission across the network. With support for ONVIF, the device easily integrates with other ONVIF-conformant network video products. - H.264/MJPEG video compression format
- Offers optimized bandwidth and storage efficiency by reducing the bit rate without hampering the image quality
- Individually configures the video streams with a resolution up to 720 x 480 NTSC D1 / 720 x 576 PAL D1
- With the image setting adjustments, you can improve the image quality before the image encoding takes place
- Integration with a wide range of analog PTZ cameras, including software drivers for more than 25 analog cameras
- Tamper Detection - detects and responds when it is redirected, blocked, defocused, or spray-printed
- Other intelligent video capabilities include video motion detection and audio detection
- Connection of the encoder's inputs and outputs to the sensors and devices enables the system to retort to alarms and activate lights
- Installation of the Axis Camera Station with the encoder helps you in event search, live image viewing, log files and configuration check, as well as remote connections
- Power over Ethernet (IEEE802.3af) supplies power to the camera from the network itself without any extra wiring for auxiliary power outlets
- 2-way audio - allows you to communicate with visitors or potential intruders from the operator's base station with a built-in microphone
- Full duplex - Voices can be transmitted in both directions at the same time
- SD/SDHC memory card slot provides for on-board storage
- Supports Axis Video Hosting System (AVHS) software with a 1-click camera connection
- Management is centralized; therefore on-site maintenance is not necessary
- Can be connected to the video service portal via any internet based PC, laptops or mobile phones to watch live videos
- VAPIX is an API (Application Programming Interface) created by Axis for cost efficiency, flexibility, scalability and integration with other systems
- Supports HTTPS (Hyper Text Transfer Protocol over SSL), which protects streaming data transmission across the network
- Password protection - supports multi-level password protection and allows only those operators to access the camera who have a user name and user password
- IP address filtering restricts system-access and system-control to selected users
- Supports ONVIF - easily integrates with other ONVIF-conformant network video products
In the Box Axis Communications Q7401 Video Encoder (Barebone, Single Channel) Power Supply Mounting and Connector Kits Installation Guide CD with Installation and Management Tools Software and User's Manual 1 Windows Decoder User License 3-year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications Q7401 Video Encoder in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications Q7401 Specs | Form Factor | External | | Functions | Video Encoding, Video Compression, Video Streaming, Audio Capturing, Video Capturing | | Model | Q7401 | | Resolution | 720 x 480 NTSC D1
720 x 576 PAL D1 | | Interfaces/Ports | 1 x BNC Composite Video In
1 x RJ-45 Network
1 x Mini-phone Audio In
1 x Mini-phone Audio Out
RS-422/485 Serial | | Frame Rate | 30 Frames Per Second NTSC
25 Frames Per Second PAL | | Video Formats | H.264, MPEG-4, Composite Video | | Video Features | Image setting adjustment
Pan, tilt, zoom
Mirroring of images
Text and image overlay
Compression, color, brightness, contrast
Rotation: 90, 180, 270 | | Additional Information | Supported Protocols: IPv4/v6, HTTP, HTTPS, QoS layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB- II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS | | | | Package Weight | 0.88 lb | | Box Dimensions (LxWxH) | 9.5 x 6.4 x 3.3" |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 83 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
