User Manual for Axis Communications Q7411 1-Channel Video Encoder Click to enlarge the picture
Contents of the user manual for the Axis Communications Q7411 1-Channel Video Encoder
- Product category: Video Encoders & Decoders Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Video Encoders & Decoders
|
User manual for the Axis Communications Q7411 1-Channel Video Encoder contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description Bring your analog cameras into the digital age with the Q7411 1-Channel Video Encoder from Axis Communications, available here as a pack of 10 units. It is a fully-featured solution offering H.264 and MJPEG compression for D1 resolutions up to a fast 60 fps. This speedy frame rate guarantees smooth, clear videos in scene with a lot of motion as well as monitor minute changes and details. The device supports multiple streams with independent settings for each and has an RS-485/422 port for PTZ camera control. This model also extends camera control to its coaxial connection, which is compatible with Coaxitron by Pelco.
For intelligent video features the Q7411 has video motion detection and a tampering alarm, as well as audio detection thanks to inputs and outputs that support two-way audio communication. Along with this it has a microSD card slot and NAS support for edge storage and an RJ-45 Ethernet port for networking. Additionally, it has support for 802.3 PoE and it is ONVIF compliant. In the Box Axis Communications Q7411 1-Channel Video Encoder (10 Pack) 10 x Mounting & Connector Kits 10 x Windows Decoder 1-User Licenses Installation & Management Software CD-ROM Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications Q7411 1-Channel Video Encoder in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications Q7411 Specs | Video Compression | H.264 (MPEG-4 Part 10/AVC) Baseline and Main profile
Motion JPEG | | Resolutions | 176 x 120 to 720 x 576 | | Frame Rate | 60 fps in all resolutions | | Video Streaming | Multiple, individually configurable streams in H.264 and Motion JPEG
Controllable frame rate and bandwidth, VBR/CBR H.264 | | Pan/Tilt/Zoom | Wide range of analog PTZ cameras supported
100 presets / camera, guard tour, PTZ control queue
Supports Windows compatible joysticks | | Image Settings | Compression, color, brightness, contrast
Rotation: 90°, 180°, 270°
Aspect ratio correction, mirroring of images, text and image overlay, privacy mask, enhanced de-interlace filter, video termination, anti-aliasing, temporal noise filtering | | | | Audio Streaming | Two-way, full duplex and half duplex | | Audio Compression | AAC-LC 8 / 16 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz Configurable bit rate | | Audio Input / Output | 1 x 3.5mm microphone or line input
1 x 3.5mm line output | | | | Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log | | Supported Protocols | IPv4/v6, HTTP, HTTPS, QoS layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS | | | | Application Programming Interface | Open API for software integration, including VAPIX and AXIS Camera Application
Platform from Axis Communications
ONVIF
AXIS Video Hosting System (AVHS) with One-Click Camera Connection | | Intelligent Video | Video motion detection, active tampering alarm
AXIS Camera Application Platform enabling installation of additional applications | | Event Trigger | Intelligent video, external inputs, video loss, audio detection | | Event Action | File Upload: FTP, HTTP, network share and email
Notification: email, HTTP and TCP
PTZ preset
External output activation
Play audio clip
Video and audio recording to edge storage
Pre- and post-alarm video buffering
Status LED | | Data Streaming | Event data | | | | Casing | Aluminum | | Memory | 128 MB flash | | RAM | 256 MB | | Power | Power over Ethernet IEEE 802.3af Class 2
8 to 28 VDC input, maximum 5.3 W | | Connectors | 1 x Analog composite video BNC input
1 x RJ-45 10BASE-T/100BASE-TX PoE
1 x Terminal block for four configurable external inputs/outputs
1 x Terminal block for RS-485/422 (full duplex)
1 x 3.5 mm jack for microphone or line input (mono)
1 x 3.5 mm jack for audio output (mono) | | Edge Storage | 1 x microSD/SDHC/SDXC memory card slot (supports cards up to 64 GB)
Support for recording to network share (NAS or file server) | | Operating Conditions | Temperature: 32 to 140°F / 0 to 60°C
Temperature with Power Supply: 32 to 122°F / 0 to 50°C
Humidity: 10 to 85%, non-condensing | | Approvals | EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 50121-4, EN61000-6-1, EN61000-6-2, EN60950-1, FCC Part 15 Subpart B ITE Class B, ICES-003 Class B, VCCI Class B ITE, C-tick AS/NZS CISPR 22, KN22, KN 24, KCC Class B, UL/IEC/EN 60950-1 | | Dimensions | 6.8 x 4.3 x 1.5" / 172 x 109 x 37 mm | | Weight | 1.1 lb / 520 g |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 97 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
