User Manual for Axis Communications Q7424-R Mk II 4-Channel Video Encoder Click to enlarge the picture
Contents of the user manual for the Axis Communications Q7424-R Mk II 4-Channel
- Product category: Video Encoders & Decoders Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Video Encoders & Decoders
|
User manual for the Axis Communications Q7424-R Mk II 4-Channel contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description Rugged and standalone, the Q7424-R Mk II 4-Channel Video Encoder from Axis Communications, available here as a pack of 10 units,, is a flexible solution for migration of analog cameras into an IP-based surveillance system. It is designed to work in difficult conditions and operates in a wide temperature range of -40 to 167°F. Also, for video it offer H.264 and MJPEG compression at D1 resolutions up to 30 fps. Along with this it has four video channels, PTZ camera control for each channel, and a Quad View capability. And, in addition to the RJ-45 Ethernet port for networking it has an SFP slot for fiber connections, allowing for efficient, cost-effective wiring over long distances.
Intelligent video features built into the unit include numerous event management tools, including a tampering alarm, motion detection, and audio detection, as well as AXIS Camera Application platform applications. The device also has support for 802.3af/at PoE for simple installations and it features an SD card slot as well as NAS support for edge storage. Additionally, it is ONVIF compliant. In the Box Axis Communications Q7424-R Mk II 4-Channel Video Encoder (10-Pack) 10 x Installation and Management Software CD 40 x Windows Decoder User License Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications Q7424-R Mk II 4-Channel Video Encoder in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications 0742-021 Specs | | | Video Compression | H.264 (MPEG-4 Part 10/AVC) Baseline Profile (BP) and Main Profile (MP)
MJPEG | | Resolution | Single View: 176 x 120 to 720 x 576
Quad View: 176 x 120 to 1536 x 1152 | | Frame Rate | Single View: 25/30 fps (PAL/NTSC) (50/60 Hz)
Quad View: 15 fps in full resolution | | Video Streaming | Multi-stream H.264 and Motion JPEG: 1 H.264 and 1 JPEG stream on each channel (8 streams in total) in full frame rate individually configured streams in maximum resolution at 25/30 fps
More streams if identical or limited in frame rate/resolution
Controllable frame rate and bandwidth VBR/CBR H.264 | | Pan/Tilt/Zoom | Wide range of analog PTZ cameras supported 100 presets/camera, guard tour, PTZ control queue Supports Windows compatible joysticks | | Image Settings | Compression, Color, Brightness, Contrast, Aspect ratio correction, Mirroring of images, Text and image overlay, Privacy mask, Enhanced deinterlace filter, Video termination, Anti-aliasing, Temporal noise filtering
Rotation: 90°, 180°, 270° | | | | Audio Streaming | Two-way | | Audio Compression | AAC-LC 8/16 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz configurable bit rate | | Audio Input/Output | 1 x Terminal block for mono microphone or line input
1 x Terminal block for mono line output | | | | IP Addresses | 1 x IP address for 4 channels | | Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log | | Supported Protocols | IPv4/v6, HTTP, HTTPS, QoS layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS | | | | Application Programming Interface | Open API for software integration, including VAPIX and AXIS Camera Application Platform Axis Video Hosting System (AVHS) with One-Click Camera Connection
ONVIF Profile S | | Intelligent Video | Video motion detection, Active tampering alarm, Audio detection, Axis Camera Application Platform (on one channel) | | Event Detection | Intelligent video, external inputs, video loss | | Alarm Actions | File Upload: FTP, HTTP and email
Notification: Email, HTTP and TCP video and audio recording to edge storage, pre- and post-alarm video buffering, PTZ preset, external output activation | | Data Streaming | Event data | | | | Casing | Aluminum | | Memory | 128 MB flash | | RAM | 512 MB | | Power Requirements | 8 to 28 VDC, maximum 10 W; 20 to 24 VAC, maximum 15.6 VA
Power over Ethernet IEEE 802.3af/802.3at Type 1 Class 3 | | Connectors | 4 x Analog composite video BNC inputs
1 x Terminal block for mono microphone or line input, 6 Vpp maximum
1 x Terminal block for mono audio output, 2 Vpp maximum at 1 kOhm
1 x RJ-45 10BASE-T/100BASE-TX PoE
1 x Terminal block for four configurable external inputs/outputs
1 x Terminal block for RS485/RS422 (full duplex)
1 x AC/DC input terminal block
1 x 100/1000 Mbps SFP slot | | Edge Storage | SD/SDHC/SDXC slot supporting memory cards up to 64 GB
Support for recording to dedicated network-attached storage (NAS) | | Operating Conditions | Temperature: -40 to 167°F / -40 to 75°C
Humidity: 10 to 95%, non-condensing | | Approvals | EN 55022 Class B, EN 50121-4, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, C-tick AS/NZS CISPR 22, KCC KN22 Class B, KN24, IEC/EN/UL 60950-1, EN 50155 (Vibration and Shock Category 1 Class B, Temperature Class TX), NEMA TS 2 (vibration, shock, temperature, humidity), IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-27, IEC 60068-2-30, IEC 60068-2-64, IEC 60068-2-78, CEN/TS 45545-2 | | Dimensions | 1.8 x 5.3 x 6.6" / 4.5 x 13.5 x 16.7 cm | | Weight | 1.7 lb / 0.8 kg |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 72 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
