User Manual for Axis Communications VB-H652LVE 2.1MP Outdoor Network Dome Camera with Night Vision Click to enlarge the picture
Contents of the user manual for the Axis Communications VB-H652LVE 2.1MP Outdoor Network
- Product category: Wired IP Cameras Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Wired IP Cameras
|
User manual for the Axis Communications VB-H652LVE 2.1MP Outdoor Network contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description The VB-H652LVE 2.1MP Outdoor Network Dome Camera with Night Vision from Axis Communications is suitable for monitoring outdoor environments in a variety of climates, as it has an IP66-rated water-tight housing, is resistant to impacts (IK10-rated), includes tamper-proof screws, and also offers an optional heater unit (available separately). For added protection from the elements, its anti-fog airflow design allows for the circulation of air to prevent the dome from fogging up and blocking the field of view. The camera is also NEMA250 Type 4X certified allowing it to be installed near salt water or in colder areas that may be prone to frost. In addition to its lens, 2.1MP (1920 x 1080) high-sensitivity CMOS image sensor, and DIGIC DV III Image Processor – three core elements that allow for crisp images with remarkable color accuracy, even in low light environments – this camera also features four built-in IR illuminators for obtaining clear video throughout its entire field of view (wide angle to telephoto), even in pitch darkness. The camera features a 122.1° wide angle of view and an auto-focus lens that can automatically adjust its focus for subjects both near and far, helping to give a clear image despite varying distances between the camera and subject matter. An image stabilization feature also helps ensure that the camera can deliver clear video with minimal motion blurring even when installed in areas with frequent vibrations, such as on top of a pole or near heavy machinery. An analog video output can be connected to a monitor during installation of this camera to enable the installer to receive immediate feedback on the camera's field of view and focus. With multiple power options, including AC, DC, PoE, and PoE+, and the fact that it uses a mere 8.4W of power when using PoE, this camera offers installation flexibility while lowering overall system power requirements. -
- IP66-Rated and NEMA250 Type 4X Certified
- Vandal-resistant enclosure is IK10-rated for impact resistance with tamper-proof screws
- Built-in infrared illuminators for surveillance in 0 Lux
- Lens with auto-focus and 122.1° angle of view
- Image stabilization
- 2.1MP High-Sensitivity CMOS Sensor with low-light performance
- Advanced DIGIC DV III image processor to help maximize image quality
- Analog video output for simplified installation
- Haze compensation, smart shade control and auto gain control limit
- Scheduled custom video settings
- Onboard video analytics and versatile functions
- Camera viewer and a mobile viewer for access to camera features and functionality from different compatible devices (PCs, mobile phones, tablets)
- Motion Adaptive Noise Reduction and Area-Specific Data Size Reduction (ADSR) help to maintain video quality in important areas while reducing bandwidth usage
- Powerful DIGIC NET II processor allows for simultaneous streaming of MJPEG and H.264 in multiple resolutions (16:9 and 4:3)
- Multiple networking configuration, security, and encryption functions
- Audio and I/O support
- Built-in microSD card slot
- Can be powered via 24 VAC, 12 VDC, PoE, and PoE+
- PoE power consumption 8.4W
- Camera Management Tool (CCMT)
- ONVIF Profile S & Profile G conformant
In the Box Axis Communications VB-H652LVE 2.1MP Outdoor Network Dome Camera with Night Vision Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications VB-H652LVE 2.1MP Outdoor Network Dome Camera with Night Vision in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications VB-H652LVE Specs | | | Image Sensor | 1/3" type CMOS (RGB) | | Number of Effective Pixels | Approximately 2.1 MP | | Scanning Method | Progressive | | Zoom | 2.4x optical zoom lens with auto focus (4x digital) | | Focal Length | 2.55-6.12mm | | F Number | f/1.2 to f/1.8 | | Viewing Angle | Horizontal: 122.1 to 50.1°
Vertical: 65.9 to 28.1° | | Day/Night Switching | Auto / manual | | Minimum Subject Illumination | Day Mode (Color):
0.035 lux: f/1.2, shutter speed 1/30 sec, when smart shade control is off, 50 IRE
0 lux: f/1.2, shutter speed 1/2 sec, when smart shade control is off, 50 IRE with IR light on
Night Mode (Monochrome):
0.002 lux: f/1.2, shutter speed 1/30 sec, when smart shade control is off, 50 IRE | | Focus | Auto / One-shot AF / Manual / Fixed at infinity | | Shooting Distance Range | Day Mode: 12" to infinity / 0.3 m to infinity
Night Mode: 12' to infinity / 0.3 m to infinity | | Shutter Speed | 1/16,000 to 1 sec | | Exposure | Auto / auto (flickerless) / auto (shutter-priority AE) / auto (aperture-priority AE) / manual (shutter speed, aperture, gain) | | White Balance | Auto/ light source (daylight fluorescent / white fluorescent / warm fluorescent / mercury lamp / sodium lamp / halogen lamp) / manual (one-shot WB, R Gain, B Gain) | | Metering Modes | Center-weighted / average / spot | | Exposure Compensation | 9 levels | | Smart Shade Control | Auto (3 levels) / Manual (7 levels) / Disable | | AGC (Automatic Gain Control) | 6 levels | | | | Video Compression Format | MJPEG & H.264 | | Video File Size | JPEG, H.264: 1920 x 1080, 960 x 540, 480 x 270, 1280 x 720, 640 x 360, 320 x 180, 1280 x 960, 640 x 480, 320 x 240 | | Video Quality | JPEG, H.264: 10 levels | | Frame Rate | JPEG: 0.1 to 30 fps
H.264: 1/2/3/5/6/10/15/30 fps | | Maximum Frame Rate | 1920 x 1080: 30 fps | | Area-Specific Data Size Reduction | Number of Specified Areas: Maximum 8 windows | | I-Frame Interval | 0.5/1/1.5/2/3/4/5 sec | | Simultaneous Client Access | Maximum 30 clients and 1 admin client
H.264 maximum 10 clients | | Camera Control | Administrator, authorized user, guest user (level of control varies depending on user) | | Access Control | User authority (user name and password)
Host access restrictions (IPv4, IPv6) | | Encrypted Communications | SSL/TLS, IPsec | | IEEE 802.1X | EAP-MD5, EAP-TLS, EAP-TTLS, EAP-PEAP | | ONVIF | Profile S, Profile G | | Protocols | IPv4: TCP/IP, UDP, HTTP, FTP, SNMPv1/v2c/v3 (MIB2), DHCP, DNS, AutoIP, mDNS, ARP, ICMP, POP3, NTP, SMTP, RTP/RTCP, RTSP, SSL/TLS, IPsec, ONVIF, WV-HTTP (proprietary)
IPv6: TCP/IP, UDP, HTTP, FTP, SNMPv1/v2c/v3 (MIB2), DHCP, DNS, AutoIP, mDNS, ARP, ICMP, POP3, NTP, SMTP, RTP/RTCP, RTSP, SSL/TLS, IPsec, ONVIF, WV-HTTP (proprietary) | | Auto IP (Link-Local) | Yes | | Audio Compression Method | G.711 µ-law (64 kb/s) | | Audio Communication | Full-duplex (2-way), echo cancellation function compliant RTP
Sound transfer protocol
Audio file playback (audio files can be played back when an event is triggered by the intelligent function or external device input) | | Privacy Masking | Number of Registration: Maximum 8 places
Number of mask colors: 1 (select from 9 colors)
View Restriction: Yes | | Preset | Maximum 20 positions (and Home position)
Number of Preset Tour Routes: Maximum 1 | | Intelligent Function | Video Detection Types: Object detection, abandoned object detection, removed object detection, camera tampering detection, passing detection, and intrusion detection
Audio Settings: Volume detection and scream detection
Intelligent Detection Settings: Maximum 15 | | Event Trigger Type | External device input, intelligent function (video), intelligent function (audio), timer, day/night switch | | Image Upload | FTP/HTTP/SMTP (email) | | Event Notification | HTTP/SMTP (email) | | Image Crop | Digital PTZ Cropping Sizes: 640 x 360, 512 x 288, 384 x 216, 256 x 144, 128 x 72, 640 x 480, 512 x 384, 384 x 288, 256 x 192, 128 x 96 | | IP | Auto | | Other | On-screen display, daylight saving time, and custom settings available | | | | Network Terminal | 1 x LAN (RJ45, 100Base-TX) (auto / full-duplex / half-duplex) | | Audio Input Terminals | 1 x mini-jack connector (mono), line in or mic in | | Audio Output Terminals | 1 x mini-jack connector (mono), line out | | External Device I/O Terminals | 2 x inputs
2 x outputs
1 x analog video output | | Memory Card | microSD, microSDHC, microSDXC memory card compatible
Frame Rate: Maximum 1 fps (JPEG), 30 fps (H.264)
Record Content: Log, video (event, manual, ONVIF, timer, upload) | | | | Temperature | Operating: AC, DC, PoE+, PoE: 14 to 131°F (/ -10 to 55°C
Storage: 22 to 140°F / -30 to 60°C | | Humidity | Operating: 5 to 85% (without condensation)
Storage: 5 to 90% (without condensation) | | | | PoE | PoE power supply via LAN Connector (IEEE 802.3af-compliant)
AC Adapter: PA-V18 (100 to 240 VAC) (sold separately) | | External Power | 24 VAC / 12 VDC | | Power Consumption | PoE: 12.4 W
AC Adapter PA-V18: 15.2 W maximum (100 to 240 VAC) (approximately) (sold separately),
12 VDC: 13.8 W
24 VAC: 12.7 W
PoE+: 12.4 W | | | | Rating | IP: IP66
Impact Resistance: IK10 (20J) | | Dimensions (Ø x H) | 7.09 x 5.71" / 180 x 145 mm | | Weight | 4.08 lb / 1.85 kg |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 31 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
