User Manual for Axis Communications VB-M50B 1.3MP PTZ Network Camera Click to enlarge the picture
Contents of the user manual for the Axis Communications VB-M50B 1.3MP PTZ Network
- Product category: Wired IP Cameras Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Wired IP Cameras
|
User manual for the Axis Communications VB-M50B 1.3MP PTZ Network contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description The VB-M50B 1.3MP PTZ Network Camera from Canon features a 1.3MP 1/3" progressive scan RGB CMOS sensor to capture 1280 x 960 resolution video at up to 30 fps. This camera is equipped with a 17.7-88.5mm varifocal lens, which provides a 5x optical zoom and a 15.6-3.2° horizontal field of view. The camera offers a pan, tilt, and zoom mechanism with the ability to set up to 64 preset positions and schedule up to five preset tour routes, eliminating the need for repeated manual adjustment of the PTZ positions.
Clear IR Mode activates an infrared bandpass filter that allows only infrared light to pass through to the image sensor to help capture high-quality images in even challenging environments. Auto Gain Control allows users to determine the fine balance of video brightness and low noise, while haze compensation automatically enhances contrast and maximizes image quality when fog, haze, or smog are present. In addition, the camera features video analytics including moving object detection and removed and abandoned object detection.
With the CCMT (Canon Camera Management Tool), users can configure and manage Canon Network Cameras from a single screen. Configuration is also simplified via ONVIF Profile S and G for maximum interoperability with many video management software (VMS) solutions. Additionally, the camera's bit rate stabilization feature can assure a more reliable connection by automatically suppressing bandwidth spikes when transmitting over a cellular data network. - Advanced Lens with large aperture ratio range of f/1.8 (W) to f/2.4 (T) and focal length range of 17.7 to 88.5mm
- 1.3MP 1/3" progressive scan RGB CMOS sensor captures 1280 x 720 resolution video at up to 30 fps
- 17.7-88.5mm varifocal lens has a 15.6-3.2° horizontal field of view
- DIGIC DV III image processor
- Pan, tilt, and zoom functionality
- 64 preset camera positions with 5 preset tour routes
- Camera viewer provides easy access to the camera's features and functionality from different devices including computers, and iOS and Android devices
- Clear IR mode with infrared bandpass filter
- Motion adaptive noise reduction and ADSR (Area-Specific Data Size Reduction) to maintain video quality in important areas while reducing bandwidth usage
- Camera viewer with mobile device support
- 12 and 24 VDC or PoE (Power over Ethernet) powered
- ONVIF Profile S and G compliant
UPC: 013803275353 In the Box Axis Communications VB-M50B 1.3MP PTZ Network Camera L-Shaped Power Connector Straight Power Connector Software CD Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications VB-M50B 1.3MP PTZ Network Camera in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications VB-M50B Specs | | | Image Sensor | 1.3 MP 1/3" progressive scan RGB CMOS sensor | | Lens | 5x optical zoom lens with auto focus | | Focal Length | 17.7-88.5mm | | Aperture | f/1.8-2.4 | | Digital Zoom | 20x | | Field of View | Horizontal: 15.6-3.2°
Vertical: 8.8-1.8° | | IR Cut Filter | Automatically removable | | Minimum Illumination | Day (Color): 0.4 lux (f/1.8, shutter speed 1/30 s, smart shade control is off, and 50 IRE)
Night (Monochrome): 0.02 lux (f/1.8, shutter speed 1/30 s, smart shade control is off, and 50 IRE) | | Focus | Auto / one-shot AF / manual / fixed at infinity | | Shooting Distance Range | Day Mode: 9.8' (3 m) to infinity (wide), 5' (16.4 m) to infinity (tele)
Night Mode: 9.8' (3 m) to infinity (wide), 5' (16.4 m) to infinity (tele) | | Shutter Speed | 1 to 1/16000 s | | Exposure | Auto / auto (flickerless) / auto (shutter-priority AE) / auto (aperture-priority AE) / manual (shutter speed, aperture, gain) | | White Balance | Auto / light source (daylight fluorescent / white fluorescent / warm fluorescent / mercury lamp / sodium lamp / halogen lamp) / manual (one-shot WB/R gain / B gain) | | Metering Modes | Center-weighted / average / spot | | Exposure Compensation | 9 levels | | Smart Shade Control | Auto / manual / disable
Auto: 3 levels
Manual: 7 levels | | AGC (Automatic Gain Control) | Limit: 6 levels | | Image Stabilizer | 2 levels (digital) | | Pan Angle | 348° (±174°) | | Tilt Angle | 105° (ceiling-mounted position: -90 to 15°) | | Moving Speed | Pan: 300°/s maximum
Tilt: 300°/s maximum | | | | Video Compression Format | H.264 and MJPEG | | Bit Rate Control | Target Bit Rate: 64 to 16384 kb/s | | Video Resolution | H.264, MJPEG: 1280 x 960, 1280 x 720, 640 x 480, 640 x 360, 320 x 240, and 320 x 180 | | Video Quality | H.264, MJPEG: 10 levels | | Frame Rate | H.264: 1, 2, 3, 5, 6, 10, 15, 30 fps
MJPEG: 0.1 to 30 fps | | Area-Specific Data Size Reduction | Number of Specified Areas: Maximum 8 areas
Data Size Reduction Level: 3 levels | | I-Frame Interval | 0.5 / 1 / 1.5 / 2 / 3 / 4 / 5 s | | Simultaneous Client Access | Maximum 30 clients plus 1 admin client; H.264: Maximum 10 clients | | Camera Control | Administrator, authorized user, guest user (level of control varies depending on user) | | Access Control | User authority (user name and password), Host Access Restrictions (IPv4, IPv6) | | Encrypted Communications | SSL/TLS, IPsec | | IEEE 802.1X | EAP-MD5, EAP-TLS, EAP-TTLS, EAP-PEAP | | ONVIF | Profile S and G | | Protocol | IPv4: TCP/IP, UDP, HTTP, FTP, SNMPv1/v2c/v3 (MIB2), DHCP, DNS, AutoIP, mDNS, ARP, ICMP, POP3, NTP, SMTP, RTP/RTCP, RTSP, SSL/TLS, IPsec, ONVIF, WV-HTTP (Canon proprietary)
IPv6: TCP/IP, UDP, HTTP, FTP, SNMPv1/v2c/v3 (MIB2), DHCP, DNS, AutoIP, mDNS, ARP, ICMP, POP3, NTP, SMTP, RTP/RTCP, RTSP, SSL/TLS, IPsec, ONVIF, WV-HTTP (Canon proprietary) | | Audio Compression Method | G.711 μ-law (64 kb/s) | | Audio Communication | Full-Duplex (Two-Way): Echo cancellation function compliant
RTP, sound transfer protocol by Canon | | Playback | Audio File: Available (audio files can be played back when an event is triggered by intelligent function or external device input) | | Privacy Masking | Number of Registration: Maximum 8 places
Number of Mask Colors: 1 (select from 9 colors) | | View Restriction | Supported | | Presets | Number of Registers: Maximum 64 positions (and home position) Number of Preset Tour Route: Maximum 5 | | Intelligent Function | Video: Moving object detection, abandoned object detection, removed object detection, camera tampering detection, passing detection, and intrusion detection
Audio: Volume and scream detection
Detection: Maximum 15 | | Event Trigger Type | External device input, intelligent function (video), intelligent function (audio), timer, and day/night switch | | Image Upload | FTP / HTTP / SMTP (email) | | Event Notification | HTTP/SMTP (email) | | Image Crop | Digital PTZ
Cropping Sizes: 640 x 360 / 512 x 288 / 384 x 216 / 256 x 144 / 128 x 72 / 640 x 480 / 512 x 384 / 384 x 288 / 256 x 192 / 128 x 96 | | Other Features | On-screen display and daylight savings | | | | Network Terminal | RJ45 100Base-TX (auto / full-duplex / half-duplex) | | Audio Input Terminals | 1/8" (3.5 mm) mini-jack connector (monaural)
1 x line in (connect to an amplifier microphone)
1 x mic in (connect to a microphone without amplifier) | | Audio Output Terminals | 1/8" (3.5 mm) mini-jack connector (mono) | | External Device I/O Terminals | 2 x inputs and 2 x outputs | | Memory Card | SD/SDHC/SDXC memory card
Recorded Frame Rates: H.264: Up to 30 fps, MJPEG: Up to 1 fps | | | | Power | PoE: PoE power supply via LAN connector (IEEE802.3af compliant)
AC Adapter: PA-V18 (100-240 VAC) (available separately)
External Power Source: 12 VDC / 24 VAC | | Power Consumption | With PoE: 9.7 W
With PA-V18 AC Adapter: 11.2 W maximum (adapter available separately)
With 12 VDC: 10 W
With 24 VAC: 9.6 W | | Operating Temperature | 14 to 122°F (-10 to 50°C) | | Operating Humidity | 5 to 85% (non-condensing) | | Storage Temperature | -22 to 140°F (-30 to 60°C) | | Storage Humidity | 5 to 90% (non-condensing) | | Mounting | Ceiling, wall | | Dimensions | 5.1 x 6.2" (12.9 x 15.7 cm) | | Weight | 2.6 lb (1.2 kg) | | | | Package Weight | 3.7 lb | | Box Dimensions (LxWxH) | 9.65 x 8.0 x 7.15" |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 23 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
