User manual
Azden SMX-10 Stereo Microphone and Dual

User Manual for Azden SMX-10 Stereo Microphone and Dual Shoe Bracket Kit

• Product category: Shotgun Microphones Azden
• Brand: Azden
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Azden Shotgun Microphones

Product description

• Azden SMX-10 Stereo Microphone
  • Audio for DSLR Demo
  The Azden SMX-10 is a directional stereo microphone for use with standard consumer video cameras. The microphone delivers professional stereo placement and overall audio quality at an affordable price. The SMX-10 measures 6.96" (177mm) in length and includes a windscreen and camera hot shoe mount. The lightweight electret condenser microphone is powered with a single AAA alkaline battery (not included) for up to 400 hours. The coiled cable features a stereo 1/8" (3.5mm) TRS mini connector. Also included is the SMH-X universal shockmount designed to protect the mic from unwanted vibrations when mounted on a camera, tripod, or boompole.
  • Accurate stereo capturing while rejecting off-axis noise.
  • Powered with an AAA alkaline battery for up to 400 hours (available separately).
  • Coiled cable with 1/8" (3.5mm) stereo connector.
  • Includes SMH-X universal shockmount for camera shoes and boompoles.
  • Includes hot shoe mount and windscreen.
  UPC: 095528000434
• Vello CB-510 Dual Shoe Bracket with Silicon Rubber Grip
  • Audio for DSLR Demo
  The Vello CB-510 Dual Shoe Bracket with Silicon Rubber Grip is a side bracket that attaches to the bottom of your camera and provides two cold shoes, one on top and one on the side, for attaching lights and other accessories. An included dual-purpose thumbscrew enables mounting the bracket along with a camera onto a tripod, fluid head, ball head or other gear. The thumbscrew features a 1/4" stud on top and a 1/4" female thread underneath. A silicon rubber grip will serve as an effective handle when you use this bracket solely with a camera, and as a pan handle when you mount it on a tripod.
  
  The two shoe mounts will let you light your subjects from the side and will also free up your camera's shoe mount. The bracket is 4.5" wide, 5" in height, and is compatible with most camcorders and DSLRs. The thumbscrew is adjustable 2.5" along the width. Note: A TTL cord is strongly recommended when using a flash combined with a DSLR. The bracket might not sufficiently support a typical hot shoe flash attached directly.
  Camera & Tripod Mount Bracket
  • • Attaches to the bottom of a camera and provides a cold shoe on top and one on the side
    • A dual-purpose thumbscrew enables mounting the bracket with a camera onto a tripod
    • Features a silicon rubber grip handle
    • Compatible with most camcorders and DSLRs
  UPC: 847628568921

• SMX-10 Stereo Microphone seuvrdrrzdsrxbczefrdauaxyucxryrzdtvyzz
• SMH-X Universal Shockmount for Camera Shoes and Boompoles
• Windscreen
• Shoe Mount
• Mic Holder
• Limited 1-Year Warranty

• Vello - CB-510 Dual Shoe Bracket with Silicon Rubber Grip

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• Azden SMX-10 Stereo Microphone

  Transducer	Stereo Electret Condenser
  Polar Pattern	Dual Unidirectional
  Frequency Response	100 Hz - 18 kHz
  Dynamic Range (Typical)	66 dB
  Signal-to-Noise Ratio	60 dB (1 kHz, 1 Pa.)
  Maximum Input Sound Level	100 dB
  Power Requirements	1.5 VDC (AAA size battery) - not included
  Output Impedance	1.5 kOhms @ 1 kHz
  Output Connectors	1/8" / 3.5 mm
  Pad	No
  Low Frequency Roll-Off	Built-in (non switchable)
  Dimensions	6.96 x .71" / 177 x 18.2 mm (Length x Diameter)
  Weight	1.83 oz / 52 g

  Box Dimensions (LxWxH)	7.9 x 4.1 x 1.9"

• Vello CB-510 Dual Shoe Bracket with Silicon Rubber Grip

  Dimensions

  4.5" wide (11.4 cm) 5" in height (12.7 cm) The thumbscrew slot begins 0.5" into the width and reaches 3" down (1.3 cm / 7.6 cm)

  Box Dimensions (LxWxH)	8.5 x 6.2 x 0.2"

Rating

Discussion