User Manual for BAE 1023L Mic Preamp and 3-Band EQ Click to enlarge the picture
Contents of the user manual for the BAE 1023L Mic Preamp and 3-Band
- Product category: 500 Series BAE
- Brand: BAE
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for BAE 500 Series
|
User manual for the BAE 1023L Mic Preamp and 3-Band contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any BAE product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official BAE user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a BAE product will considerably shorten its lifespan!
|
Product description The 500 Series Guide to Equalizers Read More Hand-wired with Carnhill (St. Ives) transformers, the BAE 1023L is a 500-series mic preamp and EQ. It offers the same mic, line, DI input/output section of the BAE 1073. However, it complements the preamp with an EQ sporting significantly more frequency positions than the aforementioned unit.For instance, while the 1073 provides a healthy six choices of center frequencies for the mid-sweep, the 1023 allows you to center around 160, 270, 360, 510, and 700 Hz—as well as 1.6, 3.2, 4.8, 7.2, 8.2 and 10 kHz—for a total of 11 positions; this gives the unit more functionality and versatility in emphasizing or taming midrange elements. Similar range of motion is provided in the high shelf, where you’ll find five center frequencies (10, 12, 16, 20, 24 kHz) instead of one fixed position. The EQ knobs, with the exception of the high-pass filter, are all concentric, with the outer knob wheeling between frequencies, and the inner knob dictating the level of boost or attenuation. The 1023L’s center frequencies have been stepped in such a way that you can play the midrange in opposition to the high and low shelves at interacting points—a trick many engineers love to employ to boost the aspect of a signal without bringing up unnecessary mud or harshness.Input and output controls are provided, and at the top left of the unit, you’ll find push-buttons which enable various features. For instance, here you can select between line input and DI output (unselected defaults to microphone input), choose to engage 48V phantom power, select between 300 or 1200 Ohms (the differing impedances, among other things, changing the sonic quality of the signal), flip the phase, and engage/bypass the EQ.With all these settings, the unit can work equally well on miked vocals, drum kits, and stringed instruments, as well as DI’ed guitars, basses, or keyboards, which can be routed into the 1023L through a front-mounted 1/4" instrument input. Also, if you pick up two of these units and switch them into line mode, you can then run your mixes through them, gain-staging and EQ’ing your 2-buss with the classic sound of a certain famous 1970s-era British console. This is a trick many engineers like to employ to give their ITB sound a little more analog flavor all around. Note: Please note, this is a 500-series module, so you will require a 500-series chassis (commonly referred to as a "lunchbox") to power and utilize the unit. In the Box BAE 1023L Mic Preamp and 3-Band EQ (500-Series Module) Limited 1-Year Warranty (Extendable to 5 Years with Registration) 500 Series: Guide to Effects Andrew Eisele 10/29/2018 zrwssfttruvztxzuweeubduszaazawue Table of Contents
|
Upload User Manual
Have you got an user manual for the BAE 1023L Mic Preamp and 3-Band EQ in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersBAE 1023L Specs | Frequency Response | 10 Hz to 55 kHz at -3 dB | | Equalizer | 3-Band
LF: ±16 dB fixed-frequency shelving at 35, 60, 110, and 220 Hz
HF: ±16 dB fixed-frequency shelving at 10, 12, 16, 20, 24 kHz
MF: ±12, 18 dB, or 18-dB peaking with switchable, selectable center frequencies (160, 270, 360, 510, and 700 Hz; 1.6, 3.2, 4.8, 7.2, 8.2, and 10 kHz)
High-Pass Filter
18 dB per octave slope, switchable between 45, 70, 160 and 360 Hz | | Impedance | Mic input: ≈1200/300 Ohms
Line input: 10 kOhms
DI input: ≈150 kOhms
Output: 65 Ohms | | Common Mode Rejection Ratio | 100 dB minimum at 60 Hz | | Maximum Output Level | +27.4 dBu at 600 Ohms | | Power Requirements | 115/230 VAC, 28 W | | Gain Range | 0 to 80 dB | | Equivalent Input Noise | -110 dBu; unweighted 300-kHz bandwidth | | Dimensions (W x H x D) | 1.8 x 8.8 x 10.5" / 4.5 x 22.2 x 26.7 cm | | Weight | 6.0 lb / 2.7 kg |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 53 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
