|
User Manual for Behringer PMP2000D - 2000W 14-Channel Powered Mixer with KLARK TEKNIK FX Click to enlarge the picture
Contents of the user manual for the Behringer PMP2000D - 2000W 14-Channel Powered
- Product category: Sound Reinforcement Mixers Behringer
- Brand: Behringer
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Behringer Sound Reinforcement Mixers
|
User manual for the Behringer PMP2000D - 2000W 14-Channel Powered contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Behringer product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Behringer user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Behringer product will considerably shorten its lifespan!
|
Product description - EUROPOWER PMP2000D 2000-Watt 14-Channel Powered Mixer
The PMP2000D from Behringer is a 14-channel powered mixer featuring 2000 watts of Class-D amplification well suited for small to medium sized clubs, boardrooms, or in houses of worship. Channels 1-6 feature IMP mic preamps that include switchable pads and a clip LED, as well as six 1/4" Hi-Z/line level inputs, which allows for connectivity from a variety of sources. Channels 7-12 are configured as stereo pairs with stereo 1/4" line inputs and three IMP mic preamps. Channels 13-14 feature unbalanced RCA inputs for stereo playback as well as stereo RCA outputs for recording to an external device. Additionally, a 1/8" auxiliary input with level control allows you to connect an MP3 player or similar source. Each channel features a musical 3-band EQ, level control, monitor send, and FX send. The master section includes a 24-bit KLARK TEKNIK effects processor with 25 presets, level control, and a tap-tempo button for time-based effects. The dual 9-band EQ allows you to dial in separate EQ settings for the monitor and master outputs allowing for the best sound possible to the front-of-house, while eliminating feedback from the monitors. The mixer also features a USB port that enables channels 1&2 to be directly compatible with Behringer's UltraLink ULM series wireless microphone system. The PMP2000D ships with a power cord. -
- Ultra-compact 2x 1000-Watt stereo powered mixer
- Class-D amplifier technology: enormous power and excellent sonic performance in a light weight package
- 9x “Invisible” IMP mic preamps with switchable +48 V phantom power for condenser microphones
- Ultra-high quality KLARK TEKNIK FX processor with 25 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
- "Wireless-ready" for high-quality Behringer digital wireless system (not included)
- 14-channel mixer section features 6 mono and 4 stereo channels
- Musical 3-band EQ, switchable Pad and Clip LEDs on all mono channels
- Dual 9-band graphic EQs allow precise frequency correction of monitor and main outputs
- Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode
- Adjustable stereo Aux input for connecting external signal sources
- Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
UPC: 748252156549 In the Box Behringer PMP2000D - 2000W 14-Channel Powered Mixer with KLARK TEKNIK FX Power Cord Limited 10-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Behringer PMP2000D - 2000W 14-Channel Powered Mixer with KLARK TEKNIK FX in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersBehringer PMP2000D Specs | Type | 9x XLR, electronically balanced | Mic Input Noise (E.I.N.) | 20 Hz to 20 kHz At 0 Ohms Source Impedance: -108 dB / -110 dB A-weighted At 50 Ohms Source Impedance: -108 dB / -110 dB A-weighted At 150 Ohms Source Impedance: -106 dB / -107 dB A-weighted | Frequency Response | < 20 Hz to 22 kHz (-1 dB) < 20 Hz to 35 kHz (-3 dB) | Maximum Input Level | +13 dBu with PAD | Impedance | 1.5 kOhms, balanced | Signal-to-Noise Ratio (SNR) | 98 dB / 100 dB A-weighted (-15 dBu In @ +35 dB gain) | Distortion (THD) | 0.002%, A-weighted | Pad | -25 dB, channels 1-6 | Phantom Power | Switchable +48 V | | Type | 4x 1/4" / 6.35 mm TRS, balanced (channels 1-4) | Impedance | 1.8 MOhms balanced, 1 MOhm unbalanced | Max Input | + 22 dBu | | Type | 2x 1/4" / 6.35 mm TRS connector, channels 5-6 | Impedance | 20 kOhms balanced, 10 kOhms unbalanced | Maximum Input Level | + 22 dBu | | Type | 6x 1/4" / 6.35 mm TRS connector, balanced channels 7-12 | Impedance | 20 kOhms balanced, 10 kOhms unbalanced | Maximum Input Level | + 22 dBu | | Line In | 2-Track / Line In: 2x RCA, unbalanced, channels 13-14 | Impedance | 20 kOhms unbalanced | Gain Range | - ∞ dB to + 20 dB | Maximum Input Level | + 22 dBu | | Equalizer | Low: 60 Hz (± 15 dB) Mid: 700 Hz (± 15 dB) High: 6 kHz (± 15 dB) | | Type | 1/8" / 3.5 mm TRS connector, unbalanced | Impedance | 10 kOhms | Gain Range | - ∞ dB to +20 dB | | Type | 2x RCA, unbalanced | Impedance | 2.4 kOhms | Maximum Output Level | + 9 dBu | | Graphic EQ | Type: Analog 9-band equalizer | Frequency Range | 20 Hz to 20 kHz in 9 1-octave bands (ISO frequencies) | Bandwidth | 1 octave | Control Range | ± 12 dB | Low Cut Frequency | Type: 18 dB/oct, Butterworth, channels 1-6 Frequency: 100 Hz | | USB | USB Dongle (Not Included): USB socket accepts signals from a maximum of two Behringer ULM microphones | Signal Indicator | LED: 2x green | | Noise | Main Mix at - ∞, Channel Fader at - ∞: - 59 dBu / - 59 dBu A-weighted Main Mix at 0 dB, Channel Fader at - ∞: - 56 dBu / - 56 dBu A-weighted Main Mix at 0 dB, Channel Fader at 0 dB: - 56 dBu / - 56 dBu A-weighted | | Maximum Output Power | Both Channels Driven 8 Ohms Per Channel: 500 W 4 Ohms Per Channel: 1000 W Bridged Mode 8 Ohms: 2000 W | | Type | Speakon connector | Load Impedance | Left/Monitor: Minimum 4 Ohms Right/Mono: Minimum 4 Ohms Bridge: Minimum 8 Ohms | | Display | 2-digit, 7-segment LED | Power | Mains voltage 120 VAC, 50/60 Hz Mains Connection: Standard IEC receptacle | Fuse | T 8 A H 250 V | Power Consumption | Power Consumption at 4 Ohms, 1/8 Rated Power: 180 W | Dimensions (H x W x D) | 10.9 x 17.9 x 9.8" / 27.6 x 45.5 x 25.0 cm | Weight | 19.8 lb / 9.0 kg | | Package Weight | 24.0 lb | Box Dimensions (LxWxH) | 21.0 x 13.0 x 13.0" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 39 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
Post new comment to Behringer PMP2000D - 2000W 14-Channel Powered Mixer with KLARK TEKNIK FX
Subject: PMP 2000D and karioki | Date: 26.07.2021 23:27:32 | Name: Ron Henderson | I have a PMH 1000 but I fried the power supply so I purchased the new PMP 2000D for a mobile studio. Anyway the PMH 1000 had a karioki mode. is there anyway I can use the PMP 2000D for karioki???... if not can you please tell me how much power I need to power just the mixing board from the PMH 1000 and which positive and negative colored wires to provide power to just the mixing board maybe 12 volts??? from the PMH 1000 the I would be able to use the mixer from the PMH 1000 and connect it to the PMP 2000D and that would give me another 10 or so input jacks to increase the input to the PMP 2000D. then I wouldn'have to dump the PMH 1000. too much money invested. if I could do this it would be wonderful. can you help me??? ron henderson. thanks | Post reply |
Subject: PMP 2000D and karioki | Date: 26.07.2021 23:26:36 | Name: Ron Henderson | I have a PMH 1000 but I fried the power supply so I purchased the new PMP 2000D for a mobile studio. Anyway the PMH 1000 had a karioki mode. is there anyway I can use the PMP 2000D for karioki???... if not can you please tell me how much power I need to power just the mixing board from the PMH 1000 and which positive and negative colored wires to provide power to just the mixing board maybe 12 volts??? from the PMH 1000 the I would be able to use the mixer from the PMH 1000 and connect it to the PMP 2000D and that would give me another 10 or so input jacks to increase the input to the PMP 2000D. then I wouldn'have to dump the PMH 1000. too much money invested. if I could do this it would be wonderful. can you help me??? ron henderson. thanks | Post reply |
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
looking for a user manual for Quickbooks Premier Nonprofit 2020 for a Disabled American Veterans office.... Bower SFD9260.... 4-IN-1 WIRELESS CHARGER
... Brand :Gemini,model # XGA 4000,AND IT WAS PURCHASED NEW IN 2022,OR POSSIBLY EARLY 2023.WORKED perfect till one day I hit power switch and blew fuse x2... ZZSTAR binoculars...
|
Discussion |
Latest contributions to the discussion:
v18 Name: Craig Mcinturff Davis & Sanford Provista 7518B Tripod I am looking for a camera mounting plate for a v18 fluid head Davis & Sandford ... Impact SF-ABRL160 Flash stopped working Name: Sarah sananes Impact SF-ABRL160 Stand Mount Flash with Hello, our flash is connected to a canon camera and all of the sudden the flash is no longer working.
Does the flash have a certain battery life? ... REPEAT REQUEST AS YOU DID NOT ANSWER YOU JUST SENT ME MY MESSAGE BACK -PLEASE HELP Name: Tish Hopkins Benro TAD37C Series 3 Adventure Carbon Hi again-- all this did was send this email back to me with a link that brought me right back here... what is this?? also a link to search for manuals-- ive been there done that there is NO Manual to be found that answers my ? Please HELP thanks!!
Hi there is an extra small sc... Tripod heads DO NOT sit flush on the plate of the tripod Help Please Name: Tish Hopkins Benro TAD37C Series 3 Adventure Carbon Hi there is an extra small screw on the plate that the tripod head screws on that prevents my gimbal tripod head from sitting flush when it is screwed on. this is very annoying and does not allow my camera to stay steady when shooting. Please tell me how to resolve this issue. th... battery replacement Name: Danette L Boyd-Perez Doxie Go SE Portable Scanner Hello-- I have been working w/ support- it seems they sent incorrect battery replacement.
I confirmed DX-255 and was sent battery NP 120. There is no way that battery fits inside the panel of the DX-255. Please advise next steps thank you....
|
|