|
User Manual for Benro MoveOver8B Carbon Fiber Slider with Case Click to enlarge the picture
Contents of the user manual for the Benro MoveOver8B Carbon Fiber Slider with
- Product category: Camera Sliders Benro
- Brand: Benro
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Benro Camera Sliders
 |
User manual for the Benro MoveOver8B Carbon Fiber Slider with contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Benro product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Benro user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Benro product will considerably shorten its lifespan!
|
Product description This Benro MoveOver8B Carbon Fiber Slider with Case includes an aluminum slider carriage that runs on carbon fiber rails with 35.4" of actual carriage travel, and a soft carry case. The carriage features a flat mounting surface with a 3/8"-16 threaded mounting stud for mounting your flat base fluid head, and it features pre-tensioned roller bearings for a smooth glide. A built-in friction brake is controlled by a single knob, allowing you to adjust the friction on the slider, or even use it as a brake when the slider is level.
The slider features 18mm diameter carbon fiber rails and supports a total payload of up to 17.6 pounds. The slider can be mounted on a tripod or stands, or placed on a level surface. The built-in bubble level enables you to confirm that your slider is level. Each leg mounts onto the slider track ends via a rosette and can rotate throughout 360°, and each foot has approximately 4" of height adjustment for leveling. You can operate the slider on any angle from 0 to 90°, and you can even undersling the slider. - The adjustable legs can be moved throughout 360° of rotation. However, they are at their most supportive between 12 and 60°.
- The track ends allow you to mount the slider on stands using the Baby pin slot. Each track end features 1/4"-20 and 3/8"-16 threaded mounting holes.
- The slider can also be mounted directly onto a tripod using the 3/8"-16 or 1/4"-20 threaded mounting hole on the attached cheese plate.
- The carriage has four 1/4"-20 threaded mounting holes for accessories.
In the Box Benro MoveOver8B Carbon Fiber Slider with Case (35.4") Limited 2-Year Warranty, Extendable by 3 Years with Product Registration Table of Contents
|
Upload User Manual
Have you got an user manual for the Benro MoveOver8B Carbon Fiber Slider with Case in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersBenro Moveover8 Specs | | | Load Capacity | 17 lb / 7.71 kg | | Travel Distance | 35.4" / 0.9 m | | Bubble Level | Yes | | | | Camera Mounting Screw | 3/8"-16 Male | | Accessory Mounting | 4 x 1/4"-20 Female (Carriage)
3 x 1/4"-20 Female (Rails)
1 x 3/8"-16 Female (Rails) Two 1/4"-20 and one 3/8"16 accessory mounting threads on the top of each of the track ends, one 1/4"-20 on the underside. | | Tripod Mounting | 2 x 3/8"-16 Female Thread
1 x 1/4"-20 Female Thread | | Stand Receiver | 2 x 5/8" | | | | Diameter | 0.71" / 18 mm | | Material | Carbon Fiber | | | | Quick Release Plate Type | No Quick Release | | Dimensions | 6.5 x 4.7 x 0.5" / 166 x 119 x 13 mm | | | | Body Material | Aluminum | | Track Width | 3.94" / 100 mm | | Leg Height Adjustment | 0.00 to 3.94" / 0 to 100 mm360 | | Weight | 3.64 lb / 1.65 kg, Including Legs, Knobs | | | | Package Weight | 7.0 lb | | Box Dimensions (LxWxH) | 47.0 x 9.2 x 3.8" |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 52 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
inspiron 3470...
Film Scanner 8 mm + super 8 REELS MOVIE MAKER PRO...
HP 3630 deskjet printer/scanner...
Dell KB216 ITALIAN Slim Office Multimedia Keyboard BLACK.
...
Mistral MC2300R 25L Detachable Air Coller with Steriliser.
Thank you in advance for your assistance.
Sincerely,
Jonathan Chua...
|
|
