|
User Manual for Bogen Communications TAMB2 Telephone Access Module with Power Supply Click to enlarge the picture
Contents of the user manual for the Bogen Communications TAMB2 Telephone Access Module
- Product category: Telephone Audio Interfaces Bogen Communications
- Brand: Bogen Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Bogen Communications Telephone Audio Interfaces
 |
User manual for the Bogen Communications TAMB2 Telephone Access Module contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Bogen Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Bogen Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Bogen Communications product will considerably shorten its lifespan!
|
Product description This TAMB2 Telephone Access Module with Power Supply from Bogen Communications is designed as an interface between a telephone system and a paging system, providing dual-purpose voice paging. It's compatible with the full range of analog telephone port types, and is capable of station port or trunk port operation. Music from a background music source (with stereo-combining RCA jacks and volume control) is possible via a line-level input, which allows background music to be used during a page with central paging amplifiers don't have a muting provision. This module is ideal for simple or complex telephone paging situations. A 24V power supply is included and is required for all modes of operation. - Loop start, ground start, and station port (90V ring up) compatibility
- Pre-announce and confirmation tones (defeatable)
- Works with paging-only and two-way (talk back) systems
- Background music input with volume control
- Suppresses background music during paging
- Station access disconnect is dynamically controlled using a combination disconnect timer, and VOX disconnect timer or Calling Party Control (CPC) signal detection
- Station port maximum page times from 1- 200 seconds
- Disconnect VOX timer is adjustable from 1 to 11 seconds of silence
- VOX and default timers independently inhibitable
- Calling Party Control (CPC) signal from switch immediately disconnects station port
- Flexible Mounting Configuration: wall, single unit rack, and dual side-by-side rack mount
- Easily accessible controls and switches
- Trunk Timer feature helps prevent system blockage
- 24V power supply required for all modes of operation (150mA min. capacity)
- 1 C-Form (N.O. and N.C.) contact pair available for operating external equipment
- Pluggable terminal strip connectors
- FCC Part 68 registered; ETL Listed
UPC: 765368482058 In the Box Bogen Communications TAMB2 Telephone Access Module with Power Supply Power Supply 2-Year Limited Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Bogen Communications TAMB2 Telephone Access Module with Power Supply in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersBogen Communications TAMB2PS Specs | Frequency Response | Paging Frequency Response: 200 - 8000 Hz, ±1 dB | | Impedance | Input/Output Impedance: 600 ohms, nominal | | Ringer Equivalence | 1.3B | | Compatibility | Station Port: two-wire ring start
Trunk Port: two-wire loop start or ground start | | Pre-announce/Confirmation Tones | 800 Hz, ±20%, one-half second duration | | Default Disconnect Timer | 1 to 200 seconds, adjustable or inhibit | | VOX Disconnect Timer | 1 to 11 seconds, adjustable or inhibit | | Auxiliary Contact Rating | 0.6 A @ 125 VAC resistive
0.6 A @ 110 VDC resistive
2.0 A @ 30 VDC resistive | | Connection Terminal | Pluggable screw terminal | | Power Requirements | 24 VDC @ 150 mA (included) | | Operating Temperature Range | 32 to 120°F (0 to 49°C) | | Finish | Black enclosure with white lettering | | Dimensions | 8.5 x 1.75 x 3" (21.59 x 4.44 x 7.62 cm) | | Weight | 2.0 lb (0.9 kg) | | | | Package Weight | 2.05 lb | | Box Dimensions (LxWxH) | 9.8 x 6.0 x 2.1" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 15 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
NEWER F100 CAMERA MONITOR...
PhotoStage progessional...
powerpint...
Night Detective Quest 5M 5x Night Vision Monocular ...
Ibanez AM93QM User Manual....
|
|
