User manual
Bosch FLEXIDOME AN 5000 960H 9

User Manual for Bosch FLEXIDOME AN 5000 960H 9 to 22mm Vandal-Resistant WDR Day Night Dome Camera with Heater

• Product category: Wired Analog & HD Cameras Bosch
• Brand: Bosch
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Bosch Wired Analog & HD Cameras

Product description

Detailed Lighting
• In harsh lighting, the difference between the brightest and the darkest parts of a scene can be extreme. To produce a clear picture in these conditions, the CCD sensor in the camera generates 2 images; one long exposure to resolve details in the scene's darkest areas, and one short exposure to resolve details in the scene's brightest areas. The advanced image processing technology in the camera combines these dual shutter images, mixing pixels from each exposure to produce the most detailed image possible. The wide dynamic range for all lighting conditions reveals picture details that are otherwise unseen.

Day/Night Mode
• The day/night mode provides enhanced night viewing by increasing the IR sensitivity. The IR filter can switch from color to monochrome automatically by either sensing the illumination level or via the alarm input. The filter can be switched manually via the alarm input, through the camera menu, or via the Bilinx coaxial control interface. An internal through-the-lens IR detector enhances the monochrome mode stability, as it prevents reverting to the color mode when IR illumination is on. IR contrast is also measured and used to handle reflected IR light in outdoor scenes.

Bilinx Technology
• Bilinx is a bidirectional communication capability embedded in the video signal of this camera. Users can check status, change camera settings, and even update firmware from virtually anywhere along the video cable (not included). Bilinx reduces service and installation time, provides for more accurate set-up and adjustment, and improves overall performance. In addition, Bilinx uses the standard video cable to transmit alarm and status messages, providing high performance without additional installation steps.

Lens
• With this dome camera, there is no compromise between scene coverage and aesthetics of the camera. The featuring 9 to 22mm varifocal lens offers wide coverage.

Picture Performance
• The camera comes with numerous functions to help fine-tune the picture performance to match your installation environment. The Smart BLC function automatically and dynamically compensates for strong backlight. The Peak White Invert function reduces glare from highlight areas while the contrast and sharpness function enhance details in bright or misty scenes. SensUp enhances sensitivity by a factor of 10. The default shutter feature improves the motion performance in auto exposure mode, and Dynamic Noise Reduction (DNR) dynamically reduces noise in the picture.

Easy Installation
• The lens wizard helps focus the lens at the maximum opening to ensure proper back-focus is maintained throughout the 24-hour cycle. No special tools or filters are required. The 6 independent, pre-programmed operating modes support typical applications but are fully programmable for individual situations. Switching between modes is easy via Bilinx Technology or the external alarm input.
  
  Further, the video BNC and power connectors on flying leads, a built-in test pattern generator produces signals to test and fault-find cables, a multi-lingual On-Screen Display (OSD), a high-efficiency power supply make installation easier. Cable compensation is used to avoid the need for amplifiers in long distance coaxial connections up to 3,000' (1,000m). It can prevent the image quality degradation caused by signal losses from long cable lengths.

Privacy Masking
• 15 different privacy zones allow specific parts of a scene to be blocked. Pre-program any part of the scene to be masked.

Video Motion Detection
• The built-in video motion detector allows you to select 4 programmable areas with sensitivity thresholds. When motion is detected, alarms can be displayed in the video signal or an alarm message can be transmitted via the Bilinx Technology.

Applications
• The camera is appropriate to be used at entrance foyer/lobbies with glass, warehouses and loading bays, prisons and correctional facilities, airport locations including baggage handling and fuel & equipment storage, and stadiums.

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

Bosch 960H Specs

Rating

Discussion