|
User Manual for CAME-TV CAME-Single 3-Axis Handheld Camera Gimbal Click to enlarge the picture
Contents of the user manual for the CAME-TV CAME-Single 3-Axis Handheld Camera Gimbal
- Product category: See All Gimbal Stabilizers CAME-TV
- Brand: CAME-TV
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for CAME-TV See All Gimbal Stabilizers
 |
User manual for the CAME-TV CAME-Single 3-Axis Handheld Camera Gimbal contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any CAME-TV product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official CAME-TV user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a CAME-TV product will considerably shorten its lifespan!
|
Product description The CAME-Single 3-Axis Handheld Camera Gimbal from CAME-TV is a single-handed stabilizer that supports loads up to 2.6 pounds, making it suitable for use with compact cameras such as the Panasonic GH4, Sony a7S, and Blackmagic Pocket Cinema Camera. It utilizes three motors that stabilize the camera along the pan, tilt, and roll axes. This compensates for shakes, vibrations, and other unwanted movements, allowing you to capture smooth, free-floating shots. The system offers multiple operation modes for increased creative possibilities. You can choose to lock the camera in place along all three axes or have the camera smoothly follow your pan and tilt motions while keeping the horizon level. There is also a Commixture Mode, which locks the tilt axis while allowing the camera to follow left and right panning movements. Modes can be easily switched using a joystick, which can also be used to adjust camera pan and tilt position.
The system includes a quick-release plate for mounting your camera. As with sled-style stabilizers, your camera needs to be balanced in order to get the best performance. The balancing process is made easier thanks to tool-less adjustments along all axes. On the bottom of the handle, you'll find a 1/4"-20 threaded hole for mounting the stabilizer on an additional device, such as a slider, jib, or tripod. An additional 1/4"-20 threaded hole is located just above the handle for convenient mounting of a monitor without throwing of the camera balance or exceeding the load capacity of the motors.
The stabilizer is powered using two included 18650-type, 2500mAh rechargeable lithium-ion batteries that slot into the handle and provide around 10 hours of use on a full charge. A battery charger is also included, along with a hard carry case for storing and transporting the system. - Key Features
-
- 2.6 lb load capacity
- Updated 32-bit board
- Lock, Follow, and Commixture Modes
- Joystick for pan and tilt control
- Button on side of handle for power on/off and changing modes
- Tool-less balancing
- Quick-release plat
- Larger frame for increased tilt range
- Internal rechargeable battery provides around 20 hours of operating time
- 1/4"-20 threaded hole on bottom of the handle for mounting stabilizer on tripods, sliders, jibs, and other support devices
- 1/4"-20 threaded hole above the handle for mounting a monitor or other accessory
- Hard carry case included
In the Box CAME-TV CAME-Single 3-Axis Handheld Camera Gimbal Battery Charger Hard Carry Case Limited 1-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the CAME-TV CAME-Single 3-Axis Handheld Camera Gimbal in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersCAME-TV SINGLE+DC112+CD6 Specs | Load Capacity | 2.6 lb (1.2 kg) | | Battery | Internal rechargeable | | Battery Operating Time | Approx. 20 hours | | Tripod Mounting Thread | 1/4"-20 | | Accessory Mounting Threads | 1 x 1/4"-20 | | Dimensions | Not specified by manufacturer | | Weight | 2.6 lb (1.2 kg) | | | | Package Weight | 8.5 lb | | Box Dimensions (LxWxH) | 18.0 x 14.0 x 7.0" |
Rating68% users recommend this product to others. And what about you?
This product has already been rated by 74 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
NEWER F100 CAMERA MONITOR...
PhotoStage progessional...
powerpint...
Night Detective Quest 5M 5x Night Vision Monocular ...
Ibanez AM93QM User Manual....
|
|
