User manual
Cerwin-Vega P2.1 Tour Set with Two

User Manual for Cerwin-Vega P2.1 Tour Set with Two P1000X Powered Speakers and One P1800SX Powered Subwoofer

• Product category: PA Speakers Cerwin-Vega
• Brand: Cerwin-Vega
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Cerwin-Vega PA Speakers

Product description

• P1000X 10" 2-Way Powered Full-Range Speaker The Cerwin-Vega P1000X is a two-way, bi-amped, full-range bass-reflex speaker. It employs a 10-inch woofer and a high-frequency compression driver, powered by a custom Class-D amplifier. With a power rating of 1000 watts, the P1000X can be used in a multitude of live sound reinforcement scenarios.
  
  A proprietary hemi-conical horn provides premium sound clarity over an even and wide coverage area. A built-in mixer with convenient I/O connections allows for simple and fast setup, while Enhanced EQ, VEGA BASS boost and High-Pass Filters enable accurate tuning and performance for any live sound application.
  
  The P1000X is a versatile product that can be used as a single speaker for small venues, set in pairs or installed with threaded hang points, and combined with the P1800SX Sub for a larger venue needing more coverage and SPL. Its compact size makes it ideal to operate as a floor monitor as well.
• P1800SX 18" Active Subwoofer The Cerwin-Vega P1800SX 18" Active Subwoofer compliments the P-Series portable speaker system with low frequency extension. This powered subwoofer employs an 18" woofer with a custom 2,000W Class-D amplifier. The woofer and the matched amplifier are enclosed in a multi-ply hardwood cabinet, which helps enhance the low-frequency response.The frequency shaping controls and VEGA BASS boost ensure that the user can dial in the correct extent of bass for each venue. While designed for use with the P1500X Bass-Reflex Speaker, the P1800SX Subwoofer can also be used for low frequency extension with other Cerwin-Vega tops or even other brands.

  Subwoofer

  • Rugged enclosure with multiple handle locations makes transport and setup safe and easy.
  • Uses high-efficiency Cerwin-Vega components for low-frequency bass.
  • The integrated mixer and amplifier design makes the subwoofer suitable for use in limited power source environments and reduces the number of gear required for an easy setup.
  • Stackable design to minimize transportation and storage area. Thick, powdered coated grill protects the drivers during transportation and storage.
  • Casters are included with the P1800SX Subwoofer for easy transfer to and from the performance area.

  Amplifier

  • The 2,000W Class-D amplifier delivers low frequency extension.
  • Built-in limiter with On/Off LED indicator provides essential protection to minimize the risk of down-time and prevent component damage.

• Power Cord (2M, 10Amps),

• Spare Fuse

• RCA - ¼" TS Adapters

• Limited 2-Year Warranty

• 6.5' (2.0m) 10A Power Cord

• Spare Fuse (Located Inside the Fuse Holder)

• Wheel Casters with Mounting Hardware

• Limited 2-Year Warranty

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• P1000X 10" 2-Way Powered Full-Range Speaker

  System Configuration	Active 2-way full-range, bass reflex
  Frequency Range	51 Hz - 22.5 kHz, -10 dB
  Frequency Response	61.0 Hz - 20.6 kHz, ±3 dB
  Nominal Coverage Angle	90° horizontal, 65° vertical, -6 dB
  Maximum SPL	128 dB, 1W @ 1m
  Amplifier Type	Class D
  Amplifier (Power)	1000 watts dynamic
  Low Frequency Driver	10"
  High Frequency Driver	1¾" diaphragm, 1" exit
  Connectors	CH 1 & 2 - Neutrik XLR/TRS inputs, CH3 dual ¼" TS THRU 1 & 2 - XLR, MIX XLR
  Indicators	Signal/Clip, Power, Limiter, Protect
  Enclosure	Polymer cabinet, flush waveguide
  Grille	18 gauge, perforated steel
  Mounting	35 mm pole socket 6 x M10 suspension
  Operating Temperature	-20 to 55°C
  Controls	Gain/Level (input per channel)Line/Mic-D.I. (input per channel)Enhanced EQ (On/Off)Vega Bass Boost (On/Off)High Pass Filter (On/Off)Front Light Limiter (On/Off)Main Volume (Output)Remote (Optional)AC Input Voltage (220V-240V / 100V-120V)Power (On/Off)
  Dimensions	16.78 kg (37.0 lb)
  Weight	37.0 lb (16.78 kg)

• P1800SX 18" Active Subwoofer

  System Type	Active subwoofer, bass reflex
  Frequency Range	31.5 Hz to 272.0 Hz (-10 dB)
  Frequency Response	38.0 Hz to 183.0 kHz (±3 dB)
  Maximum SPL	At 3.3' (1 m): 136 dB Maximum SPL: Peak Transducer Sensitivity (dB) + Dynamic Amplifier Power (dB). Amplifier power measurement performed with limiter protection circuits engaged. Subwoofers measured in half space.
  Amplifier Type	Class D
  Rating	Dynamic: 2,000 W Continuous: 725 W
  Driver	Low Frequency: 18.0" (45.7 cm)
  Connectors	Channels 1 & 2: Neutrik XLR/TRS inputs THRU 1 & 2: XLR, LINK - XLR
  Impedance	Channels 1 & 2: 20 kΩ
  Indicators	Signal/Clip, Power, Limiter, Protect
  Enclosure	18 mm reinforced wood cabinet
  Grille	18 gauge, perforated steel
  Mounting	1.3" (35.0 mm) pole socket
  Fuse	0.1 x 0.7" (5.0 x 20.0 mm) T8A/250 V
  Controls	Polarity Reverse (On/Off) Vega Bass Boost (On/Off) HPF Thru & LPF Sub (On/Off) High Pass Filter (On/Off) Front Light Limiter (On/Off) Main Volume (Output) Remote (Optional) Power (On/Off)
  AC Input Voltage	100 to 120 V
  Operating Temperature	-4 to 131°F (-20° to 55°C)
  Dimensions (H x W x D)	24.25 x 20.00 x 24.49" (616.00 x 508.00 x 622.00 mm)
  Weight	With Casters: 84.0 lb (38.1 kg) Without Casters: 77.0 lb (34.9 kg)

  Box Dimensions (LxWxH)	29.0 x 27.0 x 25.0"

Rating

Discussion