|
User Manual for Convergent Design Apollo OLED Monitor, Recorder, Switcher Click to enlarge the picture
Contents of the user manual for the Convergent Design Apollo OLED Monitor, Recorder,
- Product category: Recorders & Duplication Convergent Design
- Brand: Convergent Design
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Convergent Design Recorders & Duplication
 |
User manual for the Convergent Design Apollo OLED Monitor, Recorder, contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Convergent Design product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Convergent Design user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Convergent Design product will considerably shorten its lifespan!
|
Product description Convergent Design Announces Apollo, a Portable Multi-Camera Recorder/Switcher Read More cvzqbybecsrqueedrxrcbedeyffsdxdcue Convergent Design's Apollo OLED Monitor, Recorder, Switcher is a four camera HD video switcher that can record all four video inputs while simultaneously recording either the quad split display, or the program output. It builds upon the proven hardware of the Odyssey 7Q+, but stands by itself as a very different product. Dual SSD slots are provided for recording video to Convergent Design Premium 2.5" SSDs, which offer high speeds, reliability, and power-loss protection. Select Samsung SSDs are supported as an option to Convergent Design branded SSDs. The monitor features a 7.7", 1280 x 800, OLED, touchscreen display with a 3400:1 contrast ratio, true blacks, and professional monitoring features such as waveform, histogram, vectorscope, and 3D LUT support.
The Apollo features four distinct HD-SDI inputs, with two HD-SDI outputs as well as an HDMI in and output. has two 3G-SDI inputs, two 3G-SDI outputs, and two bi-directional 3G-SDI connectors which can be assigned as either inputs or outputs via menu selection. Most of the inputs/outputs are on the bottom of the monitor, with 1/4"-20 mounting threads on the sides. The touchscreen allows you to access the menu, and also select your program feed from your four inputs. As you would expect to find on a professional switcher, an on screen indicator shows you which camera input is active. The Titan HD Extract option, which allows you to create multiple HD windows from a single 4K source is included. An AC adapter is included for powering the device, with optional battery plates available. - Titan HD Extract Option
- The Titan HD Extract option allows you to take one camera to a shoot, and obtain three separate recordings (plus a live switch between the three images). This feature can add a multi-cam look to single camera shoots, without the expense of three cameras and three recorders. One view is an HD downscale/super-sample of the full image area and two views are windows selected from the full image area. These views can be panned smoothly through the 4K field and the three views can be Live-Switched. All four HD views (The master/wide, the two windowed views, and the live-switched/program) can be recorded simultaneously in Apple ProRes with matching timecode and file names.
- Professional Monitor
- 7.7" 1280x800 OLED touchscreen panel featuring true blacks and accurate color with a full range color gamut for REC709 or DCI-P3 viewing.
- Multi-Stream Monitoring / Recording
- Up to four HD video signals can be input and viewed simultaneously (quad-split) or live-switched (choose between inputs for full screen display). The four SDI, or three SDI and one HDMI inputs can be recorded individually with matching timecode as ProRes HQ, 422, or LT. In addition to recording the four HD inputs you can simultaneously record the quad-split view or the live switch.
When recording from multiple cameras, all the cameras must be outputting the same format and frame rate to the Apollo. - Image Analysis Tools
- Waveform— Luma only, RGB Parade, Red only, Blue only, Green only, Full Size and Compact Size options
Histogram — Luma only, RGB Parade, Red only, Blue only, Green only, Full Size and Compact Size options
Vectorscope — Analog or digital; Trace display in green or color (true CbCr); Variable Zoom 1.0x - 15.0x (finger drag left-right); Zoom Presets 1, 2, 5, 10, 15x (finger drag up-down)
False Color — Six programmable levels & adjustable ranges
Zebras — Dual adjustable zebra exposure indicators, selectable colors
LUT Support — LUTs for Log formats from ARRI, Blackmagic Design, Canon Panasonic and Sony, plus up to 140 custom 3D-LUTs in .CUBE format - LUT System & Custom 3D LUT Support
-
- Support for user-loadable custom 3D LUTs (up to 140)
- 17x, 32x, 33x, 64x, 65x 3D-LUT .CUBE formats supported
- .CUBE LUTs translated for Apollo using Convergent Design 3D-LUT Converter App
- LUTs are currently for monitoring only, not recording
- LUTs viewed during recording noted in XML file metadata (new CD Apple ProRes Transfer Utility 1.7 required)
- Extended and Legal Range LUTs supported (EE vs LL)
- Image Analysis Tools can measure "LUTTED" image or original source
- Video outputs can independently turn ON/OFF LUT or Mirror OLED
- Additional Monitoring Features
- Monochrome Monitoring Mode — View Luma only or individual Red, Green, or Blue channel in gray tone
Aspect Ratio Guides — Standard and Custom (user adjustable), may be used for framing guides, Horizontal/Vertical framing guides available - SSD Recording Media
- To enable recording on the Apollo, Convergent Design Premium SSDs or third party SSDs qualified by Convergent Design must be used. Premium SSDs are available in 256GB, 512GB, and 1TB capacities.
- Third-Party SSD Support
- The Apollo supports approved third party SSDs (optional SSD Handle kits required to mount). Qualified third-party SSDs include:
- Samsung 850 Evo PRO in 128GB, 512GB, and 1TB
- Samsung 850 Evo 1000GB
Note: Samsung SSDs draw more power than Convergent Design SSDs. Convergent Design recommends using an AC-powered USB3 adapter or a Thunderbolt adapter when connecting Samsung SSDs to a computer. - Updates
- An announced firmware update will add:
- Dual 4K/UHD recording in Apple ProRes in 24p, 25p, and 30p.
- DNxHD recording Audio Delay
- Remote keyboard control pad support
- On-screen source naming
- Cascade interconnect for 12 channel HD / 6 channel 4K recording
- Designed, Built, and Tested in the USA
- Convergent Design monitors/recorders are designed and built in the United States and each model is thoroughly test before they are shipped. They go through a lengthy burn-in, where they are heat cycled while operating, and then endure another lengthy period where they are repeatedly turned on and off. They are also drop tested, then individually tested, all in Convergent Design's factory in Colorado Springs, Colorado, USA.
UPC: 722301479728 In the Box Convergent Design Apollo OLED Monitor, Recorder, Switcher Micro HDMI to HDMI Cable (36") cvzqbybecsrqueedrxrcbedeyffsdxdcue SSD Handle and Mounting Screw Pack for Odyssey7, 7Q, and 7Q+ (5-Pack) SDI Cable USB 3.0 Adapter AC Adapter Limited 1-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Convergent Design Apollo OLED Monitor, Recorder, Switcher in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersConvergent Design Apollo Specs | | | Panel Type | OLED | | Display Size | 7.7" / 19.5 cm | | Screen Resolution | 1280 x 800 | | Viewing Angle | Horizontal: 176° | | Touchscreen | Yes | | Contrast Ratio | 3400:1 | | Bit Depth / Color Support | 8-Bit (16.7 Million Colors) | | | | Video | 4 x BNC (3G-SDI) Input
1 x HDMI Type C (HDMI 1.4b) Input
2 x BNC (3G-SDI) Output
1 x HDMI Type C (HDMI 1.4a) Output | | Embedded Audio | HDMI: 2-Channel
SDI: 2-Channel | | Audio | 1 x 3.5 mm Line Input
1 x 3.5 mm Headphone Output | | Built-In Speaker | 1 | | Power | 1 x Barrel Input | | Other I/O | 1 x Micro-USB
1 x Proprietary | | Card Slot | None | | | | Camera Trigger | SDI, HDMI | | Encoding Formats | 4096 x 2160
ProRes 422 HQ, 422, LT 10-Bit 4:2:2 at up to 60 fps
DNxHD 10-Bit 4:2:2 at up to 60 fps
3840 x 2160
ProRes 422 HQ, 422, LT 10-Bit 4:2:2 at up to 60 fps
DNxHD 10-Bit 4:2:2 at up to 60 fps
2048 x 1080
ProRes 422 HQ, 422, LT 10-Bit 4:2:2 at up to 60 fps
DNxHD 10-Bit 4:2:2 at up to 60 fps
1920 x 1080
DPX 12-Bit 4:4:4 at up to 30 fps
DPX 10-Bit 4:4:4 at up to 60 fps
ProRes 4444 XQ 12-Bit 4:4:4 at up to 60 fps
1280 x 720
ProRes 422 HQ, 422, LT 10-Bit 4:2:2 at up to 60 fps
DNxHD 10-Bit 4:2:2 at up to 60 fps | | Recording Media | 2 x 2.5" SSD (SATA III) | | | | DC Input Power | 6.5 to 34 VDC | | Battery Type | None | | Power Consumption | 20 W (Maximum) | | | | Operating Temperature | 14 to 104°F / -10 to 40°C | | Storage Temperature | -4 to 128°F / -20 to 70°C | | | | Material of Construction | Magnesium | | Dimensions (W x H x D) | 7.9 x 6.1 x 1" / 20 x 15.5 x 2.5 cm | | Weight | 1.2 lb / 560 g | | | | Package Weight | 3.45 lb | | Box Dimensions (LxWxH) | 14.0 x 10.6 x 2.6" |
Rating68% users recommend this product to others. And what about you?
This product has already been rated by 75 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Swan Bread maker SWBBA7...
Expert intel sixcore i5-8400 4GHZ turbo...
Color LaserJet Pro MFP M281fdw...
call of duty world war II...
Audio Technica AUDIO-AT8631
data sheet ...
|
| Discussion |
Latest contributions to the discussion:
Query
Name: Geoff Dibblee
Carson zOrb Digital USB Microscope
when useing the zorb it will not cover the whole of a stamp back or front as i am useing it for perfins stamps and whati have recived in the box just covers half a letter please can you help me to find away to enlarg the whole stamp
...
Blown transformer
Name: Dik Schouten
Demeter VTDB-2 Single Channel Tube Direct
Dear Sirs,where can i buy a new transformer for my VTDB 2b? If possible een 230 volt primary site...Y.S. Dik Schouten
...
Battery charger light does not turn yellow or green when charging LP-E17
Name: DAVE
Canon LC-E17 Charger for LP-E17 Battery
I have a new Canon battery charger for EOS R10 Camera. It has lights that turn yellow and green when charging the Canon battery that came with the camera. But when I put in the BM battery LP-E17 no lights come on. I can tell the battery is charged when I put it in the camera, b...
Stiff center dial wheel
Name: Reynolds, Jane
Tasco 10x50 Essentials Porro Binocular
It is very hard for me to turn the center wheel with the ridges on it.
Could you please email me the user manual for the Tasco 10 x 50 mm zip focus? Thank you...
Redfield 2-7x33
Name: Mike
Redfield 2-7x33 Revolution Riflescope
Can the elevation and windage knobs be reset to zero?
Thanks!...
|
|
