User manual
CraftBot PLUS 3D Printer Education Bundle

User Manual for CraftBot PLUS 3D Printer Education Bundle

• Product category: 3D Printers Others
• Brand: Others
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Others 3D Printers

Product description

• CraftBot PLUS 3D Printer (Anthracite Gray) Designed as a user-friendly, plug-and-play tool for beginners and experienced users, the anthracite gray CraftBot PLUS 3D Printer from CraftUnique features Fused Filament Fabrication (FFF) printing technology; a build volume of 9.8 x 7.9 x 7.9"; a layer resolution of 100 to 300 microns; a print speed of 50 to 200mm/s; and the ability to utilize 1.75mm filaments. It is equipped with a single extruder nozzle, an open print chamber with a heated print bed, and a color LCD touchscreen. Users may print their compatible .obj, .stl, and .cwprj files via wired USB connectivity and USB flash drives using the included CraftWare printing software. The CraftBot PLUS is compatible with Windows 7 and above.

  General Features

  Printing Accuracy
  • Thanks to its 100 micron / 0.1mm layer resolution, the CraftBot PLUS provides a very high printing quality.
  Printing Size
  • Small from the outside, but huge inside, the CraftBot PLUS has an impressive build volume of 9.8 x 7.9 x 7.9".
  Color LCD Touchscreen
  • The CraftBot PLUS has an intuitive, well-organized navigation menu that provides constant information on the printing process.
  Constant Control
  • Users can alter printing parameters any time by using the touchscreen - even during the printing process.
  Heatable & Removable Build Platform
  • Heating helps prevent warping and sticking, while the removable build platform is easier to clean.
  USB Connectivity
  • Connect and control printing directly by connecting your CraftBot PLUS 3D printer to your Windows system using a USB cable.
  Direct USB Drive Information Loading
  • The easiest way to upload your sliced 3D model to CraftBot's memory is using a USB memory stick. In the box, you will find a USB drive with samples so you can immediately test your device.
  CraftWare
  • CraftWare is 3D printing software with a user-friendly graphical interface. Its advanced slicing algorithm helps ensure faster conversions and better results.
• Plexiglass Door for the CraftBot 2 and PLUS 3D Printers Designed for the CraftBot 2 and CraftBot PLUS 3D Printers, the Plexiglass Door from CraftUnique helps to enclose the print chamber.

  Compatibility

  • CraftBot 2 3D Printer
  • CraftBot PLUS 3D Printer
• Perforated Build Plate for the CraftBot 2 and PLUS 3D Printers Designed for the CraftBot 2 and CraftBot PLUS 3D Printers, the Perforated Build Plate from CraftUnique works well with most standard printing materials, but has been created especially for ABS and other exotic filaments that have a tougher time building a strong adhesion to the printing surface in its base layer. This buildplate has been constructed using a mixture of fiberglass and copper, as well as gold plating that helps protect against oxidation and retain conductivity.
  
  Users printing with this buildplate must ensure that their prints are sliced beforehand with a "raft" in the base layers. Given the raft's structural characteristics, this further helps to ensure print adhesion.

  Compatibility

  • CraftBot 2 3D Printer
  • CraftBot PLUS 3D Printer

• USB Drive with Printing Samples

• Power Cord

• Limited 1-Year Warranty

Also Includes

• 3 x Spools of Filament
• Limited 1-Year Warranty

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• CraftBot PLUS 3D Printer (Anthracite Gray)

  Build Volume	9.8 x 7.87 x 7.9" / 25.0 x 20 x 20.0 cm
  Number of Extruders	1
  Layer Resolution	XY Axis: 100 to 300 micron / 0.1 to 0.3 mm (3 Settings)
  Supported Extruder Nozzle Diameter	400 micron / 0.4 mm
  Extruder Nozzle Temperature	356 to 500°F / 180 to 260°C
  Positioning Precision	XY Axis: 4 micron / 0.004 mm Z Axis: 2 micron / 0.002 mm
  Print Speed	50 to 200 mm/s
  Filament Compatibility	1.75 mm Diameter

  Build Area Type	Open
  Build Plate Features	Heated
  Build Plate Temperature	122 to 212°F / 50 to 100°C
  3D Scanner	No
  Monitoring Camera	No

  Wi-Fi	None
  Media Card Slots	None

  Supported Operating Systems	Windows 7 or Later
  Supported 3D File Types	.obj, .stl

  Operating Temperature	59 to 89°F / 15 to 32°C
  Storage Temperature	32 to 89°F / 0 to 32°C
  Dimensions (W x H x D)	15.75 x 18.11 x 17.72" / 40 x 46 x 45 cm
  Weight	30.9 lb / 14 kg
  Warranty Length	Limited 1-Year Warranty

  Box Dimensions (LxWxH)	20.0 x 19.0 x 17.5"

• Plexiglass Door for the CraftBot 2 and PLUS 3D Printers

  Dimensions	Not specified by manufacturer
  Weight	Not specified by manufacturer

  Box Dimensions (LxWxH)	18.5 x 12.0 x 1.25"

• Perforated Build Plate for the CraftBot 2 and PLUS 3D Printers

  Dimensions	Not specified by manufacturer
  Weight	Not specified by manufacturer

  Box Dimensions (LxWxH)	18.0 x 11.5 x 1.25"

Rating

Discussion