|
User Manual for Data-Tronix H.264 HDMI Encoder with VidCasterIP System Click to enlarge the picture
Contents of the user manual for the Data-Tronix H.264 HDMI Encoder with VidCasterIP
- Product category: Video Extenders & Repeaters Data-Tronix
- Brand: Data-Tronix
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Data-Tronix Video Extenders & Repeaters
|
User manual for the Data-Tronix H.264 HDMI Encoder with VidCasterIP contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Data-Tronix product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Data-Tronix user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Data-Tronix product will considerably shorten its lifespan!
|
Product description The H.264 HDMI Encoder with VidCasterIP System from Data-Tronix is used with H.264 decoders to deliver streaming media over IP networks, providing complete end-to-end streaming systems. This live encoder offers one HDMI input, two streaming media outputs, and one stereo audio de-embedding output. It employs standards-based H.264/MPEG-4 AVC encoding and supports input signals up to 1920 x 1200 @ 60 Hz.The encoder is capable of outputting two IP streams. One large IP stream supports a streaming resolution from 480p @ 60 Hz to 1920 x 1200 @ 60 Hz to view a video on the decoder side, while the other small one supports resolution 352 x 288 @ 5 Hz to easily fully-preview video from an encoder on PC software or iPad. The encoder supports PoE and can be remotely powered by compatible power source equipment such as a PoE Ethernet switch, thus eliminating the need for a nearby power outlet.The encoder offers integration-friendly control features such as PC configurator and IP controller providing simple, flexible control and management options. In addition, it includes RS-232 pass-through capacity to control a third-party device, such as a projector, through IP configurator and IP controller on your computer. Encoding control provides adjustments for encoding bit rate and quality. By extending A/V signals over networks, A/V system capability is significantly expanded. The VidCasterIP System offers solutions for conference rooms, shopping malls, hotels, high-resolution signage, monitoring centers, schools, corporate training environments, and more. - Key Features
-
- Streams HDMI signals over IP networks
- Supports live IP video stream encoding
- Use with H.264 decoders to provide complete end-to-end streaming systems
- Features one HDMI input, two streaming media outputs, and one stereo audio de-embedding output
- Supports the resolutions of input signals up to 1920 x 1200 @ 60Hz
- Capable of outputting two IP streams
- One large IP stream supports a streaming resolution from 480p @ 60 Hz to 1920 x 1200 @ 60 Hz to view video on the decoder side, while the other small one supports a resolution of 352 x 288 @ 5 Hz to easily fully-preview video from an encoder on PC software or iPad
- Offers integration-friendly control features such as PC configurator and IP controller
- Offers RS-232 pass-through capacity to control a third party device, such as a projector, through IP configurator and IP controller on your computer
- Use with the IP controller for matrix control and management via LAN (Telnet & Web GUI), as well as for allowing the third party control system to configure and manage the streaming systems
- Supports PoE to be remotely powered by compatible power source equipment, eliminating the need for a nearby power outlet
- Employs standards-based H.264/MPEG-4 AVC video encoding
- Supports HDCP
- Configurable encoding data rate up to 30 MB/s
- Supports AutoIP, zero-configuration networking (zeroconf), a set of special technologies that automatically assign dynamic IP addresses to encoders on startup and a server-less method of choosing an IP address
- Supports communication protocols used on the Internet such as IP, TCP, UDP, IGMP, and Telnet
UPC: 819210011825 In the Box Data-Tronix H.264 HDMI Encoder with VidCasterIP System Power Adapter (12 VDC, 1A) Detachable Plug 2 x 3-Pin 3.5mm Phoenix Connector (Male) 2 x Mounting Ear Limited 1-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Data-Tronix H.264 HDMI Encoder with VidCasterIP System in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersData-Tronix DT-HDVD-IPSTR-ENC Specs | | | Input Port | 1 x HDMI In | | Input Type | HDMI 1.3 | | Input Resolutions | 1920 x 1200 @ 60 Hz
1920 x 1080p @ 60/50/30/25/24 Hz
1680 x 1050 @ 60 Hz
1440 x 900 @ 60 Hz
1400 x 1050 @ 60 Hz
1366 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
1280 x 1024 @ 60 Hz
1280 x 800 @ 60 Hz
1280 x 720p @ 60/50 Hz
1024 x 768 @ 60 Hz
800 x 600 @ 60 Hz
720 x 576p @ 50 Hz
720 x 480p @ 60 Hz
640 x 480 @ 60 Hz | | Input Signal | 0.5 to 1.2 Vpp | | Encoding Data Rate | Up to 30 MB/s, configurable | | Output Port | 1 x LAN | | Output Type | H.264/MPEG-4 AVC | | Output Resolution | Large IP Stream: 480p @ 60 Hz to 1920 x 1200 @ 60 Hz
Small IP Stream: 352 x 288 @ 5 Hz | | Impedance | 100 Ohms | | Input DDC Signal | 5 Vpp (TTL) | | End to End Latency | About 79 ms in average (Low-latency mode)
About 250 ms in average (High-quality mode) | | | | Input Port | 1 x HDMI | | Input Format | Audio embedded in HDMI input | | Output Port | 1 x Phoenix connector | | Output Format | Stereo analog line level signal | | | | Control Method | PC configurator and IP controller | | | | Operating Temperature & Humidity | 32 to +113°F / 0 to +45°C
10 to 90%, Non-condensing | | Storage Temperature / Humidity | -4 to 140°F / -20 to +70°C
10 to 90%, Non-condensing | | Power | 12 VDC, 1 A | | Power Consumption | 6 W (Maximum)
Powered by PoE: 10 W (Minimum) for safe operation | | ESD Protection | Human Body Model:
±8 kV (Air-gap discharge)
±4 kV (Contact discharge) | | Surge Protection | Voltage: ±1 kV | | Certification | CE, FCC, RoHS compliant | | Dimensions (W x H x D) | 9.3 x 1.0 x 3.7" / 24.0 x 2.5 x 94.0 cm | | Weight | 1.1 lb / 0.5 kg | | | | Box Dimensions (LxWxH) | 12.2 x 7.1 x 3.0" |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 98 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
NEWER F100 CAMERA MONITOR...
PhotoStage progessional...
powerpint...
Night Detective Quest 5M 5x Night Vision Monocular ...
Ibanez AM93QM User Manual....
|
|
