User manual
Dedolight DLH1200D Focusing Daylight with AC,

User Manual for Dedolight DLH1200D Focusing Daylight with AC, DMX Ballast and Barndoor

• Product category: HMI & Plasma Lights Dedolight
• Brand: Dedolight
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Dedolight HMI & Plasma Lights

Product description

• DLH1200D HMI Lamp Head The DLH1200D HMI Lamp Head from Dedolight provides impressive output backed with the advanced features that you'd expect from a manufacturer of Dedo's stature. The finely tuned optical system uses a patented two-lens configuration combined with unique mirror and lens movement that effectively suppresses spill light while yielding a wide 1:18 focusing range that can be increased to 1:50 with an optional aspherical wide angle lens attachment. Channels on the front of the fixture accept barn doors and other accessories including a condenser back-end module that permits use of all projection attachments and lenses from Series 400 lights. Available for separate purchase, the DLH1200D's required dedicated ballast allows use of the fixture with 90-264 VAC mains power, DMX control and 50-100% dimming. Both the head and the optional ballast offer rainproof construction.
  Attributes and Benefits
  • High light output
  • Wide focus range
  • Highly accurate color rendering
  • Rainproof - high IP rating
  • Swing away side lamping
  • On/Off on both head and optional ballast
  High Efficiency Convection Cooling
  • Full air intake on the bottom of the light
  • Extra air intakes between the inner and outer housings
  • Air gap around the front lens
  • Low front air intake provides airflow between the two lenses (important in flood position)
  High Range of Intensity Change While Maintaining Color
  • Calculated boosting of output without noticeably affecting lifetime of the lamp while maintaining color stability
  • Continuous dimming only to the point beyond which color change would occur (with optional ballast)
  Low UV
  • Extremely low UV values, approx. 1/20 the value shown by other lights
• DEB1200D Electronic Ballast (90 - 264 VAC) Designed to power the DLH1200D HMI Lamp Head, the DEB1200D Electronic Ballast from Dedolight features DMX control, advanced heat dissipation and multi-voltage compatibility. No effort has been spared to safeguard the unit's operation and maintain consistency of the output. Surge, overload and short-circuit protection are employed to guard against electrical spikes while PFC (active Power Factor Correction) maintains consistent current. The switchable silent ventilator remains off during normal operation and operates only under high heat conditions. The unit is dimmable from 50 - 100% via DMX and like the lamp head, features rainproof construction.
  Attributes
  • Low heat dissipation
  • Silent ventilator remains off during normal operation and operates under high heat conditions only
  • Active Power Factor Correction (PFC)
  • Functional range from 90 - 264 VAC
  • Overload protection
  • Surge protection
  • Short circuit protection
  • Auto start function
  • DMX control
  • Rainproof construction
  • Ballast features 30 second "book-type" access to all elements and electronics
• Head Cable for DLH1200D The 23' Dedolight Head Cable for DLH1200D connects the DLH1200D Daylight Light Head to its DEB1200D Electronic Ballast.
• Hard Case for DLH1200 Light Heads This Hard Case is designed to protect a DLH1200 series light head during transport.
• Transport Hard Case for DEB1200D Electronic Ballast The Dedolight Hard Case is used to transport the DEB1200D Electronic Ballast.

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• Limited 1-Year Warranty

• Limited 30-Day Warranty

Also Includes

• DBD1200R Barn Door
• 2 x 1200W Daylight lamp with G22 Socket

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• DLH1200D HMI Lamp Head

  Light Source	HMI
  Rating	1,200 W
  Lamp	Optional DL1200DHR, 1200 W, G22 Base
  Lens (Condenser)	Aspherical
  Focus Adjustment	Standard: 1:18 With aspherical attachment: 1:50
  Mounting	Dual: 5/8" (16 mm), 1 1/8" (28 mm)
  Weight	23 lb (10.5 kg)
  Dimensions	11.5 x 12.9 x 10.7" (292 x 328 x 270.5 mm) Without yoke extended

• DEB1200D Electronic Ballast (90 - 264 VAC)

  Output	1,200 W
  Voltage Requirements	90 - 264 VAC
  DMX	Yes
  Fan	Switchable Silent Mode function
  Water Resistance	Rainproof
  Indicators	3 Status LEDs: Ready, Lamp Heat
  Dimensions	12.95 x 9.0 x 9.07" (329 x 228 x 230 mm)
  Weight	25 lb (11.4 kg)

• Head Cable for DLH1200D

  Length

  23' (7.0 m)

• Hard Case for DLH1200 Light Heads

  Exterior Dimensions (W x H x D)	2.3 x 1.2 x 1.4' / 71 x 37 x 43 cm
  Weight	32 lb / 14.5 kg

• Transport Hard Case for DEB1200D Electronic Ballast

  Exterior Dimensions	28.0 x 17.0 x 11.8" / 71.1 x 43.2 x 30.0 cm
  Watertight	No
  Weight	26.0 lb / 11.8 kg

Rating

Discussion