|
User Manual for DPA Microphones d:vice MMA-A Digital Audio Interface and Double Lavalier Kit Click to enlarge the picture
Contents of the user manual for the DPA Microphones d:vice MMA-A Digital Audio
- Product category: Audio Interfaces & Systems DPA Microphones
- Brand: DPA Microphones
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for DPA Microphones Audio Interfaces & Systems
|
User manual for the DPA Microphones d:vice MMA-A Digital Audio contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any DPA Microphones product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official DPA Microphones user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a DPA Microphones product will considerably shorten its lifespan!
|
Product description The d:vice MMA-A Digital Audio Interface and Double Lavalier Kit from Lectrosonics includes an MMA-A Digital Audio Interface, two d:screet DPA SC4060-BM omnidirectional microphones, two SCM0013-B 4-way clips for microphones, and a DUA0560 5-pack of foam windscreens. The kit can be used to capture audio for a dual interview situation with a mic on each person. In addition, it can also be used to create a stereo recording on a mobile phone or tablet device. The MMA-A Digital Audio Interface is a dual-channel microphone preamplifier and A/D converter that captures audio via your favorite recording and broadcasting apps. It can be used with all DPA microphones with a microdot connector. At about two inches in diameter, the MMA-A is ultra-compact, easily fits in your pocket, and is controlled through a remote application on any iOS device. The d:screet SC4060-BM omnidirectional microphone is natural sounding, offering good detail and resolution. It has a low-noise floor, impressive sensitivity, and can handle high SPL. It picks up sound no matter which direction the microphone is placed in. The holder is designed to minimize clothing noise too. It can be mounted on lapels, shirts, and neckties. - d:vice 2-Channel Mobile Audio Interface for iOS, Mac Windows The d:vice from DPA Microphones is a mobile A/D audio interface developed for content makers who need to capture high-fidelity audio with their smartphones or tablets, when on the go. The thin, portable design lets you discreetly wear the unit in your pocket, ideal when recording interviews, music or ambience for video, live broadcast, social media, and more.The d:vice features two high-quality microphone preamps with MicroDot connectors, which both provide phantom power to the company's lavaliers, shotguns and modular mic capsules, as well as to third-party mics equipped with MicroDot cables.The free DPA App allows you to set parameters before using the d:vice with a third-party app such as Skype, Facebook Live, and others. Choose between mono, dual-mono or stereo output modes, and independently control the level of each mic. The App also lets you store four presets, allowing for quick setup to suit specific tasks.The unit connects to all iOS devices using the Lightning connector or to Windows and Mac computers via the included USB Micro-B to USB Type-A cable.
- Compact audio interface for content makers who need to capture high-fidelity audio on their smartphones or tablets
- Ideal for video, live broadcast, social media, on-location music recording, and more
- 2-channel microphone preamplifier, with MicroDot inputs and phantom power – connect lavalier mic, shotgun mic, modular mic capsule or any third-party mic with MicroDot connector
- Choose between three output modes: Mono for one mic on one person, dual-mono for two people with both mic signals mixed down to mono, stereo for music or ambience recording
- Thin, portable design – discretely fits in pockets
- Works with third-party Apps supporting Core Audio – Facebook Live, Skype, LiveU, AviWest, and more
- Free DPA App lets you set parameters before using d:vice with third-party App – four presets can be saved by user, allowing quick setup for specific tasks
- Connects to all iOS devices using Lightning connector or to Windows and Mac devices via included USB Micro-B to USB Type-A cable
- d:screet 4060 Omnidirectional Miniature Microphone with MicroDot Connector (Black) The black d:screet 4060 Omnidirectional Miniature Microphone with MicroDot Connector from DPA is a miniature lavalier microphone designed for use in performance and theatrical applications. The 4060 lavalier features a condenser element with a frequency and sensitivity response that will accurately reproduce audio signals from the human voice and instruments. The capsule is designed with a double vent protection system and moisture resistant materials inside the capsule, which ensure maximum protection from humidity and moisture caused by perspiration, makeup, etc.The 4060 includes interchangeable capsule protection grids that alter the signal character of the microphone. A High-Boost Grid creates a peak at 12 kHz, creating an airy texture to audio signals. The Soft-Boost Grid creates a subtle boost between 8-20 kHz, enhancing signal presence. With a SPL rating of 134 dB, the microphone is more than capable of reproducing transient (peaking) audio before clipping. The 4060 features a MicroDot output connector, compatible with various wireless microphone transmitters or power supplies with standard XLR outputs.
- Moisture Resistant
- The 4060 features a double vent protection grid and moisture resistant materials, which prevent damage from humidity, perspiration and makeup.
- Frequency Altering Grids
- The microphone includes "High Boost" and "Soft Boost" protection grids that alter the frequency response and accentuate high-frequency signals.
- Sensitive Condenser
- The condenser element provides a wide frequency response while boasting an SPL rating of 134 dB.
- Omnidirectional Polar Pattern
- The omnidirectional polar pattern effectively captures audio at the direct and off-axis sections of the capsule.
- d:screet SCM0013-B, 4-Way Clip for d:screet Lavalier Microphones (Black) The black d:screet SCM0013-B, 4-Way Clip for d:screet Lavalier Microphones from DPA allows you to mount the mic in an upwards, downwards, left- or right-side position. It can be used with omnidirectional microphones that pick up sound no matter which direction the microphone is facing. Note: This clip does not fit d:screet heavy-duty mics.
- Upwards / downwards mounting
- Left- / right-side mounting
- Multiple cable-management mounts
- Foam Windscreens for 4060, 4061, 4062, 4063, 4071 (5-Pack, Black) The 5-pack of black DUA0560 Foam Windscreens for DPA Microphones 4060, 4061, 4062, 4063, 4071 reduces speaking and environmental noise for 4060, 4061, 4062, 4063, 4071 Series miniature omnidirectional microphones.
In the Box Bundle Items d:vice 2-Channel Mobile Audio Interface for iOS, Mac Windows fwevzsbzec - USB Micro-B to USB Type-A Cable
2 x d:screet 4060 Omnidirectional Miniature Microphone with MicroDot Connector (Black) - High-Boost Protection Grid
- Soft-Boost Protection Grid
2 x d:screet SCM0013-B, 4-Way Clip for d:screet Lavalier Microphones (Black) Foam Windscreens for 4060, 4061, 4062, 4063, 4071 (5-Pack, Black)
Also Includes Table of Contents
|
Upload User Manual
Have you got an user manual for the DPA Microphones d:vice MMA-A Digital Audio Interface and Double Lavalier Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - d:vice 2-Channel Mobile Audio Interface for iOS, Mac Windows
| Input Connector | 2 x MicroDot | | Phantom Power | 5 V to 50 V | | | | Box Dimensions (LxWxH) | 5.7 x 4.8 x 2.5" | - d:screet 4060 Omnidirectional Miniature Microphone with MicroDot Connector (Black)
| | | Sound Field | Mono | | Operating Principle | Pressure Operated | | Transducer | Condenser | | Polar Pattern | Omnidirectional | | Frequency Range | 20 Hz to 20 kHz | | Signal to Noise Ratio | 71 dB A-Weighted | | Equivalent Noise Level | 26 dB A-Weighted | | Maximum SPL | 134 dB SPL Peak | | THD | < 1% | | Impedance | 40 Ohms | | Sensitivity | 20 mV/Pa at 1 kHz | | Dynamic Range | 100 dB A-Weighted | | | | Output Connector | Microdot | | Cable Length | 5.9' / 1.80 m | | Operating Voltage | 5 to 50 V | | Operating Humidity | 0 to 90% (Recommended) | | Length | 0.5" / 1.27 cm | | Diameter | 0.21" / 5.33 mm | | Weight | 0.26 oz / 7 g | | | | Box Dimensions (LxWxH) | 4.3 x 2.75 x 1.0" | - d:screet SCM0013-B, 4-Way Clip for d:screet Lavalier Microphones (Black)
| Compatible Models | d:screet: Lavalier microphones Slim 4060 omnidirectional microphone, hi-sens Slim 4061 omnidirectional microphone, lo-sens 4060 omnidirectional microphone, hi-sens 4061 omnidirectional microphone, lo-sens 4062 omnidirectional microphone, xlo-sens 4063 omnidirectional microphone, low-sens and DC 4071 omnidirectional microphone, low-cut, presence boost | | Dimensions | Not specified by manufacturer | | Weight | Not specified by manufacturer | | | | Box Dimensions (LxWxH) | 4.2 x 2.8 x 1.0" | - Foam Windscreens for 4060, 4061, 4062, 4063, 4071 (5-Pack, Black)
| | | Box Dimensions (LxWxH) | 4.3 x 2.8 x 1.05" |
Rating90% users recommend this product to others. And what about you?

This product has already been rated by 63 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Logitech MK850 Manual... Swan Bread maker SWBBA7... Expert intel sixcore i5-8400 4GHZ turbo... Color LaserJet Pro MFP M281fdw... call of duty world war II...
|
| Discussion |
Latest contributions to the discussion:
Query Name: Geoff Dibblee Carson zOrb Digital USB Microscope when useing the zorb it will not cover the whole of a stamp back or front as i am useing it for perfins stamps and whati have recived in the box just covers half a letter please can you help me to find away to enlarg the whole stamp
... Blown transformer Name: Dik Schouten Demeter VTDB-2 Single Channel Tube Direct Dear Sirs,where can i buy a new transformer for my VTDB 2b? If possible een 230 volt primary site...Y.S. Dik Schouten
... Battery charger light does not turn yellow or green when charging LP-E17 Name: DAVE Canon LC-E17 Charger for LP-E17 Battery I have a new Canon battery charger for EOS R10 Camera. It has lights that turn yellow and green when charging the Canon battery that came with the camera. But when I put in the BM battery LP-E17 no lights come on. I can tell the battery is charged when I put it in the camera, b... Stiff center dial wheel Name: Reynolds, Jane Tasco 10x50 Essentials Porro Binocular It is very hard for me to turn the center wheel with the ridges on it.
Could you please email me the user manual for the Tasco 10 x 50 mm zip focus? Thank you... Redfield 2-7x33 Name: Mike Redfield 2-7x33 Revolution Riflescope Can the elevation and windage knobs be reset to zero?
Thanks!...
|
|