User Manual for Elation Professional S-150 Series 150W Single-Output Switching Power Supply Click to enlarge the picture
Contents of the user manual for the Elation Professional S-150 Series 150W Single-Output
- Product category: AC Power Supplies Elation Professional
- Brand: Elation Professional
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Elation Professional AC Power Supplies
|
User manual for the Elation Professional S-150 Series 150W Single-Output contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Elation Professional product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Elation Professional user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Elation Professional product will considerably shorten its lifespan!
|
Product description The S-150 Series 150W Single-Output Switching Power Supply from Elation Professional provides an output of 24 VDC at 6.5A. This switching module can be used as a power supply for various equipment, and features a fixed switching frequency at 25 kHz. -
- AC input range selectable by switch
- Protection against short circuit, overload, and over-voltage
- Cooling by free air convection
- 100% full load burn-in test
- Fixed switching frequency at 25 kHz
UPC: 813127010995 Table of Contents
|
Upload User Manual
Have you got an user manual for the Elation Professional S-150 Series 150W Single-Output Switching Power Supply in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersElation Professional ELAR-S-150-24 Specs | | | DC Voltage | 24 VDC | | Rated Current | 6.5 A | | Rated Power | 156 W | | Ripple & Noise (max) | 240 m Vpp
(Ripple & noise measured at 20 MHz bandwidth by using 12" twisted-pair wire terminated with a 0.1 uf & 47 uf parallel capacitor.) | | Voltage Adjustable Range | 21 to 28 V | | Voltage Tolerance | ±1.0%,
(Tolerance: includes setup tolerance, line regulation, and load regulation) | | Line Regulation | ±0.2% | | Load Regulation | ±0.2% | | Setup, Rise Time | 100 ms, 50 ms at full load | | Hold | 28 ms at full load | | | | Voltage Range | 88 to 132 VAC / 176 to 264 VAC selected by switch, 248 to 370 VDC | | Frequency Range | 47 to 63 Hz | | Efficiency | 85% | | Input AC Current | 3.2 A, 115 VAC | | Inrush Current | Cold start 35 A | | Leakage Current | <3.5 mAh, 240 VAC | | | | Load Rating | Overload: 105 to 150% rated output power
Protection Type: Shut down o/p voltage, re-power on to recover | | Over Voltage Protection | 30 to 34.8 V
Protection Type: Shut down o/p voltage, re-power on to recover | | | | Working Temperature | 14 to 140°F / -10 to 60°C | | Operating Humidity | 20 to 90% RH, non-condensing | | Storage Temperature | -4 to 185°F / -20 to 85°C | | Storage Humidity | 10 to 90% RH, non-condensing | | Temperature Coefficient | ±0.03% per °C over 32 to 122°F / 0 to 50°C | | Vibration | 10 to 500 Hz, 2G 10 minute / 1 cycle, 60 minute each analog X, Y, Z axes | | | | Safety Standards | UL1012, UL60950-1, TUV EN60950-1 Approved | | Withstand Load | I/P-O/P: 3K VAC, I/P-FG:1.5K VAC, O/P-FG:0.5K VAC | | Isolation | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms, 500 VDC | | EMI | EMI Conduction and Radiation: Compliance to EN55022 (CISPR22) Class B | | Harmonic Current EMS Immunity | Compliance to EN16000-3-2, -3
EMS Immunity: Compliance to EN61000-4-2,3,4,5,6,8,11; EN50204, EN55024, Light industry level, criteria A | | | | MTBF | 286.7K hours min. MIL-HDBK-217F
77°F / 25°C | | Dimension | 7.83 x 4.33 x 1.96" / 19.9 x 11.0 x 5.0 cm | | Weight | 1.8 lb / 0.8 kg |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 16 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
