|
User Manual for Electro-Voice RE20 2-Person Broadcaster Kit Click to enlarge the picture
Contents of the user manual for the Electro-Voice RE20 2-Person Broadcaster Kit
- Product category: Dynamic Microphones Electro-Voice
- Brand: Electro-Voice
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Electro-Voice Dynamic Microphones
|
User manual for the Electro-Voice RE20 2-Person Broadcaster Kit contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Electro-Voice product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Electro-Voice user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Electro-Voice product will considerably shorten its lifespan!
|
Product description This Kit includes two Electro-Voice RE20 large-diaghragm broadcast dynamic microphones with mic suspension shockmounts, a two-channel Cloudlifter mic activator with 25 dB of transparent gain, and two broadcast arms with internal springs and integrated XLR cables. With voice-tailored tone, enhanced hum rejection, built-in plosive protection, and versatile positioning, the kit is ideal for two-person podcasts, radio show hosts, and announcers at home or in the studio. - 2 x Electro-Voice RE20 Broadcast Announcer Microphone with Variable-D A broadcast industry standard, the RE20 Broadcast Announcer Microphone with Variable-D from Electro-Voice is a cardioid dynamic microphone that delivers reliable, low-noise performance with exceptional clarity and definition.
- Tailored Response
- Response tailored especially for vocals with high sound pressure handling capabilities
- Construction
- Rugged, steel construction with low handling noise
- Supercardioid Pattern
- The RE 20 features a supercardioid polar pattern which is extremely effective in isolating sound sources while reducing background noise
- Internal Windscreen
- An internal blast and wind filter eliminates pop and wind noise at the closest proximity
- Bass Tilt Down Switch
- The bass tilt switch corrects spectrum balance for use in long reach situations and eliminates low frequency noise and rumble
- Flat Frequency Respone
- The RE20's flat frequency response remains flat even at extremely close proximities
UPC: 701001000098 - Cloud Microphones Cloudlifter CL-2 Mic Activator The Cloudlifter CL-2 Mic Activator from Cloud Microphones is a compact, dual-input solution for common audio problems in the field and in the studio involving low-output passive microphones, including ribbons. The CL-2 uses any standard phantom-powered mixer or microphone input device to provide up to +25 dB of clean, transparent gain. This improves signal-to-noise ratio and improves the performance of passive microphone signals by driving stronger, cleaner signals over longer XLR cable runs, making them ideal for broadcast, live, and studio applications. The CL-2 is housed in a rugged steel enclosure which offers shielding and durability.
- Transparent Gain
- Gives passive mics up to +25 dB additional active output and keeps the direct audio path free-and- clear of transformers, capacitors, and resistors. The CL-2 houses discrete JFET circuitry that delivers clean gain while preserving the natural sonic characteristics of the source
- Useful for a Variety of Applications
-
- Use with noisy or low-gain preamps
- Use with mixers/preamps that negatively impact the sound at higher gain setting
- Use with low-output dynamic microphones and ribbons
- Mic softer sound sources such as acoustic instruments and voice
- Use for long cable runs
- Features at a Glance
-
- Gives passive mics up to +25 dB additional active output
- Provides 2 distinct stages of clean gain
- Easy to use self-contained design requires only phantom power
- Recommended for use with all passive dynamic microphones
- Compatible with tube, battery, or power supply driven microphones
- Safe for all passive ribbons with no transfer of phantom
- Utilizes Patent Pending Class A, Discrete JFET circuitry
- Ideal impedance loading for optimal performance @ 3 kOhms
- Rugged, road ready, and portable, for studio, stage, and broadcasting
UPC: 094922484215 - 2 x Auray SSM-BC10 Microphone Suspension Shockmount (Black Matte) The black matte SSM-BC10 Microphone Suspension Shockmount from Auray is designed to keep your front-address microphone free from vibrations and noise that can often affect broadcast and voiceover applications. The heavy-duty bands isolate your microphone, eliminating the vibrations that can travel through your mic stand or broadcast arm.
The shockmount is equipped with a standard 5/8"-27 threaded socket and fits most mic stands and broadcast arms. Its locking knob and protective inner ring secure your mic in place while protecting its finish. The swiveling basket allows for precise microphone placement. - Eliminates Noise
- The SSM-BC10 prevents unwanted vibrations that can radiate through a mic stand or broadcast arm from disrupting your broadcast or recording
- Swiveling Basket with Tension Knobs
- The swiveling basket provides precise microphone positioning. Dual tension knobs maintain the angle of the microphone while still allowing smooth repositioning
- 5/8"-27 Thread
- The SSM-BC10 features a mic stand adapter with a standard 5/8"-27 thread that is compatible with most mic stands and broadcast arms
- Locking Knob with Inner Ring
- The locking knob holds the microphone firmly in place. The inner ring applies uniform pressure to the outside of the microphone and prevents damage to the microphone finish
- All-Metal Construction
- The SSM-BC10 is a durable studio accessory that is built to last. The all-metal construction assures security and protection for the microphone
- Heavy-Duty Elastic Bands
- The heavy-duty elastic bands suspend the microphone in the center of the basket, and prevent shocks and vibrations that can radiate through the mic stand or broadcast arm from reaching the microphone
- Black Matte Finish
- Using the SSM-BC10 for on-air broadcast, the black matte finish will not reflect lights into the cameras
UPC: 847628585188 - 2 x Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable The Auray BAI-2X is a two-section broadcast arm with internal springs and an integrated XLR cable. This versatile and sturdy broadcast arm is great for studio as well as home use. It's ideal for broadcast, voiceover, and podcasts.
The BAI-2X broadcast arm is designed with internal springs that provide a clean and sleek look. The internal balance springs are precision engineered to support and hold in place microphones of up to 5 lb. (2.27 kg). The design also minimizes handling noise when re-positioning the arm. The broadcast arm features a standard 5/8"-27 microphone stud mount that is compatible with most shockmounts and microphone clips. The angle of the microphone stud mount can be adjusted and secured with the locking knob, and the angle is maintained when re-positioning the arm. This eliminates the need to readjust it every time the arm is moved. With an extension of up to 40 inches, and the ability to rotate the arm 360°, the BAI-2X allows for precise microphone placement.
The BAI-2X also features a heavy-duty combo mount that consists of a sturdy C-clamp and a heavy-metal desktop mount. The C-clamp is capable of fastening onto desktops up to 2.3" thick. The C-clamp's slim design minimizes the clearance needed to mount it between a desk and wall. The desktop mount detaches from the C-clamp and provides the option of permanent installation to a desktop with the mounting screws (included). A 14" riser is included for adding height to the broadcast arm in order to extend over computer or studio monitors. - Versatile
- Ideal for studios as well as home use
- Internal Springs
- Internal springs provide smooth, noise-free positioning and clean and sleek profile
- Sturdy
- Supports microphones up to 5 lb. (2.27 kg)
- Compatibility
- The 5/8"-27 standard microphone thread is compatible with most shockmounts and microphone clips
- Precision
- Extends up to 40" (101.6 cm) and rotates 360° allowing for precise microphone placement
- XLR Cable
- The integrated 15-foot (457.2 cm) XLR cable provides a secure, locking connection and excellent signal transfer
- Extra Height
- A 14" (13.6 cm) riser is included. It provides extra height to the broadcast arm for extending over computer or studio monitors
- Combo Mount
- The heavy-duty combo mount is comprised of a C-clamp for clamping to a desktop up to 2.3-inch (5.8 cm) thick, and a detachable desktop mount for permanent attachment to a desktop with the included screws
- 14" Riser
- The included riser adds 14" of height to the broadcast arm so that it can easily extend over computer or studio monitors
UPC: 847628578272 In the Box - 2 x RE20 Broadcast Announcer Microphone with Variable-D cwyaqsudwezfcwvzatavrbfavfu
- 81715 Stand Adapter
- Limited 2-Year Warranty
- Cloud Microphones - Cloudlifter CL-2 Mic Activator
- 2 x Auray - SSM-BC10 Microphone Suspension Shockmount (Black Matte) cwyaqsudwezfcwvzatavrbfavfu
- 2 x Auray - BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable
Table of Contents
|
Upload User Manual
Have you got an user manual for the Electro-Voice RE20 2-Person Broadcaster Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - 2 x Electro-Voice RE20 Broadcast Announcer Microphone with Variable-D
| Transducer | Dynamic | Polar Pattern | Cardioid | Frequency Range | 45 Hz to 18 kHz | Load Impedance | 150 Ohms | Sensitivity | 1.5 mV/Pa | | Output Connectors | 1 x 3-Pin XLR | Length | 8.54" / 216.92 mm | Diameter | 2.13" / 54.10 mm | Weight | 26 oz / 737 g | | Box Dimensions (LxWxH) | 12.05 x 7.0 x 3.45" | - Cloud Microphones Cloudlifter CL-2 Mic Activator
I/O | 2x XLR input 2x XLR output | Input Impedance | 3 kOhms | Gain | +25 dB | | Box Dimensions (LxWxH) | 5.75 x 5.35 x 2.4" | - 2 x Auray SSM-BC10 Microphone Suspension Shockmount (Black Matte)
Material | All-metal construction | Dimensions (H x W x L) | 10.0 x 6.5 x 5.0" (25.4 x 16.5 x 12.7 cm) | Weight | 1.1 lb (499 g) | | Box Dimensions (LxWxH) | 9.9 x 6.7 x 6.6" | - 2 x Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable
Length | 40" (101.6 cm) | Weight Capacity | 5 lb (2.27 kg) | Microphone Mount | 5/8"-27 standard microphone thread | Clamping Range | 2.3" (5.8 cm) | Riser | 14" (35.56 cm) | Cable | XLR M to XLR F: 15' (457.2 cm) | Weight | 4.47 lb. (2.02 kg) | | Box Dimensions (LxWxH) | 23.5 x 7.4 x 3.5" |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 91 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
class 2 battery charger Rayovac model ps335... PNY USB-C 3.1... google Pixel 3a... Lenovo active pen 1
... canon mg 2525...
|
Discussion |
Latest contributions to the discussion:
Recharge Name: Sean Christopher Verch Motorola Talkabout T200 FRS GMRS Two-Way Ya can only recharge the battery that come with it with the USB cable won't charge the rechargeable battery's like energizer or Duracell ... Google Pixel 3 Name: Albert Miles Google Pixel 3 64GB Smartphone Is there a user manual available to download yet. I still wish to have one . My phone has frozen again, you cannot turn it off or on It comes to life again once its battery runs down and you have to put it on charge.. Any advice?... Delete info entered Name: Vickie & Robert Louthen Facebook Portal I have never used my Facebook Portal. My husband entered some items, how can I delete the info so I can sale the item. It was given to me as a gift. Thank You... query Name: Emile Martin SanDisk 128GB Ultra USB 3.0 Flash Hello, and thank you. How do I completely back up my Windows 10 computer including operating system, files, files on Google drive, and apps, so I can erase my computer's hard disk and reinstall the whole thing?... download or see the manual for vivobook s-14 Name: sue brown ASUS 14" VivoBook Flip 14 Multi-Touch i can't dl the manual without a charge..help please,,just want to see the laptop manual....
|
|