|
User Manual for Ensemble Designs BrightEye NXT 410-H Clean HDMI-HDCP-SDI Router with UDC Conversion Click to enlarge the picture
Contents of the user manual for the Ensemble Designs BrightEye NXT 410-H Clean
- Product category: Routers & Switchers Ensemble Designs
- Brand: Ensemble Designs
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Ensemble Designs Routers & Switchers
|
User manual for the Ensemble Designs BrightEye NXT 410-H Clean contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Ensemble Designs product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Ensemble Designs user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Ensemble Designs product will considerably shorten its lifespan!
|
Product description The BrightEye NXT 410-H Clean HDMI-HDCP-SDI Router from Ensemble Designs provides clean and quiet switching of HDCP encrypted content to its HDMI output alongside SDI and non-encrypted HDMI sources. It allows format conversion to take place while routing signals to destinations. The web browser user interface allows control and setup from virtually anywhere via any browser-enabled device, while the front panel controls allow complete configuration and control of the router without the use of a computer. - Cleanly Switch HDCP Content
-
- This router with up/down/cross conversion provides clean and quiet switching of HDCP encrypted content to its HDMI output, alongside SDI and non-encrypted HDMI sources. It lets you dissolve or cut between HDMI sources such as cameras or disk players, traditional SDI sources, and HDCP encrypted devices for output to an HDMI display or projector. The router’s built-in frame syncs ensure an instantaneous, clean switch, or dissolve between every source without flashing or unexpected black displays, even with completely asynchronous sources. Non-HDCP encrypted HDMI and SDI sources can be routed to SDI destinations independently and simultaneously. HDCP encrypted sources cannot be routed to SDI destinations.
- Use Encrypted and Non-Encrypted HDMI Alongside SDI Sources
-
- The ability to use HDMI and SDI sources alongside one another is perfect for live applications in remote trucks and news vehicles. Devices such as set-top boxes and Blu-ray players can be switched and mixed with SDI devices and HDMI cameras to the HDMI output, seamlessly and instantaneously.
- Convert While You Route
-
- This router with UDC conversion and clean, quiet switching allows format conversion to take place while routing signals to destinations. Various formats of HD and SD content can be converted to a common format and routed seamlessly to destinations. Standard definition sources can be upconverted to HD as part of the routing process, as well as cross converting from one HD format to another. You just select the SMPTE standard to output to a particular destination, and all sources routed to that destination will be converted to the format.
- Control from Anywhere
-
- The web browser interface allows control and setup from virtually anywhere via any browser-enabled device, while front panel controls allow complete configuration and control of the router without the use of a computer. In addition, it can be externally controlled through either a TCP/IP or DB9 connector under automation control.
- Router Salvos for Multi-Destination Simultaneous Routing
-
- You can use salvo memory registers to execute several routes simultaneously. Eight separate salvo registers can be created and then triggered with any browser-enabled device.
- Integrate HDMI and SDI I/O
-
- With both HDMI and SDI inputs and outputs, this router makes it easy to integrate and switch signals from all types of equipment, regardless of video format. Cameras with HDMI outputs can be used directly alongside SDI sources, and seamlessly routed to either HDMI or SDI outputs. The SFP (Small Format Pluggable) cage can be populated with dual SFPs that have fiber optic or other connectors, allowing you to determine the best connector for your installation. Adding SFPs gives you true flexibility in combining electrical BNC, HDMI, and fiber optic inputs and outputs.
- Control from Third-Party Devices
-
- This router can be controlled from third-party devices using serial protocols via TCP/IP, RS-232, and SNMP.
1 Please Note: If RS-232 control is desired, you need to specify at the time of purchase and your unit will come with the connector cable pre-installed. close - General Features
-
- Up/down/cross converter built-in
- Router for 3G/HD/SD-SDI and HDMI video
- Direct take mode
- Flexible I/O with the option to configure BNCs and SFPs as inputs or outputs
- Audio level adjustments
- LCD display with real-time full motion video of your sources
- Safe driving mode
- Built-in test signal generators
- Compact and rugged
- Genlockable and timeable
In the Box Ensemble Designs BrightEye NXT 410-H Clean HDMI-HDCP-SDI Router with UDC Conversion Limited 5-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Ensemble Designs BrightEye NXT 410-H Clean HDMI-HDCP-SDI Router with UDC Conversion in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersEnsemble Designs BENXT-410-H Specs | | | Number | 2 to 5, configurable, BNC, and SFP | | Signal Type | 1.485 Gb/s: HD-SDI, SMPTE 274M, 292M, 296M
2.97 Gb/s: HD-SDI, SMPTE 424M, 425M
270 Mb/s: SD-SDI, SMPTE 259M | | Impedance | 75 Ohms | | Return Loss | >15 dB | | Maximum Cable Length | 328.1' (100 m) for 1.485 Gb/s
984.3' (300 m) for 270 Mb/s | | | | Number | 1 | | Type | 1 Vpp composite video, PAL, NTSC, or tri-level sync | | Impedance | 75 Ohms | | Return Loss | >40 dB | | | | Number | 2 to 5, configurable, BNC, and SFP | | Type | 1.485 Gb/s HD-SDI, SMPTE 274M, 292M, 296M
2.97 Gb/s: HD-SDI, SMPTE 424M, 425M
270 Mb/s: SD-SDI, SMPTE 259M | | Processing | 12 and 16-bit | | Impedance | 75 Ohms | | Return Loss | >15 dB | | Maximum Cable Length | 328.1' (100 m) for HD
984.3' (300 m) for SD | | | | Number | Input: 4
Output: 3 | | Type | Input: HDMI 1.3
Output: HDMI 1.3 | | Format | Input: Supports HDMI signals which map to the video standards
Output: Supports HDMI signals which map to the video standards | | HDCP | HDMI output can be configured to generate HDCP encryption. This allows both encrypted and non-encrypted HDMI and SDI sources to be cleanly switched to this output. | | | | Supported Standards | 1080p: 50, 59.94, 60 Hz / SMPTE 424M, 425M, level A
1080p: 23.98, 24, 25 Hz / SMPTE 274M: -9, 10, 11
1080sF: 23.98, 24, 25 Hz / RP211: -14, 15, 16
1080i: 50, 59.94, 60 Hz / SMPTE 274M: -4, 5, 6
720p: 50, 59.94, 60 Hz / SMPTE 296M: -1, 2, 3
625i: 50 Hz
525i: 59.94 Hz | | | | Power | 12 V, 20 W, 100 to 230 VAC modular power supply | | Temperature Range | 32 to 104°F (0 to 40° C), ambient | | Relative Humidity | 0 to 95% (Non-condensing) | | Altitude | 0 to 10000' (0 to 3048 m) | | Dimensions (W × H × D) | 5.6 x 1.7 x 6.8" (14.3 x 4.2 x 17.1 cm) | | Weight | 1 lb (0.5 kg), including connectors and flange |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 96 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Go Pro FETCH Dog Harness ADOGM-001...
Trijacon ACOG USMC scope...
Pyle Pro BTA 62BT 6-Zone Stereo Receiver Bluetooth...
LG Gram 17 Laptop...
LG 300W 2.1 ch surround sound manual. It has the soundbar, subwoofer, wireless receiver for connected rear speakers and wireless controller. ...
|
| Discussion |
Latest contributions to the discussion:
lithium ion battery pack EN-EL5 3.7 V 1100mAh
Name: Jane Holland
Nikon EN-EL5 Lithium-Ion Battery
HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland
...
lithium ion battery pack EN-EL5 3.7 V 1100mAh
Name: Jane Holland
Nikon EN-EL5 Lithium-Ion Battery
HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland...
Settings access and setup
Name: Edwin Derks
Nuance PaperPort 14
I had a problem with Paperport loading. Through the remote efforts of a Tech was able to get back online, however, "settings" are only listed 1 - 5 with no action listed as was 'visibly' available, (i.e. Scan both sides, Black and White, Color, etc.)
1. how to change, 2. wha...
query
Name: Vudayagiri Balasubramanyam
Bose Wave SoundTouch Music System IV
how to set up my bose radio with my remote working-class ...
Hi. I didn’t even get a chance to try it once! :( plz help
Name: Eric Tasakovic
Keeley Dark Side Pedal
I ordered a dark side pedal second hand online for 20 bucks cheaper than it would have been to buy it new….20 measly bucks. Anyway…it didn’t come with a power supply. I messed up and accidentally plugged in a 9v ac output power supply in, instead of the required 9v dc. I’...
|
|
