|
User Manual for Ensemble Designs BrightEye NXT 450 Compact Router with H.264 Encoder Decoder and Up Down Cross Conversion Click to enlarge the picture
Contents of the user manual for the Ensemble Designs BrightEye NXT 450 Compact
- Product category: Streaming Media Solutions Ensemble Designs
- Brand: Ensemble Designs
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Ensemble Designs Streaming Media Solutions
|
User manual for the Ensemble Designs BrightEye NXT 450 Compact contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Ensemble Designs product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Ensemble Designs user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Ensemble Designs product will considerably shorten its lifespan!
|
Product description The BrightEye NXT 450 Compact Router from Ensemble Designs adds a high quality, high profile H.264 (MPEG-4) encoder to the BrightEye NXT family of compact routers. The Encoder produces both a high and low resolution output simultaneously. Any SDI input can be fed to the encoder through the built-in format converting Clean Switch, allowing seamless switching or mixing between all inputs. The independent decoder operates simultaneously, with baseband output in any desired format. The decoder output can be switched along with any other source to any destination. An NXT 450 can serve as a full duplex codec, supporting both an outgoing and incoming streaming path. Encoding and decoding are fully integrated with the full set of resources in the NXT 450. Encoded streams can be sent or received through IP networking or by direct DVB-ASI connections. The NXT 450 incorporates an RJ-45 Gigabit Ethernet port dedicated to streaming connectivity. The encoder output can be delivered by either unicast or multicast addressing modes over the IP connection. Two unicast outputs can be independently directed to any desired destination. The multicast output is limited to the immediate subnet that the NXT 450 is connected to, but can be received by multiple devices. In addition to IP outputs, a DVB-ASI formatted stream can be output through a BNC port, or by fiber with an SFP module. For each of these outputs, IP or ASI, there is independent selection of the high or low resolution stream. The NXT 450 can receive an IP stream from the media port, or ASI from any BNC or fiber input. This stream will be decoded to produce a baseband SDI signal with embedded audio. - Flexible Architecture
- Flexible I/O configuration allows on-the-fly changes to the number of inputs and router destinations. From 9 inputs and 2 outputs, to 2 inputs and 9 outputs, the NXT 450 adapts to different needs. The two SFP ports allow for fiber optic connections, HDMI I/O, or additional HD-BNC SDI connections. You can genlock the Clean Switches and TSGs using the external reference input or assign a Clean Switch to an output. The encoder is driven as a destination of the routing matrix, and the output of the decoder is a source to the matrix. You can feed any source to the encoder, and feed the decoder to any destination.
- Instantaneous Clean Switching and Format Conversion
- The NXT 450 contains two Clean Switches. When assigned to an output, they provide clean, quiet switching, even between asynchronous sources. The format conversion feature provides automatic conversion of inputs to the chosen output format. This makes it possible to cut and mix between different input formats. Frame synchronization in the Clean Switch is particularly valuable when assigned to the input of the encoder. It guarantees that the encoder receives continuous, uninterrupted synchronization, regardless of the timing or condition of the input signals.
- Multiple Control Options
- Control and configuration of the NXT 450 can be made from a variety of interfaces. The front panel provides a full motion, real time video display of sources and destinations. You can route signals and configure resources directly from the front panel or connect the RJ-45 control network port to a LAN, for control using the built-in web server. From smartphone, tablet, or laptop, you can view thumbnails of all the sources and destinations, make routing changes, and configure parameters of all the NXT 450 resources. Control from third-party devices can be accomplished by TCP/IP or RS-232 protocols. Or you can use the 5835 Control Panel to provide a fully customizable operator interface.
- Other Features
-
- Router for 3G, HD, SD SDI, fiber and HDMI video
- Simultaneous high quality, high profile MPEG encoder/decoder
- Advanced H.264 coding techniques give good performance at low bit rates
- Built-in dual up/down/cross converters
- Dual assignable clean switches for video and embedded audio for seamless routing
- LCD display with realtime full motion video of your sources
- Dissolve and Cut transitions
- Direct Take mode
- Audio breakaway
- 16-channel audio level adjustments
- Mix and shuffle audio
- System-wide configuration registers
- Programmable Salvo and Action Keys
- Front panel and web-based control
- Dual built-in test pattern generator with moving element option and slate ID
- PiP-Efx – Picture in Picture option
- Applications
-
- Mobile trucks
- House of worship
- Rental and staging market
In the Box Ensemble Designs BrightEye NXT 450 Compact Router with H.264 Encoder/Decoder and Up/Down/Cross Conversion Limited 5-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Ensemble Designs BrightEye NXT 450 Compact Router with H.264 Encoder Decoder and Up Down Cross Conversion in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersEnsemble Designs BENXT-450 Specs Encoder | Dual Rate: MPEG-4 Part 10 H.264 (ISO/IEC 14496/10)
Hi-Res: Encoding format matches input source
Lo-Res: Encoding format 640 × 360p
Bit Rate: Adjustable from 1 to 20 Mb/s | Profile | Hi-Res: Main and High
Lo-Res: Baseline, Main, and High | Level | Hi Res: 3 to 4.2
Lo-Res: 1.2 to 4.2 | SDI | Input Number: 2 to 9, configurable, BNC and SFP Signal Type: 270 Mb/s SD SDI SMPTE 259M 1.485 Gb/s HD SDI SMPTE 274M, 292M, 296M 2.97 Gb/s HD SDI SMPTE 424M, 425M Impedance: 75 Ohms Return Loss: >15 dB Max Cable Length: 984' (300 m) for 270 Mb/s; 328' (100 m) for 1.485 Gb/s Automatic input cable equalization Output Number: 2 to 9, configurable, BNC and SFP Type: 270 Mb/s SD SDI SMPTE 259M 1.485 Gb/s HD SDI SMPTE 274M, 292M, 296M 2.97 Gb/s HD SDI SMPTE 424M, 425M Processing: 12- and 16-bit Impedance: 75 Ohms Return Loss: >15 dB Max Cable Length: 328' (100 m) for HD; 984' (300 m) for SD (Belden 1694A) | Audio | 2 channels MP3 and AAC encoding
Bit Rate: 32 to 384 kb/s
Downmixing: Up to 16 incoming channels to stereo pair; user selectable | Reference Input | Number: One
Type: 1 Vpp composite video, PAL or NTSC or Tri-level sync
Impedance: 75 Ohms
Return Loss: >40 dB | HDMI Input & Output | 2 x Input 2 x Output Via SFP | Standards | 1080i 50, 59.94 or 60 Hz SMPTE 274M -4,5,6 720p 50, 59.94 or 60 Hz SMPTE 296M -1,2,3 1080p 23.98, 24 or 25 Hz, SMPTE 274M -9,10,11 1080p 50, 59.94, 60 Hz, SMPTE 424M, 425M, Level A 1080sF 23.98, 24 or 25 Hz, RP211 -14,15,16 625i 50, 525i 59.94, SMPTE 259M | Fiber I/O | 4 x Input 4 x Output Via SFP | Streaming | Outputs: 2 x Independent unicast streams; selectable Hi-Res or Lo-Res encoding 1 x Multicast stream; selectable Hi-Res or Lo-Res encoding DVB-ASI Stream: Selectable Hi-Res or Lo-Res routable to any output connector All four streaming outputs operate simultaneously. | Decoder | Decode from unicast, multicast or DVB-ASI MPEG-4 part 10 H.264 (ISO/IEC 14496/10) MPEG-2 (ISO/IEC 13818-2) | Output | Decoder Baseband: Resolution: User selectable; HD-SDI Routable to any destination Can be sent to cleanswitch for synchronization and glitch-free switching | Latency | Total End-to-End: 750 msec (encode/decode) | Network Connection | Control Port: RJ-45; 10/100 Media Port: RJ-45; 10/100/1000 | Power | 12 V, 35 W (100 to 230 VAC modular power supply) | Ambient Temperature | 32 to 104°F (0 to 40°C) | Relative Humidity | 0 to 95%, non-condensing | Altitude | 0 to 10,000' (0 to 3048 m) | Dimensions | 5.6 x 1.7 x 6.8" (14.3 x 4.2 x 17.2 cm) including connectors and flange | Weight | 1.75 lb (0.79 kg) |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 54 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Go Pro FETCH Dog Harness ADOGM-001... Trijacon ACOG USMC scope... Pyle Pro BTA 62BT 6-Zone Stereo Receiver Bluetooth... LG Gram 17 Laptop... LG 300W 2.1 ch surround sound manual. It has the soundbar, subwoofer, wireless receiver for connected rear speakers and wireless controller. ...
|
Discussion |
Latest contributions to the discussion:
lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland
... lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland... Settings access and setup Name: Edwin Derks Nuance PaperPort 14 I had a problem with Paperport loading. Through the remote efforts of a Tech was able to get back online, however, "settings" are only listed 1 - 5 with no action listed as was 'visibly' available, (i.e. Scan both sides, Black and White, Color, etc.)
1. how to change, 2. wha... query Name: Vudayagiri Balasubramanyam Bose Wave SoundTouch Music System IV how to set up my bose radio with my remote working-class ... Hi. I didn’t even get a chance to try it once! :( plz help Name: Eric Tasakovic Keeley Dark Side Pedal I ordered a dark side pedal second hand online for 20 bucks cheaper than it would have been to buy it new….20 measly bucks. Anyway…it didn’t come with a power supply. I messed up and accidentally plugged in a 9v ac output power supply in, instead of the required 9v dc. I’...
|
|